1 /* 2 * (C) Copyright 2010 3 * Texas Instruments Incorporated, <www.ti.com> 4 * Aneesh V <aneesh@ti.com> 5 * Steve Sakoman <steve@sakoman.com> 6 * 7 * See file CREDITS for list of people who contributed to this 8 * project. 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License as 12 * published by the Free Software Foundation; either version 2 of 13 * the License, or (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 23 * MA 02111-1307 USA 24 */ 25 #include <common.h> 26 #include <twl6030.h> 27 #include <asm/arch/sys_proto.h> 28 #include <asm/arch/mmc_host_def.h> 29 30 #include "sdp.h" 31 32 DECLARE_GLOBAL_DATA_PTR; 33 34 const struct omap_sysinfo sysinfo = { 35 "Board: OMAP4430 SDP\n" 36 }; 37 38 /** 39 * @brief board_init 40 * 41 * @return 0 42 */ 43 int board_init(void) 44 { 45 gpmc_init(); 46 47 gd->bd->bi_arch_number = MACH_TYPE_OMAP_4430SDP; 48 gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */ 49 50 return 0; 51 } 52 53 int board_eth_init(bd_t *bis) 54 { 55 return 0; 56 } 57 58 /** 59 * @brief misc_init_r - Configure SDP board specific configurations 60 * such as power configurations, ethernet initialization as phase2 of 61 * boot sequence 62 * 63 * @return 0 64 */ 65 int misc_init_r(void) 66 { 67 #ifdef CONFIG_TWL6030_POWER 68 twl6030_init_battery_charging(); 69 #endif 70 return 0; 71 } 72 73 void do_set_mux(u32 base, struct pad_conf_entry const *array, int size) 74 { 75 int i; 76 struct pad_conf_entry *pad = (struct pad_conf_entry *) array; 77 78 for (i = 0; i < size; i++, pad++) 79 writew(pad->val, base + pad->offset); 80 } 81 82 /** 83 * @brief set_muxconf_regs Setting up the configuration Mux registers 84 * specific to the board. 85 */ 86 void set_muxconf_regs(void) 87 { 88 do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array, 89 sizeof(core_padconf_array) / 90 sizeof(struct pad_conf_entry)); 91 92 do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array, 93 sizeof(wkup_padconf_array) / 94 sizeof(struct pad_conf_entry)); 95 } 96 97 #ifdef CONFIG_GENERIC_MMC 98 int board_mmc_init(bd_t *bis) 99 { 100 omap_mmc_init(0); 101 omap_mmc_init(1); 102 return 0; 103 } 104 #endif 105