1 /* 2 * (C) Copyright 2010 3 * Texas Instruments Incorporated, <www.ti.com> 4 * Steve Sakoman <steve@sakoman.com> 5 * 6 * See file CREDITS for list of people who contributed to this 7 * project. 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of 12 * the License, or (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 22 * MA 02111-1307 USA 23 */ 24 #include <common.h> 25 #include <asm/arch/sys_proto.h> 26 #include <asm/arch/mmc_host_def.h> 27 #include <asm/arch/clocks.h> 28 #include <asm/arch/gpio.h> 29 #include <asm/gpio.h> 30 31 #include "panda_mux_data.h" 32 33 #ifdef CONFIG_USB_EHCI 34 #include <usb.h> 35 #include <asm/arch/ehci.h> 36 #include <asm/ehci-omap.h> 37 #endif 38 39 #define PANDA_ULPI_PHY_TYPE_GPIO 182 40 41 DECLARE_GLOBAL_DATA_PTR; 42 43 const struct omap_sysinfo sysinfo = { 44 "Board: OMAP4 Panda\n" 45 }; 46 47 struct omap4_scrm_regs *const scrm = (struct omap4_scrm_regs *)0x4a30a000; 48 49 /** 50 * @brief board_init 51 * 52 * @return 0 53 */ 54 int board_init(void) 55 { 56 gpmc_init(); 57 58 gd->bd->bi_arch_number = MACH_TYPE_OMAP4_PANDA; 59 gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */ 60 61 return 0; 62 } 63 64 int board_eth_init(bd_t *bis) 65 { 66 return 0; 67 } 68 69 /** 70 * @brief misc_init_r - Configure Panda board specific configurations 71 * such as power configurations, ethernet initialization as phase2 of 72 * boot sequence 73 * 74 * @return 0 75 */ 76 int misc_init_r(void) 77 { 78 int phy_type; 79 u32 auxclk, altclksrc; 80 81 /* EHCI is not supported on ES1.0 */ 82 if (omap_revision() == OMAP4430_ES1_0) 83 return 0; 84 85 #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG 86 if (omap_revision() >= OMAP4460_ES1_0 || 87 omap_revision() <= OMAP4460_ES1_1) 88 setenv("board_name", strcat(CONFIG_SYS_BOARD, "-es")); 89 #endif 90 91 gpio_direction_input(PANDA_ULPI_PHY_TYPE_GPIO); 92 phy_type = gpio_get_value(PANDA_ULPI_PHY_TYPE_GPIO); 93 94 if (phy_type == 1) { 95 /* ULPI PHY supplied by auxclk3 derived from sys_clk */ 96 debug("ULPI PHY supplied by auxclk3\n"); 97 98 auxclk = readl(&scrm->auxclk3); 99 /* Select sys_clk */ 100 auxclk &= ~AUXCLK_SRCSELECT_MASK; 101 auxclk |= AUXCLK_SRCSELECT_SYS_CLK << AUXCLK_SRCSELECT_SHIFT; 102 /* Set the divisor to 2 */ 103 auxclk &= ~AUXCLK_CLKDIV_MASK; 104 auxclk |= AUXCLK_CLKDIV_2 << AUXCLK_CLKDIV_SHIFT; 105 /* Request auxilary clock #3 */ 106 auxclk |= AUXCLK_ENABLE_MASK; 107 108 writel(auxclk, &scrm->auxclk3); 109 } else { 110 /* ULPI PHY supplied by auxclk1 derived from PER dpll */ 111 debug("ULPI PHY supplied by auxclk1\n"); 112 113 auxclk = readl(&scrm->auxclk1); 114 /* Select per DPLL */ 115 auxclk &= ~AUXCLK_SRCSELECT_MASK; 116 auxclk |= AUXCLK_SRCSELECT_PER_DPLL << AUXCLK_SRCSELECT_SHIFT; 117 /* Set the divisor to 16 */ 118 auxclk &= ~AUXCLK_CLKDIV_MASK; 119 auxclk |= AUXCLK_CLKDIV_16 << AUXCLK_CLKDIV_SHIFT; 120 /* Request auxilary clock #3 */ 121 auxclk |= AUXCLK_ENABLE_MASK; 122 123 writel(auxclk, &scrm->auxclk1); 124 } 125 126 altclksrc = readl(&scrm->altclksrc); 127 128 /* Activate alternate system clock supplier */ 129 altclksrc &= ~ALTCLKSRC_MODE_MASK; 130 altclksrc |= ALTCLKSRC_MODE_ACTIVE; 131 132 /* enable clocks */ 133 altclksrc |= ALTCLKSRC_ENABLE_INT_MASK | ALTCLKSRC_ENABLE_EXT_MASK; 134 135 writel(altclksrc, &scrm->altclksrc); 136 137 return 0; 138 } 139 140 void set_muxconf_regs_essential(void) 141 { 142 do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_essential, 143 sizeof(core_padconf_array_essential) / 144 sizeof(struct pad_conf_entry)); 145 146 do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_essential, 147 sizeof(wkup_padconf_array_essential) / 148 sizeof(struct pad_conf_entry)); 149 150 if (omap_revision() >= OMAP4460_ES1_0) 151 do_set_mux(CONTROL_PADCONF_WKUP, 152 wkup_padconf_array_essential_4460, 153 sizeof(wkup_padconf_array_essential_4460) / 154 sizeof(struct pad_conf_entry)); 155 } 156 157 void set_muxconf_regs_non_essential(void) 158 { 159 do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_non_essential, 160 sizeof(core_padconf_array_non_essential) / 161 sizeof(struct pad_conf_entry)); 162 163 if (omap_revision() < OMAP4460_ES1_0) 164 do_set_mux(CONTROL_PADCONF_CORE, 165 core_padconf_array_non_essential_4430, 166 sizeof(core_padconf_array_non_essential_4430) / 167 sizeof(struct pad_conf_entry)); 168 else 169 do_set_mux(CONTROL_PADCONF_CORE, 170 core_padconf_array_non_essential_4460, 171 sizeof(core_padconf_array_non_essential_4460) / 172 sizeof(struct pad_conf_entry)); 173 174 do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_non_essential, 175 sizeof(wkup_padconf_array_non_essential) / 176 sizeof(struct pad_conf_entry)); 177 178 if (omap_revision() < OMAP4460_ES1_0) 179 do_set_mux(CONTROL_PADCONF_WKUP, 180 wkup_padconf_array_non_essential_4430, 181 sizeof(wkup_padconf_array_non_essential_4430) / 182 sizeof(struct pad_conf_entry)); 183 } 184 185 #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC) 186 int board_mmc_init(bd_t *bis) 187 { 188 return omap_mmc_init(0, 0, 0, -1, -1); 189 } 190 #endif 191 192 #ifdef CONFIG_USB_EHCI 193 194 static struct omap_usbhs_board_data usbhs_bdata = { 195 .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, 196 .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, 197 .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, 198 }; 199 200 int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor) 201 { 202 int ret; 203 unsigned int utmi_clk; 204 205 /* Now we can enable our port clocks */ 206 utmi_clk = readl((void *)CM_L3INIT_HSUSBHOST_CLKCTRL); 207 utmi_clk |= HSUSBHOST_CLKCTRL_CLKSEL_UTMI_P1_MASK; 208 sr32((void *)CM_L3INIT_HSUSBHOST_CLKCTRL, 0, 32, utmi_clk); 209 210 ret = omap_ehci_hcd_init(&usbhs_bdata, hccr, hcor); 211 if (ret < 0) 212 return ret; 213 214 return 0; 215 } 216 217 int ehci_hcd_stop(int index) 218 { 219 return omap_ehci_hcd_stop(); 220 } 221 #endif 222 223 /* 224 * get_board_rev() - get board revision 225 */ 226 u32 get_board_rev(void) 227 { 228 return 0x20; 229 } 230