1 /* 2 * Keystone2: DDR3 configuration 3 * 4 * (C) Copyright 2012-2014 5 * Texas Instruments Incorporated, <www.ti.com> 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #include <common.h> 11 12 #include <i2c.h> 13 #include <asm/arch/ddr3.h> 14 #include <asm/arch/hardware.h> 15 16 DECLARE_GLOBAL_DATA_PTR; 17 18 /* DDR3 PHY configuration data with 1600M rate, 8GB size */ 19 struct ddr3_phy_config ddr3phy_1600_8g = { 20 .pllcr = 0x0001C000ul, 21 .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), 22 .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), 23 .ptr0 = 0x42C21590ul, 24 .ptr1 = 0xD05612C0ul, 25 .ptr2 = 0, /* not set in gel */ 26 .ptr3 = 0x0D861A80ul, 27 .ptr4 = 0x0C827100ul, 28 .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK), 29 .dcr_val = ((1 << 10)), 30 .dtpr0 = 0xA19DBB66ul, 31 .dtpr1 = 0x32868300ul, 32 .dtpr2 = 0x50035200ul, 33 .mr0 = 0x00001C70ul, 34 .mr1 = 0x00000006ul, 35 .mr2 = 0x00000018ul, 36 .dtcr = 0x730035C7ul, 37 .pgcr2 = 0x00F07A12ul, 38 .zq0cr1 = 0x0000005Dul, 39 .zq1cr1 = 0x0000005Bul, 40 .zq2cr1 = 0x0000005Bul, 41 .pir_v1 = 0x00000033ul, 42 .pir_v2 = 0x0000FF81ul, 43 }; 44 45 /* DDR3 EMIF configuration data with 1600M rate, 8GB size */ 46 struct ddr3_emif_config ddr3_1600_8g = { 47 .sdcfg = 0x6200CE6Aul, 48 .sdtim1 = 0x16709C55ul, 49 .sdtim2 = 0x00001D4Aul, 50 .sdtim3 = 0x435DFF54ul, 51 .sdtim4 = 0x553F0CFFul, 52 .zqcfg = 0xF0073200ul, 53 .sdrfc = 0x00001869ul, 54 }; 55 56 #ifdef CONFIG_K2HK_EVM 57 /* DDR3 PHY configuration data with 1333M rate, and 2GB size */ 58 struct ddr3_phy_config ddr3phy_1333_2g = { 59 .pllcr = 0x0005C000ul, 60 .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), 61 .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), 62 .ptr0 = 0x42C21590ul, 63 .ptr1 = 0xD05612C0ul, 64 .ptr2 = 0, /* not set in gel */ 65 .ptr3 = 0x0B4515C2ul, 66 .ptr4 = 0x0A6E08B4ul, 67 .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK), 68 .dcr_val = ((1 << 10)), 69 .dtpr0 = 0x8558AA55ul, 70 .dtpr1 = 0x32857280ul, 71 .dtpr2 = 0x5002C200ul, 72 .mr0 = 0x00001A60ul, 73 .mr1 = 0x00000006ul, 74 .mr2 = 0x00000010ul, 75 .dtcr = 0x710035C7ul, 76 .pgcr2 = 0x00F065B8ul, 77 .zq0cr1 = 0x0000005Dul, 78 .zq1cr1 = 0x0000005Bul, 79 .zq2cr1 = 0x0000005Bul, 80 .pir_v1 = 0x00000033ul, 81 .pir_v2 = 0x0000FF81ul, 82 }; 83 84 /* DDR3 EMIF configuration data with 1333M rate, and 2GB size */ 85 struct ddr3_emif_config ddr3_1333_2g = { 86 .sdcfg = 0x62008C62ul, 87 .sdtim1 = 0x125C8044ul, 88 .sdtim2 = 0x00001D29ul, 89 .sdtim3 = 0x32CDFF43ul, 90 .sdtim4 = 0x543F0ADFul, 91 .zqcfg = 0x70073200ul, 92 .sdrfc = 0x00001457ul, 93 }; 94 #endif 95 96 #ifdef CONFIG_K2E_EVM 97 /* DDR3 PHY configuration data with 1600M rate, and 4GB size */ 98 struct ddr3_phy_config ddr3phy_1600_4g = { 99 .pllcr = 0x0001C000ul, 100 .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), 101 .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), 102 .ptr0 = 0x42C21590ul, 103 .ptr1 = 0xD05612C0ul, 104 .ptr2 = 0, /* not set in gel */ 105 .ptr3 = 0x08861A80ul, 106 .ptr4 = 0x0C827100ul, 107 .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK), 108 .dcr_val = ((1 << 10)), 109 .dtpr0 = 0x9D9CBB66ul, 110 .dtpr1 = 0x12840300ul, 111 .dtpr2 = 0x5002D200ul, 112 .mr0 = 0x00001C70ul, 113 .mr1 = 0x00000006ul, 114 .mr2 = 0x00000018ul, 115 .dtcr = 0x710035C7ul, 116 .pgcr2 = 0x00F07A12ul, 117 .zq0cr1 = 0x0001005Dul, 118 .zq1cr1 = 0x0001005Bul, 119 .zq2cr1 = 0x0001005Bul, 120 .pir_v1 = 0x00000033ul, 121 .pir_v2 = 0x0000FF81ul, 122 }; 123 124 /* DDR3 EMIF configuration data with 1600M rate, and 4GB size */ 125 struct ddr3_emif_config ddr3_1600_4g = { 126 .sdcfg = 0x6200CE62ul, 127 .sdtim1 = 0x166C9855ul, 128 .sdtim2 = 0x00001D4Aul, 129 .sdtim3 = 0x421DFF53ul, 130 .sdtim4 = 0x543F07FFul, 131 .zqcfg = 0x70073200ul, 132 .sdrfc = 0x00001869ul, 133 }; 134 #endif 135 136 int ddr3_get_dimm_params(char *dimm_name) 137 { 138 int ret; 139 int old_bus; 140 u8 spd_params[256]; 141 142 i2c_init(CONFIG_SYS_DAVINCI_I2C_SPEED, CONFIG_SYS_DAVINCI_I2C_SLAVE); 143 144 old_bus = i2c_get_bus_num(); 145 i2c_set_bus_num(1); 146 147 ret = i2c_read(0x53, 0, 1, spd_params, 256); 148 149 i2c_set_bus_num(old_bus); 150 151 dimm_name[0] = '\0'; 152 153 if (ret) { 154 puts("Cannot read DIMM params\n"); 155 return 1; 156 } 157 158 /* 159 * We need to convert spd data to dimm parameters 160 * and to DDR3 EMIF and PHY regirsters values. 161 * For now we just return DIMM type string value. 162 * Caller may use this value to choose appropriate 163 * a pre-set DDR3 configuration 164 */ 165 166 strncpy(dimm_name, (char *)&spd_params[0x80], 18); 167 dimm_name[18] = '\0'; 168 169 return 0; 170 } 171