1 /* 2 * K2G EVM : Board initialization 3 * 4 * (C) Copyright 2015 5 * Texas Instruments Incorporated, <www.ti.com> 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 #include <common.h> 10 #include <asm/arch/clock.h> 11 #include <asm/ti-common/keystone_net.h> 12 #include <asm/arch/psc_defs.h> 13 #include <asm/arch/mmc_host_def.h> 14 #include <fdtdec.h> 15 #include <i2c.h> 16 #include "mux-k2g.h" 17 #include "../common/board_detect.h" 18 19 #define K2G_GP_AUDIO_CODEC_ADDRESS 0x1B 20 21 const unsigned int sysclk_array[MAX_SYSCLK] = { 22 19200000, 23 24000000, 24 25000000, 25 26000000, 26 }; 27 28 unsigned int get_external_clk(u32 clk) 29 { 30 unsigned int clk_freq; 31 u8 sysclk_index = get_sysclk_index(); 32 33 switch (clk) { 34 case sys_clk: 35 clk_freq = sysclk_array[sysclk_index]; 36 break; 37 case pa_clk: 38 clk_freq = sysclk_array[sysclk_index]; 39 break; 40 case tetris_clk: 41 clk_freq = sysclk_array[sysclk_index]; 42 break; 43 case ddr3a_clk: 44 clk_freq = sysclk_array[sysclk_index]; 45 break; 46 case uart_clk: 47 clk_freq = sysclk_array[sysclk_index]; 48 break; 49 default: 50 clk_freq = 0; 51 break; 52 } 53 54 return clk_freq; 55 } 56 57 static int arm_speeds[DEVSPEED_NUMSPDS] = { 58 SPD400, 59 SPD600, 60 SPD800, 61 SPD900, 62 SPD1000, 63 SPD900, 64 SPD800, 65 SPD600, 66 SPD400, 67 SPD200, 68 }; 69 70 static int dev_speeds[DEVSPEED_NUMSPDS] = { 71 SPD600, 72 SPD800, 73 SPD900, 74 SPD1000, 75 SPD900, 76 SPD800, 77 SPD600, 78 SPD400, 79 }; 80 81 static struct pll_init_data main_pll_config[MAX_SYSCLK][NUM_SPDS] = { 82 [SYSCLK_19MHz] = { 83 [SPD400] = {MAIN_PLL, 125, 3, 2}, 84 [SPD600] = {MAIN_PLL, 125, 2, 2}, 85 [SPD800] = {MAIN_PLL, 250, 3, 2}, 86 [SPD900] = {MAIN_PLL, 187, 2, 2}, 87 [SPD1000] = {MAIN_PLL, 104, 1, 2}, 88 }, 89 [SYSCLK_24MHz] = { 90 [SPD400] = {MAIN_PLL, 100, 3, 2}, 91 [SPD600] = {MAIN_PLL, 300, 6, 2}, 92 [SPD800] = {MAIN_PLL, 200, 3, 2}, 93 [SPD900] = {MAIN_PLL, 75, 1, 2}, 94 [SPD1000] = {MAIN_PLL, 250, 3, 2}, 95 }, 96 [SYSCLK_25MHz] = { 97 [SPD400] = {MAIN_PLL, 32, 1, 2}, 98 [SPD600] = {MAIN_PLL, 48, 1, 2}, 99 [SPD800] = {MAIN_PLL, 64, 1, 2}, 100 [SPD900] = {MAIN_PLL, 72, 1, 2}, 101 [SPD1000] = {MAIN_PLL, 80, 1, 2}, 102 }, 103 [SYSCLK_26MHz] = { 104 [SPD400] = {MAIN_PLL, 400, 13, 2}, 105 [SPD600] = {MAIN_PLL, 230, 5, 2}, 106 [SPD800] = {MAIN_PLL, 123, 2, 2}, 107 [SPD900] = {MAIN_PLL, 69, 1, 2}, 108 [SPD1000] = {MAIN_PLL, 384, 5, 2}, 109 }, 110 }; 111 112 static struct pll_init_data tetris_pll_config[MAX_SYSCLK][NUM_SPDS] = { 113 [SYSCLK_19MHz] = { 114 [SPD200] = {TETRIS_PLL, 625, 6, 10}, 115 [SPD400] = {TETRIS_PLL, 125, 1, 6}, 116 [SPD600] = {TETRIS_PLL, 125, 1, 4}, 117 [SPD800] = {TETRIS_PLL, 333, 2, 4}, 118 [SPD900] = {TETRIS_PLL, 187, 2, 2}, 119 [SPD1000] = {TETRIS_PLL, 104, 1, 2}, 120 }, 121 [SYSCLK_24MHz] = { 122 [SPD200] = {TETRIS_PLL, 250, 3, 10}, 123 [SPD400] = {TETRIS_PLL, 100, 1, 6}, 124 [SPD600] = {TETRIS_PLL, 100, 1, 4}, 125 [SPD800] = {TETRIS_PLL, 400, 3, 4}, 126 [SPD900] = {TETRIS_PLL, 75, 1, 2}, 127 [SPD1000] = {TETRIS_PLL, 250, 3, 2}, 128 }, 129 [SYSCLK_25MHz] = { 130 [SPD200] = {TETRIS_PLL, 80, 1, 10}, 131 [SPD400] = {TETRIS_PLL, 96, 1, 6}, 132 [SPD600] = {TETRIS_PLL, 96, 1, 4}, 133 [SPD800] = {TETRIS_PLL, 128, 1, 4}, 134 [SPD900] = {TETRIS_PLL, 72, 1, 2}, 135 [SPD1000] = {TETRIS_PLL, 80, 1, 2}, 136 }, 137 [SYSCLK_26MHz] = { 138 [SPD200] = {TETRIS_PLL, 307, 4, 10}, 139 [SPD400] = {TETRIS_PLL, 369, 4, 6}, 140 [SPD600] = {TETRIS_PLL, 369, 4, 4}, 141 [SPD800] = {TETRIS_PLL, 123, 1, 4}, 142 [SPD900] = {TETRIS_PLL, 69, 1, 2}, 143 [SPD1000] = {TETRIS_PLL, 384, 5, 2}, 144 }, 145 }; 146 147 static struct pll_init_data uart_pll_config[MAX_SYSCLK] = { 148 [SYSCLK_19MHz] = {UART_PLL, 160, 1, 8}, 149 [SYSCLK_24MHz] = {UART_PLL, 128, 1, 8}, 150 [SYSCLK_25MHz] = {UART_PLL, 768, 5, 10}, 151 [SYSCLK_26MHz] = {UART_PLL, 384, 13, 2}, 152 }; 153 154 static struct pll_init_data nss_pll_config[MAX_SYSCLK] = { 155 [SYSCLK_19MHz] = {NSS_PLL, 625, 6, 2}, 156 [SYSCLK_24MHz] = {NSS_PLL, 250, 3, 2}, 157 [SYSCLK_25MHz] = {NSS_PLL, 80, 1, 2}, 158 [SYSCLK_26MHz] = {NSS_PLL, 1000, 13, 2}, 159 }; 160 161 static struct pll_init_data ddr3_pll_config[MAX_SYSCLK] = { 162 [SYSCLK_19MHz] = {DDR3A_PLL, 167, 1, 16}, 163 [SYSCLK_24MHz] = {DDR3A_PLL, 133, 1, 16}, 164 [SYSCLK_25MHz] = {DDR3A_PLL, 128, 1, 16}, 165 [SYSCLK_26MHz] = {DDR3A_PLL, 123, 1, 16}, 166 }; 167 168 struct pll_init_data *get_pll_init_data(int pll) 169 { 170 int speed; 171 struct pll_init_data *data = NULL; 172 u8 sysclk_index = get_sysclk_index(); 173 174 switch (pll) { 175 case MAIN_PLL: 176 speed = get_max_dev_speed(dev_speeds); 177 data = &main_pll_config[sysclk_index][speed]; 178 break; 179 case TETRIS_PLL: 180 speed = get_max_arm_speed(arm_speeds); 181 data = &tetris_pll_config[sysclk_index][speed]; 182 break; 183 case NSS_PLL: 184 data = &nss_pll_config[sysclk_index]; 185 break; 186 case UART_PLL: 187 data = &uart_pll_config[sysclk_index]; 188 break; 189 case DDR3_PLL: 190 data = &ddr3_pll_config[sysclk_index]; 191 break; 192 default: 193 data = NULL; 194 } 195 196 return data; 197 } 198 199 s16 divn_val[16] = { 200 -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 201 }; 202 203 #if defined(CONFIG_MMC) 204 int board_mmc_init(bd_t *bis) 205 { 206 if (psc_enable_module(KS2_LPSC_MMC)) { 207 printf("%s module enabled failed\n", __func__); 208 return -1; 209 } 210 211 if (board_is_k2g_gp()) 212 omap_mmc_init(0, 0, 0, -1, -1); 213 214 omap_mmc_init(1, 0, 0, -1, -1); 215 return 0; 216 } 217 #endif 218 219 #if defined(CONFIG_FIT_EMBED) 220 int board_fit_config_name_match(const char *name) 221 { 222 bool eeprom_read = board_ti_was_eeprom_read(); 223 224 if (!strcmp(name, "keystone-k2g-generic") && !eeprom_read) 225 return 0; 226 else if (!strcmp(name, "keystone-k2g-evm") && board_ti_is("66AK2GGP")) 227 return 0; 228 else if (!strcmp(name, "keystone-k2g-ice") && board_ti_is("66AK2GIC")) 229 return 0; 230 else 231 return -1; 232 } 233 #endif 234 235 #if defined(CONFIG_DTB_RESELECT) 236 static int k2g_alt_board_detect(void) 237 { 238 int rc; 239 240 rc = i2c_set_bus_num(1); 241 if (rc) 242 return rc; 243 244 rc = i2c_probe(K2G_GP_AUDIO_CODEC_ADDRESS); 245 if (rc) 246 return rc; 247 248 ti_i2c_eeprom_am_set("66AK2GGP", "1.0X"); 249 250 return 0; 251 } 252 253 static void k2g_reset_mux_config(void) 254 { 255 /* Unlock the reset mux register */ 256 clrbits_le32(KS2_RSTMUX8, RSTMUX_LOCK8_MASK); 257 258 /* Configure BOOTCFG_RSTMUX8 for WDT event to cause a device reset */ 259 clrsetbits_le32(KS2_RSTMUX8, RSTMUX_OMODE8_MASK, 260 RSTMUX_OMODE8_DEV_RESET << RSTMUX_OMODE8_SHIFT); 261 262 /* lock the reset mux register to prevent any spurious writes. */ 263 setbits_le32(KS2_RSTMUX8, RSTMUX_LOCK8_MASK); 264 } 265 266 int embedded_dtb_select(void) 267 { 268 int rc; 269 rc = ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS, 270 CONFIG_EEPROM_CHIP_ADDRESS); 271 if (rc) { 272 rc = k2g_alt_board_detect(); 273 if (rc) { 274 printf("Unable to do board detection\n"); 275 return -1; 276 } 277 } 278 279 fdtdec_setup(); 280 281 k2g_mux_config(); 282 283 k2g_reset_mux_config(); 284 285 if (board_is_k2g_gp()) { 286 /* deassert FLASH_HOLD */ 287 clrbits_le32(K2G_GPIO1_BANK2_BASE + K2G_GPIO_DIR_OFFSET, 288 BIT(9)); 289 setbits_le32(K2G_GPIO1_BANK2_BASE + K2G_GPIO_SETDATA_OFFSET, 290 BIT(9)); 291 } 292 293 return 0; 294 } 295 #endif 296 297 #ifdef CONFIG_BOARD_LATE_INIT 298 int board_late_init(void) 299 { 300 #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_TI_I2C_BOARD_DETECT) 301 int rc; 302 303 rc = ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS, 304 CONFIG_EEPROM_CHIP_ADDRESS); 305 if (rc) 306 printf("ti_i2c_eeprom_init failed %d\n", rc); 307 308 board_ti_set_ethaddr(1); 309 #endif 310 311 #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG 312 if (board_is_k2g_gp()) 313 setenv("board_name", "66AK2GGP\0"); 314 else if (board_is_k2g_ice()) 315 setenv("board_name", "66AK2GIC\0"); 316 #endif 317 return 0; 318 } 319 #endif 320 321 #ifdef CONFIG_BOARD_EARLY_INIT_F 322 int board_early_init_f(void) 323 { 324 init_plls(); 325 326 k2g_mux_config(); 327 328 return 0; 329 } 330 #endif 331 332 #ifdef CONFIG_SPL_BUILD 333 void spl_init_keystone_plls(void) 334 { 335 init_plls(); 336 } 337 #endif 338 339 #ifdef CONFIG_DRIVER_TI_KEYSTONE_NET 340 struct eth_priv_t eth_priv_cfg[] = { 341 { 342 .int_name = "K2G_EMAC", 343 .rx_flow = 0, 344 .phy_addr = 0, 345 .slave_port = 1, 346 .sgmii_link_type = SGMII_LINK_MAC_PHY, 347 .phy_if = PHY_INTERFACE_MODE_RGMII, 348 }, 349 }; 350 351 int get_num_eth_ports(void) 352 { 353 return sizeof(eth_priv_cfg) / sizeof(struct eth_priv_t); 354 } 355 #endif 356