1 /* 2 * Library to support early TI EVM EEPROM handling 3 * 4 * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __BOARD_DETECT_H 10 #define __BOARD_DETECT_H 11 12 /* TI EEPROM MAGIC Header identifier */ 13 #define TI_EEPROM_HEADER_MAGIC 0xEE3355AA 14 #define TI_DEAD_EEPROM_MAGIC 0xADEAD12C 15 16 #define TI_EEPROM_HDR_NAME_LEN 8 17 #define TI_EEPROM_HDR_REV_LEN 4 18 #define TI_EEPROM_HDR_SERIAL_LEN 12 19 #define TI_EEPROM_HDR_CONFIG_LEN 32 20 #define TI_EEPROM_HDR_NO_OF_MAC_ADDR 3 21 #define TI_EEPROM_HDR_ETH_ALEN 6 22 23 /** 24 * struct ti_am_eeprom - This structure holds data read in from the 25 * AM335x, AM437x, AM57xx TI EVM EEPROMs. 26 * @header: This holds the magic number 27 * @name: The name of the board 28 * @version: Board revision 29 * @serial: Board serial number 30 * @config: Reserved 31 * @mac_addr: Any MAC addresses written in the EEPROM 32 * 33 * The data is this structure is read from the EEPROM on the board. 34 * It is used for board detection which is based on name. It is used 35 * to configure specific TI boards. This allows booting of multiple 36 * TI boards with a single MLO and u-boot. 37 */ 38 struct ti_am_eeprom { 39 unsigned int header; 40 char name[TI_EEPROM_HDR_NAME_LEN]; 41 char version[TI_EEPROM_HDR_REV_LEN]; 42 char serial[TI_EEPROM_HDR_SERIAL_LEN]; 43 char config[TI_EEPROM_HDR_CONFIG_LEN]; 44 char mac_addr[TI_EEPROM_HDR_NO_OF_MAC_ADDR][TI_EEPROM_HDR_ETH_ALEN]; 45 } __attribute__ ((__packed__)); 46 47 /* DRA7 EEPROM MAGIC Header identifier */ 48 #define DRA7_EEPROM_HEADER_MAGIC 0xAA5533EE 49 #define DRA7_EEPROM_HDR_NAME_LEN 16 50 #define DRA7_EEPROM_HDR_CONFIG_LEN 4 51 52 /** 53 * struct dra7_eeprom - This structure holds data read in from the DRA7 EVM 54 * EEPROMs. 55 * @header: This holds the magic number 56 * @name: The name of the board 57 * @version_major: Board major version 58 * @version_minor: Board minor version 59 * @config: Board specific config options 60 * @emif1_size: Size of DDR attached to EMIF1 61 * @emif2_size: Size of DDR attached to EMIF2 62 * 63 * The data is this structure is read from the EEPROM on the board. 64 * It is used for board detection which is based on name. It is used 65 * to configure specific DRA7 boards. This allows booting of multiple 66 * DRA7 boards with a single MLO and u-boot. 67 */ 68 struct dra7_eeprom { 69 u32 header; 70 char name[DRA7_EEPROM_HDR_NAME_LEN]; 71 u16 version_major; 72 u16 version_minor; 73 char config[DRA7_EEPROM_HDR_CONFIG_LEN]; 74 u32 emif1_size; 75 u32 emif2_size; 76 } __attribute__ ((__packed__)); 77 78 /** 79 * struct ti_common_eeprom - Null terminated, usable EEPROM contents. 80 * header: Magic number 81 * @name: NULL terminated name 82 * @version: NULL terminated version 83 * @serial: NULL terminated serial number 84 * @config: NULL terminated Board specific config options 85 * @mac_addr: MAC addresses 86 * @emif1_size: Size of the ddr available on emif1 87 * @emif2_size: Size of the ddr available on emif2 88 */ 89 struct ti_common_eeprom { 90 u32 header; 91 char name[TI_EEPROM_HDR_NAME_LEN + 1]; 92 char version[TI_EEPROM_HDR_REV_LEN + 1]; 93 char serial[TI_EEPROM_HDR_SERIAL_LEN + 1]; 94 char config[TI_EEPROM_HDR_CONFIG_LEN + 1]; 95 char mac_addr[TI_EEPROM_HDR_NO_OF_MAC_ADDR][TI_EEPROM_HDR_ETH_ALEN]; 96 u64 emif1_size; 97 u64 emif2_size; 98 }; 99 100 #define TI_EEPROM_DATA ((struct ti_common_eeprom *)\ 101 TI_SRAM_SCRATCH_BOARD_EEPROM_START) 102 103 /** 104 * ti_i2c_eeprom_am_get() - Consolidated eeprom data collection for AM* TI EVMs 105 * @bus_addr: I2C bus address 106 * @dev_addr: I2C slave address 107 * 108 * ep in SRAM is populated by the this AM generic function that consolidates 109 * the basic initialization logic common across all AM* platforms. 110 */ 111 int ti_i2c_eeprom_am_get(int bus_addr, int dev_addr); 112 113 /** 114 * ti_i2c_eeprom_dra7_get() - Consolidated eeprom data for DRA7 TI EVMs 115 * @bus_addr: I2C bus address 116 * @dev_addr: I2C slave address 117 */ 118 int ti_i2c_eeprom_dra7_get(int bus_addr, int dev_addr); 119 120 /** 121 * board_ti_is() - Board detection logic for TI EVMs 122 * @name_tag: Tag used in eeprom for the board 123 * 124 * Return: false if board information does not match OR eeprom wasn't read. 125 * true otherwise 126 */ 127 bool board_ti_is(char *name_tag); 128 129 /** 130 * board_ti_rev_is() - Compare board revision for TI EVMs 131 * @rev_tag: Revision tag to check in eeprom 132 * @cmp_len: How many chars to compare? 133 * 134 * NOTE: revision information is often messed up (hence the str len match) :( 135 * 136 * Return: false if board information does not match OR eeprom wasn't read. 137 * true otherwise 138 */ 139 bool board_ti_rev_is(char *rev_tag, int cmp_len); 140 141 /** 142 * board_ti_get_rev() - Get board revision for TI EVMs 143 * 144 * Return: Empty string if eeprom wasn't read. 145 * Board revision otherwise 146 */ 147 char *board_ti_get_rev(void); 148 149 /** 150 * board_ti_get_config() - Get board config for TI EVMs 151 * 152 * Return: Empty string if eeprom wasn't read. 153 * Board config otherwise 154 */ 155 char *board_ti_get_config(void); 156 157 /** 158 * board_ti_get_name() - Get board name for TI EVMs 159 * 160 * Return: Empty string if eeprom wasn't read. 161 * Board name otherwise 162 */ 163 char *board_ti_get_name(void); 164 165 /** 166 * board_ti_get_eth_mac_addr() - Get Ethernet MAC address from EEPROM MAC list 167 * @index: 0 based index within the list of MAC addresses 168 * @mac_addr: MAC address contained at the index is returned here 169 * 170 * Does not sanity check the mac_addr. Whatever is stored in EEPROM is returned. 171 */ 172 void board_ti_get_eth_mac_addr(int index, u8 mac_addr[TI_EEPROM_HDR_ETH_ALEN]); 173 174 /** 175 * board_ti_get_emif1_size() - Get size of the DDR on emif1 for TI EVMs 176 * 177 * Return: NULL if eeprom wasn't read or emif1_size is not available. 178 */ 179 u64 board_ti_get_emif1_size(void); 180 181 /** 182 * board_ti_get_emif2_size() - Get size of the DDR on emif2 for TI EVMs 183 * 184 * Return: NULL if eeprom wasn't read or emif2_size is not available. 185 */ 186 u64 board_ti_get_emif2_size(void); 187 188 /** 189 * set_board_info_env() - Setup commonly used board information environment vars 190 * @name: Name of the board 191 * 192 * If name is NULL, default_name is used. 193 */ 194 void set_board_info_env(char *name); 195 196 /** 197 * board_ti_set_ethaddr- Sets the ethaddr environment from EEPROM 198 * @index: The first eth<index>addr environment variable to set 199 * 200 * EEPROM should be already read before calling this function. 201 * The EEPROM contains 2 MAC addresses which define the MAC address 202 * range (i.e. first and last MAC address). 203 * This function sets the ethaddr environment variable for all 204 * the available MAC addresses starting from eth<index>addr. 205 */ 206 void board_ti_set_ethaddr(int index); 207 208 #endif /* __BOARD_DETECT_H */ 209