1 /* 2 * Library to support early TI EVM EEPROM handling 3 * 4 * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ 5 * Lokesh Vutla 6 * Steve Kipisz 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 */ 10 11 #include <common.h> 12 #include <asm/omap_common.h> 13 #include <i2c.h> 14 15 #include "board_detect.h" 16 17 /** 18 * ti_i2c_eeprom_init - Initialize an i2c bus and probe for a device 19 * @i2c_bus: i2c bus number to initialize 20 * @dev_addr: Device address to probe for 21 * 22 * Return: 0 on success or corresponding error on failure. 23 */ 24 static int __maybe_unused ti_i2c_eeprom_init(int i2c_bus, int dev_addr) 25 { 26 int rc; 27 28 if (i2c_bus >= 0) { 29 rc = i2c_set_bus_num(i2c_bus); 30 if (rc) 31 return rc; 32 } 33 34 return i2c_probe(dev_addr); 35 } 36 37 /** 38 * ti_i2c_eeprom_read - Read data from an EEPROM 39 * @dev_addr: The device address of the EEPROM 40 * @offset: Offset to start reading in the EEPROM 41 * @ep: Pointer to a buffer to read into 42 * @epsize: Size of buffer 43 * 44 * Return: 0 on success or corresponding result of i2c_read 45 */ 46 static int __maybe_unused ti_i2c_eeprom_read(int dev_addr, int offset, 47 uchar *ep, int epsize) 48 { 49 return i2c_read(dev_addr, offset, 2, ep, epsize); 50 } 51 52 /** 53 * ti_eeprom_string_cleanup() - Handle eeprom programming errors 54 * @s: eeprom string (should be NULL terminated) 55 * 56 * Some Board manufacturers do not add a NULL termination at the 57 * end of string, instead some binary information is kludged in, hence 58 * convert the string to just printable characters of ASCII chart. 59 */ 60 static void __maybe_unused ti_eeprom_string_cleanup(char *s) 61 { 62 int i, l; 63 64 l = strlen(s); 65 for (i = 0; i < l; i++, s++) 66 if (*s < ' ' || *s > '~') { 67 *s = 0; 68 break; 69 } 70 } 71 72 __weak void gpi2c_init(void) 73 { 74 } 75 76 static int __maybe_unused ti_i2c_eeprom_get(int bus_addr, int dev_addr, 77 u32 header, u32 size, uint8_t *ep) 78 { 79 u32 byte, hdr_read; 80 int rc; 81 82 gpi2c_init(); 83 rc = ti_i2c_eeprom_init(bus_addr, dev_addr); 84 if (rc) 85 return rc; 86 87 /* 88 * Read the header first then only read the other contents. 89 */ 90 byte = 2; 91 rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read, 4); 92 if (rc) 93 return rc; 94 95 /* Corrupted data??? */ 96 if (hdr_read != header) { 97 rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read, 4); 98 /* 99 * read the eeprom header using i2c again, but use only a 100 * 1 byte address (some legacy boards need this..) 101 */ 102 byte = 1; 103 if (rc) 104 rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read, 105 4); 106 if (rc) 107 return rc; 108 } 109 if (hdr_read != header) 110 return -1; 111 112 rc = i2c_read(dev_addr, 0x0, byte, ep, size); 113 if (rc) 114 return rc; 115 116 return 0; 117 } 118 119 int __maybe_unused ti_i2c_eeprom_am_get(int bus_addr, int dev_addr) 120 { 121 int rc; 122 struct ti_am_eeprom am_ep; 123 struct ti_common_eeprom *ep; 124 125 ep = TI_EEPROM_DATA; 126 #ifndef CONFIG_SPL_BUILD 127 if (ep->header == TI_EEPROM_HEADER_MAGIC) 128 return 0; /* EEPROM has already been read */ 129 #endif 130 131 /* Initialize with a known bad marker for i2c fails.. */ 132 ep->header = TI_DEAD_EEPROM_MAGIC; 133 ep->name[0] = 0x0; 134 ep->version[0] = 0x0; 135 ep->serial[0] = 0x0; 136 ep->config[0] = 0x0; 137 138 rc = ti_i2c_eeprom_get(bus_addr, dev_addr, TI_EEPROM_HEADER_MAGIC, 139 sizeof(am_ep), (uint8_t *)&am_ep); 140 if (rc) 141 return rc; 142 143 ep->header = am_ep.header; 144 strlcpy(ep->name, am_ep.name, TI_EEPROM_HDR_NAME_LEN + 1); 145 ti_eeprom_string_cleanup(ep->name); 146 147 /* BeagleBone Green '1' eeprom, board_rev: 0x1a 0x00 0x00 0x00 */ 148 if (am_ep.version[0] == 0x1a && am_ep.version[1] == 0x00 && 149 am_ep.version[2] == 0x00 && am_ep.version[3] == 0x00) 150 strlcpy(ep->version, "BBG1", TI_EEPROM_HDR_REV_LEN + 1); 151 else 152 strlcpy(ep->version, am_ep.version, TI_EEPROM_HDR_REV_LEN + 1); 153 ti_eeprom_string_cleanup(ep->version); 154 strlcpy(ep->serial, am_ep.serial, TI_EEPROM_HDR_SERIAL_LEN + 1); 155 ti_eeprom_string_cleanup(ep->serial); 156 strlcpy(ep->config, am_ep.config, TI_EEPROM_HDR_CONFIG_LEN + 1); 157 ti_eeprom_string_cleanup(ep->config); 158 159 memcpy(ep->mac_addr, am_ep.mac_addr, 160 TI_EEPROM_HDR_NO_OF_MAC_ADDR * TI_EEPROM_HDR_ETH_ALEN); 161 162 return 0; 163 } 164 165 int __maybe_unused ti_i2c_eeprom_dra7_get(int bus_addr, int dev_addr) 166 { 167 int rc, offset = 0; 168 struct dra7_eeprom dra7_ep; 169 struct ti_common_eeprom *ep; 170 171 ep = TI_EEPROM_DATA; 172 #ifndef CONFIG_SPL_BUILD 173 if (ep->header == DRA7_EEPROM_HEADER_MAGIC) 174 return 0; /* EEPROM has already been read */ 175 #endif 176 177 /* Initialize with a known bad marker for i2c fails.. */ 178 ep->header = TI_DEAD_EEPROM_MAGIC; 179 ep->name[0] = 0x0; 180 ep->version[0] = 0x0; 181 ep->serial[0] = 0x0; 182 ep->config[0] = 0x0; 183 ep->emif1_size = 0; 184 ep->emif2_size = 0; 185 186 rc = ti_i2c_eeprom_get(bus_addr, dev_addr, DRA7_EEPROM_HEADER_MAGIC, 187 sizeof(dra7_ep), (uint8_t *)&dra7_ep); 188 if (rc) 189 return rc; 190 191 ep->header = dra7_ep.header; 192 strlcpy(ep->name, dra7_ep.name, TI_EEPROM_HDR_NAME_LEN + 1); 193 ti_eeprom_string_cleanup(ep->name); 194 195 offset = dra7_ep.version_major - 1; 196 197 /* Rev F is skipped */ 198 if (offset >= 5) 199 offset = offset + 1; 200 snprintf(ep->version, TI_EEPROM_HDR_REV_LEN + 1, "%c.%d", 201 'A' + offset, dra7_ep.version_minor); 202 ti_eeprom_string_cleanup(ep->version); 203 ep->emif1_size = (u64)dra7_ep.emif1_size; 204 ep->emif2_size = (u64)dra7_ep.emif2_size; 205 strlcpy(ep->config, dra7_ep.config, TI_EEPROM_HDR_CONFIG_LEN + 1); 206 ti_eeprom_string_cleanup(ep->config); 207 208 return 0; 209 } 210 211 bool __maybe_unused board_ti_is(char *name_tag) 212 { 213 struct ti_common_eeprom *ep = TI_EEPROM_DATA; 214 215 if (ep->header == TI_DEAD_EEPROM_MAGIC) 216 return false; 217 return !strncmp(ep->name, name_tag, TI_EEPROM_HDR_NAME_LEN); 218 } 219 220 bool __maybe_unused board_ti_rev_is(char *rev_tag, int cmp_len) 221 { 222 struct ti_common_eeprom *ep = TI_EEPROM_DATA; 223 int l; 224 225 if (ep->header == TI_DEAD_EEPROM_MAGIC) 226 return false; 227 228 l = cmp_len > TI_EEPROM_HDR_REV_LEN ? TI_EEPROM_HDR_REV_LEN : cmp_len; 229 return !strncmp(ep->version, rev_tag, l); 230 } 231 232 char * __maybe_unused board_ti_get_rev(void) 233 { 234 struct ti_common_eeprom *ep = TI_EEPROM_DATA; 235 236 /* if ep->header == TI_DEAD_EEPROM_MAGIC, this is empty already */ 237 return ep->version; 238 } 239 240 char * __maybe_unused board_ti_get_config(void) 241 { 242 struct ti_common_eeprom *ep = TI_EEPROM_DATA; 243 244 /* if ep->header == TI_DEAD_EEPROM_MAGIC, this is empty already */ 245 return ep->config; 246 } 247 248 char * __maybe_unused board_ti_get_name(void) 249 { 250 struct ti_common_eeprom *ep = TI_EEPROM_DATA; 251 252 /* if ep->header == TI_DEAD_EEPROM_MAGIC, this is empty already */ 253 return ep->name; 254 } 255 256 void __maybe_unused 257 board_ti_get_eth_mac_addr(int index, 258 u8 mac_addr[TI_EEPROM_HDR_ETH_ALEN]) 259 { 260 struct ti_common_eeprom *ep = TI_EEPROM_DATA; 261 262 if (ep->header == TI_DEAD_EEPROM_MAGIC) 263 goto fail; 264 265 if (index < 0 || index >= TI_EEPROM_HDR_NO_OF_MAC_ADDR) 266 goto fail; 267 268 memcpy(mac_addr, ep->mac_addr[index], TI_EEPROM_HDR_ETH_ALEN); 269 return; 270 271 fail: 272 memset(mac_addr, 0, TI_EEPROM_HDR_ETH_ALEN); 273 } 274 275 u64 __maybe_unused board_ti_get_emif1_size(void) 276 { 277 struct ti_common_eeprom *ep = TI_EEPROM_DATA; 278 279 if (ep->header != DRA7_EEPROM_HEADER_MAGIC) 280 return 0; 281 282 return ep->emif1_size; 283 } 284 285 u64 __maybe_unused board_ti_get_emif2_size(void) 286 { 287 struct ti_common_eeprom *ep = TI_EEPROM_DATA; 288 289 if (ep->header != DRA7_EEPROM_HEADER_MAGIC) 290 return 0; 291 292 return ep->emif2_size; 293 } 294 295 void __maybe_unused set_board_info_env(char *name) 296 { 297 char *unknown = "unknown"; 298 struct ti_common_eeprom *ep = TI_EEPROM_DATA; 299 300 if (name) 301 setenv("board_name", name); 302 else if (ep->name) 303 setenv("board_name", ep->name); 304 else 305 setenv("board_name", unknown); 306 307 if (ep->version) 308 setenv("board_rev", ep->version); 309 else 310 setenv("board_rev", unknown); 311 312 if (ep->serial) 313 setenv("board_serial", ep->serial); 314 else 315 setenv("board_serial", unknown); 316 } 317