1 /* 2 * Library to support early TI EVM EEPROM handling 3 * 4 * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ 5 * Lokesh Vutla 6 * Steve Kipisz 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 */ 10 11 #include <common.h> 12 #include <asm/omap_common.h> 13 #include <dm/uclass.h> 14 #include <i2c.h> 15 16 #include "board_detect.h" 17 18 #if defined(CONFIG_DM_I2C_COMPAT) 19 /** 20 * ti_i2c_set_alen - Set chip's i2c address length 21 * @bus_addr - I2C bus number 22 * @dev_addr - I2C eeprom id 23 * @alen - I2C address length in bytes 24 * 25 * DM_I2C by default sets the address length to be used to 1. This 26 * function allows this address length to be changed to match the 27 * eeprom used for board detection. 28 */ 29 int __maybe_unused ti_i2c_set_alen(int bus_addr, int dev_addr, int alen) 30 { 31 struct udevice *dev; 32 struct udevice *bus; 33 int rc; 34 35 rc = uclass_get_device_by_seq(UCLASS_I2C, bus_addr, &bus); 36 if (rc) 37 return rc; 38 rc = i2c_get_chip(bus, dev_addr, 1, &dev); 39 if (rc) 40 return rc; 41 rc = i2c_set_chip_offset_len(dev, alen); 42 if (rc) 43 return rc; 44 45 return 0; 46 } 47 #else 48 int __maybe_unused ti_i2c_set_alen(int bus_addr, int dev_addr, int alen) 49 { 50 return 0; 51 } 52 #endif 53 54 /** 55 * ti_i2c_eeprom_init - Initialize an i2c bus and probe for a device 56 * @i2c_bus: i2c bus number to initialize 57 * @dev_addr: Device address to probe for 58 * 59 * Return: 0 on success or corresponding error on failure. 60 */ 61 static int __maybe_unused ti_i2c_eeprom_init(int i2c_bus, int dev_addr) 62 { 63 int rc; 64 65 if (i2c_bus >= 0) { 66 rc = i2c_set_bus_num(i2c_bus); 67 if (rc) 68 return rc; 69 } 70 71 return i2c_probe(dev_addr); 72 } 73 74 /** 75 * ti_i2c_eeprom_read - Read data from an EEPROM 76 * @dev_addr: The device address of the EEPROM 77 * @offset: Offset to start reading in the EEPROM 78 * @ep: Pointer to a buffer to read into 79 * @epsize: Size of buffer 80 * 81 * Return: 0 on success or corresponding result of i2c_read 82 */ 83 static int __maybe_unused ti_i2c_eeprom_read(int dev_addr, int offset, 84 uchar *ep, int epsize) 85 { 86 int bus_num, rc, alen; 87 88 bus_num = i2c_get_bus_num(); 89 90 alen = 2; 91 92 rc = ti_i2c_set_alen(bus_num, dev_addr, alen); 93 if (rc) 94 return rc; 95 96 return i2c_read(dev_addr, offset, alen, ep, epsize); 97 } 98 99 /** 100 * ti_eeprom_string_cleanup() - Handle eeprom programming errors 101 * @s: eeprom string (should be NULL terminated) 102 * 103 * Some Board manufacturers do not add a NULL termination at the 104 * end of string, instead some binary information is kludged in, hence 105 * convert the string to just printable characters of ASCII chart. 106 */ 107 static void __maybe_unused ti_eeprom_string_cleanup(char *s) 108 { 109 int i, l; 110 111 l = strlen(s); 112 for (i = 0; i < l; i++, s++) 113 if (*s < ' ' || *s > '~') { 114 *s = 0; 115 break; 116 } 117 } 118 119 __weak void gpi2c_init(void) 120 { 121 } 122 123 static int __maybe_unused ti_i2c_eeprom_get(int bus_addr, int dev_addr, 124 u32 header, u32 size, uint8_t *ep) 125 { 126 u32 byte, hdr_read; 127 int rc; 128 129 gpi2c_init(); 130 rc = ti_i2c_eeprom_init(bus_addr, dev_addr); 131 if (rc) 132 return rc; 133 134 /* 135 * Read the header first then only read the other contents. 136 */ 137 byte = 2; 138 139 rc = ti_i2c_set_alen(bus_addr, dev_addr, byte); 140 if (rc) 141 return rc; 142 143 rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read, 4); 144 if (rc) 145 return rc; 146 147 /* Corrupted data??? */ 148 if (hdr_read != header) { 149 rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read, 4); 150 /* 151 * read the eeprom header using i2c again, but use only a 152 * 1 byte address (some legacy boards need this..) 153 */ 154 byte = 1; 155 if (rc) { 156 rc = ti_i2c_set_alen(bus_addr, dev_addr, byte); 157 if (rc) 158 return rc; 159 160 rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read, 161 4); 162 } 163 if (rc) 164 return rc; 165 } 166 if (hdr_read != header) 167 return -1; 168 169 rc = i2c_read(dev_addr, 0x0, byte, ep, size); 170 if (rc) 171 return rc; 172 173 return 0; 174 } 175 176 int __maybe_unused ti_i2c_eeprom_am_set(const char *name, const char *rev) 177 { 178 struct ti_common_eeprom *ep; 179 180 if (!name || !rev) 181 return -1; 182 183 ep = TI_EEPROM_DATA; 184 if (ep->header == TI_EEPROM_HEADER_MAGIC) 185 goto already_set; 186 187 /* Set to 0 all fields */ 188 memset(ep, 0, sizeof(*ep)); 189 strncpy(ep->name, name, TI_EEPROM_HDR_NAME_LEN); 190 strncpy(ep->version, rev, TI_EEPROM_HDR_REV_LEN); 191 /* Some dummy serial number to identify the platform */ 192 strncpy(ep->serial, "0000", TI_EEPROM_HDR_SERIAL_LEN); 193 /* Mark it with a valid header */ 194 ep->header = TI_EEPROM_HEADER_MAGIC; 195 196 already_set: 197 return 0; 198 } 199 200 int __maybe_unused ti_i2c_eeprom_am_get(int bus_addr, int dev_addr) 201 { 202 int rc; 203 struct ti_am_eeprom am_ep; 204 struct ti_common_eeprom *ep; 205 206 ep = TI_EEPROM_DATA; 207 #ifndef CONFIG_SPL_BUILD 208 if (ep->header == TI_EEPROM_HEADER_MAGIC) 209 return 0; /* EEPROM has already been read */ 210 #endif 211 212 /* Initialize with a known bad marker for i2c fails.. */ 213 ep->header = TI_DEAD_EEPROM_MAGIC; 214 ep->name[0] = 0x0; 215 ep->version[0] = 0x0; 216 ep->serial[0] = 0x0; 217 ep->config[0] = 0x0; 218 219 rc = ti_i2c_eeprom_get(bus_addr, dev_addr, TI_EEPROM_HEADER_MAGIC, 220 sizeof(am_ep), (uint8_t *)&am_ep); 221 if (rc) 222 return rc; 223 224 ep->header = am_ep.header; 225 strlcpy(ep->name, am_ep.name, TI_EEPROM_HDR_NAME_LEN + 1); 226 ti_eeprom_string_cleanup(ep->name); 227 228 /* BeagleBone Green '1' eeprom, board_rev: 0x1a 0x00 0x00 0x00 */ 229 if (am_ep.version[0] == 0x1a && am_ep.version[1] == 0x00 && 230 am_ep.version[2] == 0x00 && am_ep.version[3] == 0x00) 231 strlcpy(ep->version, "BBG1", TI_EEPROM_HDR_REV_LEN + 1); 232 else 233 strlcpy(ep->version, am_ep.version, TI_EEPROM_HDR_REV_LEN + 1); 234 ti_eeprom_string_cleanup(ep->version); 235 strlcpy(ep->serial, am_ep.serial, TI_EEPROM_HDR_SERIAL_LEN + 1); 236 ti_eeprom_string_cleanup(ep->serial); 237 strlcpy(ep->config, am_ep.config, TI_EEPROM_HDR_CONFIG_LEN + 1); 238 ti_eeprom_string_cleanup(ep->config); 239 240 memcpy(ep->mac_addr, am_ep.mac_addr, 241 TI_EEPROM_HDR_NO_OF_MAC_ADDR * TI_EEPROM_HDR_ETH_ALEN); 242 243 return 0; 244 } 245 246 int __maybe_unused ti_i2c_eeprom_dra7_get(int bus_addr, int dev_addr) 247 { 248 int rc, offset = 0; 249 struct dra7_eeprom dra7_ep; 250 struct ti_common_eeprom *ep; 251 252 ep = TI_EEPROM_DATA; 253 #ifndef CONFIG_SPL_BUILD 254 if (ep->header == DRA7_EEPROM_HEADER_MAGIC) 255 return 0; /* EEPROM has already been read */ 256 #endif 257 258 /* Initialize with a known bad marker for i2c fails.. */ 259 ep->header = TI_DEAD_EEPROM_MAGIC; 260 ep->name[0] = 0x0; 261 ep->version[0] = 0x0; 262 ep->serial[0] = 0x0; 263 ep->config[0] = 0x0; 264 ep->emif1_size = 0; 265 ep->emif2_size = 0; 266 267 rc = ti_i2c_eeprom_get(bus_addr, dev_addr, DRA7_EEPROM_HEADER_MAGIC, 268 sizeof(dra7_ep), (uint8_t *)&dra7_ep); 269 if (rc) 270 return rc; 271 272 ep->header = dra7_ep.header; 273 strlcpy(ep->name, dra7_ep.name, TI_EEPROM_HDR_NAME_LEN + 1); 274 ti_eeprom_string_cleanup(ep->name); 275 276 offset = dra7_ep.version_major - 1; 277 278 /* Rev F is skipped */ 279 if (offset >= 5) 280 offset = offset + 1; 281 snprintf(ep->version, TI_EEPROM_HDR_REV_LEN + 1, "%c.%d", 282 'A' + offset, dra7_ep.version_minor); 283 ti_eeprom_string_cleanup(ep->version); 284 ep->emif1_size = (u64)dra7_ep.emif1_size; 285 ep->emif2_size = (u64)dra7_ep.emif2_size; 286 strlcpy(ep->config, dra7_ep.config, TI_EEPROM_HDR_CONFIG_LEN + 1); 287 ti_eeprom_string_cleanup(ep->config); 288 289 return 0; 290 } 291 292 bool __maybe_unused board_ti_is(char *name_tag) 293 { 294 struct ti_common_eeprom *ep = TI_EEPROM_DATA; 295 296 if (ep->header == TI_DEAD_EEPROM_MAGIC) 297 return false; 298 return !strncmp(ep->name, name_tag, TI_EEPROM_HDR_NAME_LEN); 299 } 300 301 bool __maybe_unused board_ti_rev_is(char *rev_tag, int cmp_len) 302 { 303 struct ti_common_eeprom *ep = TI_EEPROM_DATA; 304 int l; 305 306 if (ep->header == TI_DEAD_EEPROM_MAGIC) 307 return false; 308 309 l = cmp_len > TI_EEPROM_HDR_REV_LEN ? TI_EEPROM_HDR_REV_LEN : cmp_len; 310 return !strncmp(ep->version, rev_tag, l); 311 } 312 313 char * __maybe_unused board_ti_get_rev(void) 314 { 315 struct ti_common_eeprom *ep = TI_EEPROM_DATA; 316 317 /* if ep->header == TI_DEAD_EEPROM_MAGIC, this is empty already */ 318 return ep->version; 319 } 320 321 char * __maybe_unused board_ti_get_config(void) 322 { 323 struct ti_common_eeprom *ep = TI_EEPROM_DATA; 324 325 /* if ep->header == TI_DEAD_EEPROM_MAGIC, this is empty already */ 326 return ep->config; 327 } 328 329 char * __maybe_unused board_ti_get_name(void) 330 { 331 struct ti_common_eeprom *ep = TI_EEPROM_DATA; 332 333 /* if ep->header == TI_DEAD_EEPROM_MAGIC, this is empty already */ 334 return ep->name; 335 } 336 337 void __maybe_unused 338 board_ti_get_eth_mac_addr(int index, 339 u8 mac_addr[TI_EEPROM_HDR_ETH_ALEN]) 340 { 341 struct ti_common_eeprom *ep = TI_EEPROM_DATA; 342 343 if (ep->header == TI_DEAD_EEPROM_MAGIC) 344 goto fail; 345 346 if (index < 0 || index >= TI_EEPROM_HDR_NO_OF_MAC_ADDR) 347 goto fail; 348 349 memcpy(mac_addr, ep->mac_addr[index], TI_EEPROM_HDR_ETH_ALEN); 350 return; 351 352 fail: 353 memset(mac_addr, 0, TI_EEPROM_HDR_ETH_ALEN); 354 } 355 356 u64 __maybe_unused board_ti_get_emif1_size(void) 357 { 358 struct ti_common_eeprom *ep = TI_EEPROM_DATA; 359 360 if (ep->header != DRA7_EEPROM_HEADER_MAGIC) 361 return 0; 362 363 return ep->emif1_size; 364 } 365 366 u64 __maybe_unused board_ti_get_emif2_size(void) 367 { 368 struct ti_common_eeprom *ep = TI_EEPROM_DATA; 369 370 if (ep->header != DRA7_EEPROM_HEADER_MAGIC) 371 return 0; 372 373 return ep->emif2_size; 374 } 375 376 void __maybe_unused set_board_info_env(char *name) 377 { 378 char *unknown = "unknown"; 379 struct ti_common_eeprom *ep = TI_EEPROM_DATA; 380 381 if (name) 382 setenv("board_name", name); 383 else if (ep->name) 384 setenv("board_name", ep->name); 385 else 386 setenv("board_name", unknown); 387 388 if (ep->version) 389 setenv("board_rev", ep->version); 390 else 391 setenv("board_rev", unknown); 392 393 if (ep->serial) 394 setenv("board_serial", ep->serial); 395 else 396 setenv("board_serial", unknown); 397 } 398 399 static u64 mac_to_u64(u8 mac[6]) 400 { 401 int i; 402 u64 addr = 0; 403 404 for (i = 0; i < 6; i++) { 405 addr <<= 8; 406 addr |= mac[i]; 407 } 408 409 return addr; 410 } 411 412 static void u64_to_mac(u64 addr, u8 mac[6]) 413 { 414 mac[5] = addr; 415 mac[4] = addr >> 8; 416 mac[3] = addr >> 16; 417 mac[2] = addr >> 24; 418 mac[1] = addr >> 32; 419 mac[0] = addr >> 40; 420 } 421 422 void board_ti_set_ethaddr(int index) 423 { 424 uint8_t mac_addr[6]; 425 int i; 426 u64 mac1, mac2; 427 u8 mac_addr1[6], mac_addr2[6]; 428 int num_macs; 429 /* 430 * Export any Ethernet MAC addresses from EEPROM. 431 * The 2 MAC addresses in EEPROM define the address range. 432 */ 433 board_ti_get_eth_mac_addr(0, mac_addr1); 434 board_ti_get_eth_mac_addr(1, mac_addr2); 435 436 if (is_valid_ethaddr(mac_addr1) && is_valid_ethaddr(mac_addr2)) { 437 mac1 = mac_to_u64(mac_addr1); 438 mac2 = mac_to_u64(mac_addr2); 439 440 /* must contain an address range */ 441 num_macs = mac2 - mac1 + 1; 442 if (num_macs <= 0) 443 return; 444 445 if (num_macs > 50) { 446 printf("%s: Too many MAC addresses: %d. Limiting to 50\n", 447 __func__, num_macs); 448 num_macs = 50; 449 } 450 451 for (i = 0; i < num_macs; i++) { 452 u64_to_mac(mac1 + i, mac_addr); 453 if (is_valid_ethaddr(mac_addr)) { 454 eth_setenv_enetaddr_by_index("eth", i + index, 455 mac_addr); 456 } 457 } 458 } 459 } 460 461 bool __maybe_unused board_ti_was_eeprom_read(void) 462 { 463 struct ti_common_eeprom *ep = TI_EEPROM_DATA; 464 465 if (ep->header == TI_EEPROM_HEADER_MAGIC) 466 return true; 467 else 468 return false; 469 } 470