xref: /openbmc/u-boot/board/ti/am43xx/mux.c (revision cf0bcd7d)
1 /*
2  * mux.c
3  *
4  * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 
9 #include <common.h>
10 #include <asm/arch/sys_proto.h>
11 #include <asm/arch/mux.h>
12 #include "../common/board_detect.h"
13 #include "board.h"
14 
15 static struct module_pin_mux rmii1_pin_mux[] = {
16 	{OFFSET(mii1_txen), MODE(1)},			/* RMII1_TXEN */
17 	{OFFSET(mii1_txd1), MODE(1)},			/* RMII1_TD1 */
18 	{OFFSET(mii1_txd0), MODE(1)},			/* RMII1_TD0 */
19 	{OFFSET(mii1_rxd1), MODE(1) | RXACTIVE},	/* RMII1_RD1 */
20 	{OFFSET(mii1_rxd0), MODE(1) | RXACTIVE},	/* RMII1_RD0 */
21 	{OFFSET(mii1_rxdv), MODE(1) | RXACTIVE},	/* RMII1_RXDV */
22 	{OFFSET(mii1_crs), MODE(1) | RXACTIVE},		/* RMII1_CRS_DV */
23 	{OFFSET(mii1_rxerr), MODE(1) | RXACTIVE},	/* RMII1_RXERR */
24 	{OFFSET(rmii1_refclk), MODE(0) | RXACTIVE},	/* RMII1_refclk */
25 	{-1},
26 };
27 
28 static struct module_pin_mux rgmii1_pin_mux[] = {
29 	{OFFSET(mii1_txen), MODE(2)},			/* RGMII1_TCTL */
30 	{OFFSET(mii1_rxdv), MODE(2) | RXACTIVE},	/* RGMII1_RCTL */
31 	{OFFSET(mii1_txd3), MODE(2)},			/* RGMII1_TD3 */
32 	{OFFSET(mii1_txd2), MODE(2)},			/* RGMII1_TD2 */
33 	{OFFSET(mii1_txd1), MODE(2)},			/* RGMII1_TD1 */
34 	{OFFSET(mii1_txd0), MODE(2)},			/* RGMII1_TD0 */
35 	{OFFSET(mii1_txclk), MODE(2)},			/* RGMII1_TCLK */
36 	{OFFSET(mii1_rxclk), MODE(2) | RXACTIVE},	/* RGMII1_RCLK */
37 	{OFFSET(mii1_rxd3), MODE(2) | RXACTIVE},	/* RGMII1_RD3 */
38 	{OFFSET(mii1_rxd2), MODE(2) | RXACTIVE},	/* RGMII1_RD2 */
39 	{OFFSET(mii1_rxd1), MODE(2) | RXACTIVE},	/* RGMII1_RD1 */
40 	{OFFSET(mii1_rxd0), MODE(2) | RXACTIVE},	/* RGMII1_RD0 */
41 	{-1},
42 };
43 
44 static struct module_pin_mux mdio_pin_mux[] = {
45 	{OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN},/* MDIO_DATA */
46 	{OFFSET(mdio_clk), MODE(0) | PULLUP_EN},	/* MDIO_CLK */
47 	{-1},
48 };
49 
50 static struct module_pin_mux uart0_pin_mux[] = {
51 	{OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE | SLEWCTRL)},
52 	{OFFSET(uart0_txd), (MODE(0) | PULLUDDIS | PULLUP_EN | SLEWCTRL)},
53 	{-1},
54 };
55 
56 static struct module_pin_mux mmc0_pin_mux[] = {
57 	{OFFSET(mmc0_clk), (MODE(0) | PULLUDDIS | RXACTIVE)},  /* MMC0_CLK */
58 	{OFFSET(mmc0_cmd), (MODE(0) | PULLUP_EN | RXACTIVE)},  /* MMC0_CMD */
59 	{OFFSET(mmc0_dat0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* MMC0_DAT0 */
60 	{OFFSET(mmc0_dat1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* MMC0_DAT1 */
61 	{OFFSET(mmc0_dat2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* MMC0_DAT2 */
62 	{OFFSET(mmc0_dat3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* MMC0_DAT3 */
63 	{-1},
64 };
65 
66 static struct module_pin_mux i2c0_pin_mux[] = {
67 	{OFFSET(i2c0_sda), (MODE(0) | PULLUP_EN | RXACTIVE | SLEWCTRL)},
68 	{OFFSET(i2c0_scl), (MODE(0) | PULLUP_EN | RXACTIVE | SLEWCTRL)},
69 	{-1},
70 };
71 
72 static struct module_pin_mux gpio5_7_pin_mux[] = {
73 	{OFFSET(spi0_cs0), (MODE(7) | PULLUP_EN)},	/* GPIO5_7 */
74 	{-1},
75 };
76 
77 #ifdef CONFIG_NAND
78 static struct module_pin_mux nand_pin_mux[] = {
79 	{OFFSET(gpmc_ad0),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD0 */
80 	{OFFSET(gpmc_ad1),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD1 */
81 	{OFFSET(gpmc_ad2),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD2 */
82 	{OFFSET(gpmc_ad3),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD3 */
83 	{OFFSET(gpmc_ad4),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD4 */
84 	{OFFSET(gpmc_ad5),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD5 */
85 	{OFFSET(gpmc_ad6),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD6 */
86 	{OFFSET(gpmc_ad7),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD7 */
87 #ifdef CONFIG_SYS_NAND_BUSWIDTH_16BIT
88 	{OFFSET(gpmc_ad8),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD8  */
89 	{OFFSET(gpmc_ad9),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD9  */
90 	{OFFSET(gpmc_ad10),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD10 */
91 	{OFFSET(gpmc_ad11),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD11 */
92 	{OFFSET(gpmc_ad12),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD12 */
93 	{OFFSET(gpmc_ad13),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD13 */
94 	{OFFSET(gpmc_ad14),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD14 */
95 	{OFFSET(gpmc_ad15),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD15 */
96 #endif
97 	{OFFSET(gpmc_wait0),	(MODE(0) | RXACTIVE | PULLUP_EN)}, /* Wait */
98 	{OFFSET(gpmc_wpn),	(MODE(7) | PULLUP_EN)},	/* Write Protect */
99 	{OFFSET(gpmc_csn0),	(MODE(0) | PULLUP_EN)},	/* Chip-Select */
100 	{OFFSET(gpmc_wen),	(MODE(0) | PULLDOWN_EN)}, /* Write Enable */
101 	{OFFSET(gpmc_oen_ren),	(MODE(0) | PULLDOWN_EN)}, /* Read Enable */
102 	{OFFSET(gpmc_advn_ale),	(MODE(0) | PULLDOWN_EN)}, /* Addr Latch Enable*/
103 	{OFFSET(gpmc_be0n_cle),	(MODE(0) | PULLDOWN_EN)}, /* Byte Enable */
104 	{-1},
105 };
106 #endif
107 
108 static __maybe_unused struct module_pin_mux qspi_pin_mux[] = {
109 	{OFFSET(gpmc_csn0), (MODE(3) | PULLUP_EN | RXACTIVE)}, /* QSPI_CS0 */
110 	{OFFSET(gpmc_csn3), (MODE(2) | PULLUP_EN | RXACTIVE)}, /* QSPI_CLK */
111 	{OFFSET(gpmc_advn_ale), (MODE(3) | PULLUP_EN | RXACTIVE)}, /* QSPI_D0 */
112 	{OFFSET(gpmc_oen_ren), (MODE(3) | PULLUP_EN | RXACTIVE)}, /* QSPI_D1 */
113 	{OFFSET(gpmc_wen), (MODE(3) | PULLUP_EN | RXACTIVE)}, /* QSPI_D2 */
114 	{OFFSET(gpmc_be0n_cle), (MODE(3) | PULLUP_EN | RXACTIVE)}, /* QSPI_D3 */
115 	{-1},
116 };
117 
118 void enable_uart0_pin_mux(void)
119 {
120 	configure_module_pin_mux(uart0_pin_mux);
121 }
122 
123 void enable_board_pin_mux(void)
124 {
125 	configure_module_pin_mux(mmc0_pin_mux);
126 	configure_module_pin_mux(i2c0_pin_mux);
127 	configure_module_pin_mux(mdio_pin_mux);
128 
129 	if (board_is_evm()) {
130 		configure_module_pin_mux(gpio5_7_pin_mux);
131 		configure_module_pin_mux(rgmii1_pin_mux);
132 #if defined(CONFIG_NAND)
133 		configure_module_pin_mux(nand_pin_mux);
134 #endif
135 	} else if (board_is_sk() || board_is_idk()) {
136 		configure_module_pin_mux(rgmii1_pin_mux);
137 #if defined(CONFIG_NAND)
138 		printf("Error: NAND flash not present on this board\n");
139 #endif
140 		configure_module_pin_mux(qspi_pin_mux);
141 	} else if (board_is_eposevm()) {
142 		configure_module_pin_mux(rmii1_pin_mux);
143 #if defined(CONFIG_NAND)
144 		configure_module_pin_mux(nand_pin_mux);
145 #else
146 		configure_module_pin_mux(qspi_pin_mux);
147 #endif
148 	}
149 }
150 
151 void enable_i2c0_pin_mux(void)
152 {
153 	configure_module_pin_mux(i2c0_pin_mux);
154 }
155