xref: /openbmc/u-boot/board/ti/am43xx/mux.c (revision 8ee59472)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * mux.c
4  *
5  * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
6  */
7 
8 #include <common.h>
9 #include <asm/arch/sys_proto.h>
10 #include <asm/arch/mux.h>
11 #include "../common/board_detect.h"
12 #include "board.h"
13 
14 static struct module_pin_mux rmii1_pin_mux[] = {
15 	{OFFSET(mii1_txen), MODE(1)},			/* RMII1_TXEN */
16 	{OFFSET(mii1_txd1), MODE(1)},			/* RMII1_TD1 */
17 	{OFFSET(mii1_txd0), MODE(1)},			/* RMII1_TD0 */
18 	{OFFSET(mii1_rxd1), MODE(1) | RXACTIVE},	/* RMII1_RD1 */
19 	{OFFSET(mii1_rxd0), MODE(1) | RXACTIVE},	/* RMII1_RD0 */
20 	{OFFSET(mii1_rxdv), MODE(1) | RXACTIVE},	/* RMII1_RXDV */
21 	{OFFSET(mii1_crs), MODE(1) | RXACTIVE},		/* RMII1_CRS_DV */
22 	{OFFSET(mii1_rxerr), MODE(1) | RXACTIVE},	/* RMII1_RXERR */
23 	{OFFSET(rmii1_refclk), MODE(0) | RXACTIVE},	/* RMII1_refclk */
24 	{-1},
25 };
26 
27 static struct module_pin_mux rgmii1_pin_mux[] = {
28 	{OFFSET(mii1_txen), MODE(2)},			/* RGMII1_TCTL */
29 	{OFFSET(mii1_rxdv), MODE(2) | RXACTIVE},	/* RGMII1_RCTL */
30 	{OFFSET(mii1_txd3), MODE(2)},			/* RGMII1_TD3 */
31 	{OFFSET(mii1_txd2), MODE(2)},			/* RGMII1_TD2 */
32 	{OFFSET(mii1_txd1), MODE(2)},			/* RGMII1_TD1 */
33 	{OFFSET(mii1_txd0), MODE(2)},			/* RGMII1_TD0 */
34 	{OFFSET(mii1_txclk), MODE(2)},			/* RGMII1_TCLK */
35 	{OFFSET(mii1_rxclk), MODE(2) | RXACTIVE},	/* RGMII1_RCLK */
36 	{OFFSET(mii1_rxd3), MODE(2) | RXACTIVE},	/* RGMII1_RD3 */
37 	{OFFSET(mii1_rxd2), MODE(2) | RXACTIVE},	/* RGMII1_RD2 */
38 	{OFFSET(mii1_rxd1), MODE(2) | RXACTIVE},	/* RGMII1_RD1 */
39 	{OFFSET(mii1_rxd0), MODE(2) | RXACTIVE},	/* RGMII1_RD0 */
40 	{-1},
41 };
42 
43 static struct module_pin_mux mdio_pin_mux[] = {
44 	{OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN},/* MDIO_DATA */
45 	{OFFSET(mdio_clk), MODE(0) | PULLUP_EN},	/* MDIO_CLK */
46 	{-1},
47 };
48 
49 static struct module_pin_mux uart0_pin_mux[] = {
50 	{OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE | SLEWCTRL)},
51 	{OFFSET(uart0_txd), (MODE(0) | PULLUDDIS | PULLUP_EN | SLEWCTRL)},
52 	{-1},
53 };
54 
55 static struct module_pin_mux mmc0_pin_mux[] = {
56 	{OFFSET(mmc0_clk), (MODE(0) | PULLUDDIS | RXACTIVE)},  /* MMC0_CLK */
57 	{OFFSET(mmc0_cmd), (MODE(0) | PULLUP_EN | RXACTIVE)},  /* MMC0_CMD */
58 	{OFFSET(mmc0_dat0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* MMC0_DAT0 */
59 	{OFFSET(mmc0_dat1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* MMC0_DAT1 */
60 	{OFFSET(mmc0_dat2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* MMC0_DAT2 */
61 	{OFFSET(mmc0_dat3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* MMC0_DAT3 */
62 	{-1},
63 };
64 
65 static struct module_pin_mux i2c0_pin_mux[] = {
66 	{OFFSET(i2c0_sda), (MODE(0) | PULLUP_EN | RXACTIVE | SLEWCTRL)},
67 	{OFFSET(i2c0_scl), (MODE(0) | PULLUP_EN | RXACTIVE | SLEWCTRL)},
68 	{-1},
69 };
70 
71 static struct module_pin_mux gpio5_7_pin_mux[] = {
72 	{OFFSET(spi0_cs0), (MODE(7) | PULLUP_EN)},	/* GPIO5_7 */
73 	{-1},
74 };
75 
76 #ifdef CONFIG_NAND
77 static struct module_pin_mux nand_pin_mux[] = {
78 	{OFFSET(gpmc_ad0),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD0 */
79 	{OFFSET(gpmc_ad1),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD1 */
80 	{OFFSET(gpmc_ad2),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD2 */
81 	{OFFSET(gpmc_ad3),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD3 */
82 	{OFFSET(gpmc_ad4),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD4 */
83 	{OFFSET(gpmc_ad5),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD5 */
84 	{OFFSET(gpmc_ad6),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD6 */
85 	{OFFSET(gpmc_ad7),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD7 */
86 #ifdef CONFIG_SYS_NAND_BUSWIDTH_16BIT
87 	{OFFSET(gpmc_ad8),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD8  */
88 	{OFFSET(gpmc_ad9),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD9  */
89 	{OFFSET(gpmc_ad10),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD10 */
90 	{OFFSET(gpmc_ad11),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD11 */
91 	{OFFSET(gpmc_ad12),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD12 */
92 	{OFFSET(gpmc_ad13),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD13 */
93 	{OFFSET(gpmc_ad14),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD14 */
94 	{OFFSET(gpmc_ad15),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD15 */
95 #endif
96 	{OFFSET(gpmc_wait0),	(MODE(0) | RXACTIVE | PULLUP_EN)}, /* Wait */
97 	{OFFSET(gpmc_wpn),	(MODE(7) | PULLUP_EN)},	/* Write Protect */
98 	{OFFSET(gpmc_csn0),	(MODE(0) | PULLUP_EN)},	/* Chip-Select */
99 	{OFFSET(gpmc_wen),	(MODE(0) | PULLDOWN_EN)}, /* Write Enable */
100 	{OFFSET(gpmc_oen_ren),	(MODE(0) | PULLDOWN_EN)}, /* Read Enable */
101 	{OFFSET(gpmc_advn_ale),	(MODE(0) | PULLDOWN_EN)}, /* Addr Latch Enable*/
102 	{OFFSET(gpmc_be0n_cle),	(MODE(0) | PULLDOWN_EN)}, /* Byte Enable */
103 	{-1},
104 };
105 #endif
106 
107 static __maybe_unused struct module_pin_mux qspi_pin_mux[] = {
108 	{OFFSET(gpmc_csn0), (MODE(3) | PULLUP_EN | RXACTIVE)}, /* QSPI_CS0 */
109 	{OFFSET(gpmc_csn3), (MODE(2) | PULLUP_EN | RXACTIVE)}, /* QSPI_CLK */
110 	{OFFSET(gpmc_advn_ale), (MODE(3) | PULLUP_EN | RXACTIVE)}, /* QSPI_D0 */
111 	{OFFSET(gpmc_oen_ren), (MODE(3) | PULLUP_EN | RXACTIVE)}, /* QSPI_D1 */
112 	{OFFSET(gpmc_wen), (MODE(3) | PULLUP_EN | RXACTIVE)}, /* QSPI_D2 */
113 	{OFFSET(gpmc_be0n_cle), (MODE(3) | PULLUP_EN | RXACTIVE)}, /* QSPI_D3 */
114 	{-1},
115 };
116 
117 void enable_uart0_pin_mux(void)
118 {
119 	configure_module_pin_mux(uart0_pin_mux);
120 }
121 
122 void enable_board_pin_mux(void)
123 {
124 	configure_module_pin_mux(mmc0_pin_mux);
125 	configure_module_pin_mux(i2c0_pin_mux);
126 	configure_module_pin_mux(mdio_pin_mux);
127 
128 	if (board_is_evm()) {
129 		configure_module_pin_mux(gpio5_7_pin_mux);
130 		configure_module_pin_mux(rgmii1_pin_mux);
131 #if defined(CONFIG_NAND)
132 		configure_module_pin_mux(nand_pin_mux);
133 #endif
134 	} else if (board_is_sk() || board_is_idk()) {
135 		configure_module_pin_mux(rgmii1_pin_mux);
136 #if defined(CONFIG_NAND)
137 		printf("Error: NAND flash not present on this board\n");
138 #endif
139 		configure_module_pin_mux(qspi_pin_mux);
140 	} else if (board_is_eposevm()) {
141 		configure_module_pin_mux(rmii1_pin_mux);
142 #if defined(CONFIG_NAND)
143 		configure_module_pin_mux(nand_pin_mux);
144 #else
145 		configure_module_pin_mux(qspi_pin_mux);
146 #endif
147 	}
148 }
149 
150 void enable_i2c0_pin_mux(void)
151 {
152 	configure_module_pin_mux(i2c0_pin_mux);
153 }
154