1 /* 2 * board.c 3 * 4 * Board functions for TI AM335X based boards 5 * 6 * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License as 10 * published by the Free Software Foundation; either version 2 of 11 * the License, or (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the 16 * GNU General Public License for more details. 17 */ 18 19 #include <common.h> 20 #include <errno.h> 21 #include <spl.h> 22 #include <asm/arch/cpu.h> 23 #include <asm/arch/hardware.h> 24 #include <asm/arch/omap.h> 25 #include <asm/arch/ddr_defs.h> 26 #include <asm/arch/clock.h> 27 #include <asm/arch/gpio.h> 28 #include <asm/arch/mmc_host_def.h> 29 #include <asm/arch/sys_proto.h> 30 #include <asm/io.h> 31 #include <asm/emif.h> 32 #include <asm/gpio.h> 33 #include <i2c.h> 34 #include <miiphy.h> 35 #include <cpsw.h> 36 #include "board.h" 37 38 DECLARE_GLOBAL_DATA_PTR; 39 40 static struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE; 41 42 /* MII mode defines */ 43 #define MII_MODE_ENABLE 0x0 44 #define RGMII_MODE_ENABLE 0x3A 45 46 /* GPIO that controls power to DDR on EVM-SK */ 47 #define GPIO_DDR_VTT_EN 7 48 49 static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; 50 51 static struct am335x_baseboard_id __attribute__((section (".data"))) header; 52 53 static inline int board_is_bone(void) 54 { 55 return !strncmp(header.name, "A335BONE", HDR_NAME_LEN); 56 } 57 58 static inline int board_is_bone_lt(void) 59 { 60 return !strncmp(header.name, "A335BNLT", HDR_NAME_LEN); 61 } 62 63 static inline int board_is_evm_sk(void) 64 { 65 return !strncmp("A335X_SK", header.name, HDR_NAME_LEN); 66 } 67 68 static inline int board_is_idk(void) 69 { 70 return !strncmp(header.config, "SKU#02", 6); 71 } 72 73 static int __maybe_unused board_is_gp_evm(void) 74 { 75 return !strncmp("A33515BB", header.name, 8); 76 } 77 78 int board_is_evm_15_or_later(void) 79 { 80 return (!strncmp("A33515BB", header.name, 8) && 81 strncmp("1.5", header.version, 3) <= 0); 82 } 83 84 /* 85 * Read header information from EEPROM into global structure. 86 */ 87 static int read_eeprom(void) 88 { 89 /* Check if baseboard eeprom is available */ 90 if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) { 91 puts("Could not probe the EEPROM; something fundamentally " 92 "wrong on the I2C bus.\n"); 93 return -ENODEV; 94 } 95 96 /* read the eeprom using i2c */ 97 if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, (uchar *)&header, 98 sizeof(header))) { 99 puts("Could not read the EEPROM; something fundamentally" 100 " wrong on the I2C bus.\n"); 101 return -EIO; 102 } 103 104 if (header.magic != 0xEE3355AA) { 105 /* 106 * read the eeprom using i2c again, 107 * but use only a 1 byte address 108 */ 109 if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 1, 110 (uchar *)&header, sizeof(header))) { 111 puts("Could not read the EEPROM; something " 112 "fundamentally wrong on the I2C bus.\n"); 113 return -EIO; 114 } 115 116 if (header.magic != 0xEE3355AA) { 117 printf("Incorrect magic number (0x%x) in EEPROM\n", 118 header.magic); 119 return -EINVAL; 120 } 121 } 122 123 return 0; 124 } 125 126 #ifdef CONFIG_SPL_BUILD 127 static const struct ddr_data ddr2_data = { 128 .datardsratio0 = ((MT47H128M16RT25E_RD_DQS<<30) | 129 (MT47H128M16RT25E_RD_DQS<<20) | 130 (MT47H128M16RT25E_RD_DQS<<10) | 131 (MT47H128M16RT25E_RD_DQS<<0)), 132 .datawdsratio0 = ((MT47H128M16RT25E_WR_DQS<<30) | 133 (MT47H128M16RT25E_WR_DQS<<20) | 134 (MT47H128M16RT25E_WR_DQS<<10) | 135 (MT47H128M16RT25E_WR_DQS<<0)), 136 .datawiratio0 = ((MT47H128M16RT25E_PHY_WRLVL<<30) | 137 (MT47H128M16RT25E_PHY_WRLVL<<20) | 138 (MT47H128M16RT25E_PHY_WRLVL<<10) | 139 (MT47H128M16RT25E_PHY_WRLVL<<0)), 140 .datagiratio0 = ((MT47H128M16RT25E_PHY_GATELVL<<30) | 141 (MT47H128M16RT25E_PHY_GATELVL<<20) | 142 (MT47H128M16RT25E_PHY_GATELVL<<10) | 143 (MT47H128M16RT25E_PHY_GATELVL<<0)), 144 .datafwsratio0 = ((MT47H128M16RT25E_PHY_FIFO_WE<<30) | 145 (MT47H128M16RT25E_PHY_FIFO_WE<<20) | 146 (MT47H128M16RT25E_PHY_FIFO_WE<<10) | 147 (MT47H128M16RT25E_PHY_FIFO_WE<<0)), 148 .datawrsratio0 = ((MT47H128M16RT25E_PHY_WR_DATA<<30) | 149 (MT47H128M16RT25E_PHY_WR_DATA<<20) | 150 (MT47H128M16RT25E_PHY_WR_DATA<<10) | 151 (MT47H128M16RT25E_PHY_WR_DATA<<0)), 152 .datauserank0delay = MT47H128M16RT25E_PHY_RANK0_DELAY, 153 .datadldiff0 = PHY_DLL_LOCK_DIFF, 154 }; 155 156 static const struct cmd_control ddr2_cmd_ctrl_data = { 157 .cmd0csratio = MT47H128M16RT25E_RATIO, 158 .cmd0dldiff = MT47H128M16RT25E_DLL_LOCK_DIFF, 159 .cmd0iclkout = MT47H128M16RT25E_INVERT_CLKOUT, 160 161 .cmd1csratio = MT47H128M16RT25E_RATIO, 162 .cmd1dldiff = MT47H128M16RT25E_DLL_LOCK_DIFF, 163 .cmd1iclkout = MT47H128M16RT25E_INVERT_CLKOUT, 164 165 .cmd2csratio = MT47H128M16RT25E_RATIO, 166 .cmd2dldiff = MT47H128M16RT25E_DLL_LOCK_DIFF, 167 .cmd2iclkout = MT47H128M16RT25E_INVERT_CLKOUT, 168 }; 169 170 static const struct emif_regs ddr2_emif_reg_data = { 171 .sdram_config = MT47H128M16RT25E_EMIF_SDCFG, 172 .ref_ctrl = MT47H128M16RT25E_EMIF_SDREF, 173 .sdram_tim1 = MT47H128M16RT25E_EMIF_TIM1, 174 .sdram_tim2 = MT47H128M16RT25E_EMIF_TIM2, 175 .sdram_tim3 = MT47H128M16RT25E_EMIF_TIM3, 176 .emif_ddr_phy_ctlr_1 = MT47H128M16RT25E_EMIF_READ_LATENCY, 177 }; 178 179 static const struct ddr_data ddr3_data = { 180 .datardsratio0 = MT41J128MJT125_RD_DQS, 181 .datawdsratio0 = MT41J128MJT125_WR_DQS, 182 .datafwsratio0 = MT41J128MJT125_PHY_FIFO_WE, 183 .datawrsratio0 = MT41J128MJT125_PHY_WR_DATA, 184 .datadldiff0 = PHY_DLL_LOCK_DIFF, 185 }; 186 187 static const struct ddr_data ddr3_beagleblack_data = { 188 .datardsratio0 = MT41K256M16HA125E_RD_DQS, 189 .datawdsratio0 = MT41K256M16HA125E_WR_DQS, 190 .datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE, 191 .datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA, 192 .datadldiff0 = PHY_DLL_LOCK_DIFF, 193 }; 194 195 static const struct ddr_data ddr3_evm_data = { 196 .datardsratio0 = MT41J512M8RH125_RD_DQS, 197 .datawdsratio0 = MT41J512M8RH125_WR_DQS, 198 .datafwsratio0 = MT41J512M8RH125_PHY_FIFO_WE, 199 .datawrsratio0 = MT41J512M8RH125_PHY_WR_DATA, 200 .datadldiff0 = PHY_DLL_LOCK_DIFF, 201 }; 202 203 static const struct cmd_control ddr3_cmd_ctrl_data = { 204 .cmd0csratio = MT41J128MJT125_RATIO, 205 .cmd0dldiff = MT41J128MJT125_DLL_LOCK_DIFF, 206 .cmd0iclkout = MT41J128MJT125_INVERT_CLKOUT, 207 208 .cmd1csratio = MT41J128MJT125_RATIO, 209 .cmd1dldiff = MT41J128MJT125_DLL_LOCK_DIFF, 210 .cmd1iclkout = MT41J128MJT125_INVERT_CLKOUT, 211 212 .cmd2csratio = MT41J128MJT125_RATIO, 213 .cmd2dldiff = MT41J128MJT125_DLL_LOCK_DIFF, 214 .cmd2iclkout = MT41J128MJT125_INVERT_CLKOUT, 215 }; 216 217 static const struct cmd_control ddr3_beagleblack_cmd_ctrl_data = { 218 .cmd0csratio = MT41K256M16HA125E_RATIO, 219 .cmd0dldiff = MT41K256M16HA125E_DLL_LOCK_DIFF, 220 .cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT, 221 222 .cmd1csratio = MT41K256M16HA125E_RATIO, 223 .cmd1dldiff = MT41K256M16HA125E_DLL_LOCK_DIFF, 224 .cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT, 225 226 .cmd2csratio = MT41K256M16HA125E_RATIO, 227 .cmd2dldiff = MT41K256M16HA125E_DLL_LOCK_DIFF, 228 .cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT, 229 }; 230 231 static const struct cmd_control ddr3_evm_cmd_ctrl_data = { 232 .cmd0csratio = MT41J512M8RH125_RATIO, 233 .cmd0dldiff = MT41J512M8RH125_DLL_LOCK_DIFF, 234 .cmd0iclkout = MT41J512M8RH125_INVERT_CLKOUT, 235 236 .cmd1csratio = MT41J512M8RH125_RATIO, 237 .cmd1dldiff = MT41J512M8RH125_DLL_LOCK_DIFF, 238 .cmd1iclkout = MT41J512M8RH125_INVERT_CLKOUT, 239 240 .cmd2csratio = MT41J512M8RH125_RATIO, 241 .cmd2dldiff = MT41J512M8RH125_DLL_LOCK_DIFF, 242 .cmd2iclkout = MT41J512M8RH125_INVERT_CLKOUT, 243 }; 244 245 static struct emif_regs ddr3_emif_reg_data = { 246 .sdram_config = MT41J128MJT125_EMIF_SDCFG, 247 .ref_ctrl = MT41J128MJT125_EMIF_SDREF, 248 .sdram_tim1 = MT41J128MJT125_EMIF_TIM1, 249 .sdram_tim2 = MT41J128MJT125_EMIF_TIM2, 250 .sdram_tim3 = MT41J128MJT125_EMIF_TIM3, 251 .zq_config = MT41J128MJT125_ZQ_CFG, 252 .emif_ddr_phy_ctlr_1 = MT41J128MJT125_EMIF_READ_LATENCY | 253 PHY_EN_DYN_PWRDN, 254 }; 255 256 static struct emif_regs ddr3_beagleblack_emif_reg_data = { 257 .sdram_config = MT41K256M16HA125E_EMIF_SDCFG, 258 .ref_ctrl = MT41K256M16HA125E_EMIF_SDREF, 259 .sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1, 260 .sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2, 261 .sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3, 262 .zq_config = MT41K256M16HA125E_ZQ_CFG, 263 .emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY, 264 }; 265 266 static struct emif_regs ddr3_evm_emif_reg_data = { 267 .sdram_config = MT41J512M8RH125_EMIF_SDCFG, 268 .ref_ctrl = MT41J512M8RH125_EMIF_SDREF, 269 .sdram_tim1 = MT41J512M8RH125_EMIF_TIM1, 270 .sdram_tim2 = MT41J512M8RH125_EMIF_TIM2, 271 .sdram_tim3 = MT41J512M8RH125_EMIF_TIM3, 272 .zq_config = MT41J512M8RH125_ZQ_CFG, 273 .emif_ddr_phy_ctlr_1 = MT41J512M8RH125_EMIF_READ_LATENCY | 274 PHY_EN_DYN_PWRDN, 275 }; 276 #endif 277 278 /* 279 * early system init of muxing and clocks. 280 */ 281 void s_init(void) 282 { 283 /* 284 * Save the boot parameters passed from romcode. 285 * We cannot delay the saving further than this, 286 * to prevent overwrites. 287 */ 288 #ifdef CONFIG_SPL_BUILD 289 save_omap_boot_params(); 290 #endif 291 292 /* WDT1 is already running when the bootloader gets control 293 * Disable it to avoid "random" resets 294 */ 295 writel(0xAAAA, &wdtimer->wdtwspr); 296 while (readl(&wdtimer->wdtwwps) != 0x0) 297 ; 298 writel(0x5555, &wdtimer->wdtwspr); 299 while (readl(&wdtimer->wdtwwps) != 0x0) 300 ; 301 302 #ifdef CONFIG_SPL_BUILD 303 /* Setup the PLLs and the clocks for the peripherals */ 304 pll_init(); 305 306 /* Enable RTC32K clock */ 307 rtc32k_enable(); 308 309 #ifdef CONFIG_SERIAL1 310 enable_uart0_pin_mux(); 311 #endif /* CONFIG_SERIAL1 */ 312 #ifdef CONFIG_SERIAL2 313 enable_uart1_pin_mux(); 314 #endif /* CONFIG_SERIAL2 */ 315 #ifdef CONFIG_SERIAL3 316 enable_uart2_pin_mux(); 317 #endif /* CONFIG_SERIAL3 */ 318 #ifdef CONFIG_SERIAL4 319 enable_uart3_pin_mux(); 320 #endif /* CONFIG_SERIAL4 */ 321 #ifdef CONFIG_SERIAL5 322 enable_uart4_pin_mux(); 323 #endif /* CONFIG_SERIAL5 */ 324 #ifdef CONFIG_SERIAL6 325 enable_uart5_pin_mux(); 326 #endif /* CONFIG_SERIAL6 */ 327 328 uart_soft_reset(); 329 330 gd = &gdata; 331 332 preloader_console_init(); 333 334 /* Initalize the board header */ 335 enable_i2c0_pin_mux(); 336 i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); 337 if (read_eeprom() < 0) 338 puts("Could not get board ID.\n"); 339 340 enable_board_pin_mux(&header); 341 if (board_is_evm_sk()) { 342 /* 343 * EVM SK 1.2A and later use gpio0_7 to enable DDR3. 344 * This is safe enough to do on older revs. 345 */ 346 gpio_request(GPIO_DDR_VTT_EN, "ddr_vtt_en"); 347 gpio_direction_output(GPIO_DDR_VTT_EN, 1); 348 } 349 350 if (board_is_evm_sk()) 351 config_ddr(303, MT41J128MJT125_IOCTRL_VALUE, &ddr3_data, 352 &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0); 353 else if (board_is_bone_lt()) 354 config_ddr(400, MT41K256M16HA125E_IOCTRL_VALUE, 355 &ddr3_beagleblack_data, 356 &ddr3_beagleblack_cmd_ctrl_data, 357 &ddr3_beagleblack_emif_reg_data, 0); 358 else if (board_is_evm_15_or_later()) 359 config_ddr(303, MT41J512M8RH125_IOCTRL_VALUE, &ddr3_evm_data, 360 &ddr3_evm_cmd_ctrl_data, &ddr3_evm_emif_reg_data, 0); 361 else 362 config_ddr(266, MT47H128M16RT25E_IOCTRL_VALUE, &ddr2_data, 363 &ddr2_cmd_ctrl_data, &ddr2_emif_reg_data, 0); 364 #endif 365 } 366 367 /* 368 * Basic board specific setup. Pinmux has been handled already. 369 */ 370 int board_init(void) 371 { 372 i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); 373 if (read_eeprom() < 0) 374 puts("Could not get board ID.\n"); 375 376 gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100; 377 378 gpmc_init(); 379 380 return 0; 381 } 382 383 #ifdef CONFIG_BOARD_LATE_INIT 384 int board_late_init(void) 385 { 386 #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG 387 char safe_string[HDR_NAME_LEN + 1]; 388 389 /* Now set variables based on the header. */ 390 strncpy(safe_string, (char *)header.name, sizeof(header.name)); 391 safe_string[sizeof(header.name)] = 0; 392 setenv("board_name", safe_string); 393 394 strncpy(safe_string, (char *)header.version, sizeof(header.version)); 395 safe_string[sizeof(header.version)] = 0; 396 setenv("board_rev", safe_string); 397 #endif 398 399 return 0; 400 } 401 #endif 402 403 #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ 404 (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) 405 static void cpsw_control(int enabled) 406 { 407 /* VTP can be added here */ 408 409 return; 410 } 411 412 static struct cpsw_slave_data cpsw_slaves[] = { 413 { 414 .slave_reg_ofs = 0x208, 415 .sliver_reg_ofs = 0xd80, 416 .phy_id = 0, 417 }, 418 { 419 .slave_reg_ofs = 0x308, 420 .sliver_reg_ofs = 0xdc0, 421 .phy_id = 1, 422 }, 423 }; 424 425 static struct cpsw_platform_data cpsw_data = { 426 .mdio_base = CPSW_MDIO_BASE, 427 .cpsw_base = CPSW_BASE, 428 .mdio_div = 0xff, 429 .channels = 8, 430 .cpdma_reg_ofs = 0x800, 431 .slaves = 1, 432 .slave_data = cpsw_slaves, 433 .ale_reg_ofs = 0xd00, 434 .ale_entries = 1024, 435 .host_port_reg_ofs = 0x108, 436 .hw_stats_reg_ofs = 0x900, 437 .mac_control = (1 << 5), 438 .control = cpsw_control, 439 .host_port_num = 0, 440 .version = CPSW_CTRL_VERSION_2, 441 }; 442 #endif 443 444 #if defined(CONFIG_DRIVER_TI_CPSW) || \ 445 (defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET)) 446 int board_eth_init(bd_t *bis) 447 { 448 int rv, n = 0; 449 uint8_t mac_addr[6]; 450 uint32_t mac_hi, mac_lo; 451 452 /* try reading mac address from efuse */ 453 mac_lo = readl(&cdev->macid0l); 454 mac_hi = readl(&cdev->macid0h); 455 mac_addr[0] = mac_hi & 0xFF; 456 mac_addr[1] = (mac_hi & 0xFF00) >> 8; 457 mac_addr[2] = (mac_hi & 0xFF0000) >> 16; 458 mac_addr[3] = (mac_hi & 0xFF000000) >> 24; 459 mac_addr[4] = mac_lo & 0xFF; 460 mac_addr[5] = (mac_lo & 0xFF00) >> 8; 461 462 #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ 463 (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) 464 if (!getenv("ethaddr")) { 465 printf("<ethaddr> not set. Validating first E-fuse MAC\n"); 466 467 if (is_valid_ether_addr(mac_addr)) 468 eth_setenv_enetaddr("ethaddr", mac_addr); 469 } 470 471 #ifdef CONFIG_DRIVER_TI_CPSW 472 if (board_is_bone() || board_is_bone_lt() || board_is_idk()) { 473 writel(MII_MODE_ENABLE, &cdev->miisel); 474 cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = 475 PHY_INTERFACE_MODE_MII; 476 } else { 477 writel(RGMII_MODE_ENABLE, &cdev->miisel); 478 cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = 479 PHY_INTERFACE_MODE_RGMII; 480 } 481 482 rv = cpsw_register(&cpsw_data); 483 if (rv < 0) 484 printf("Error %d registering CPSW switch\n", rv); 485 else 486 n += rv; 487 #endif 488 489 /* 490 * 491 * CPSW RGMII Internal Delay Mode is not supported in all PVT 492 * operating points. So we must set the TX clock delay feature 493 * in the AR8051 PHY. Since we only support a single ethernet 494 * device in U-Boot, we only do this for the first instance. 495 */ 496 #define AR8051_PHY_DEBUG_ADDR_REG 0x1d 497 #define AR8051_PHY_DEBUG_DATA_REG 0x1e 498 #define AR8051_DEBUG_RGMII_CLK_DLY_REG 0x5 499 #define AR8051_RGMII_TX_CLK_DLY 0x100 500 501 if (board_is_evm_sk() || board_is_gp_evm()) { 502 const char *devname; 503 devname = miiphy_get_current_dev(); 504 505 miiphy_write(devname, 0x0, AR8051_PHY_DEBUG_ADDR_REG, 506 AR8051_DEBUG_RGMII_CLK_DLY_REG); 507 miiphy_write(devname, 0x0, AR8051_PHY_DEBUG_DATA_REG, 508 AR8051_RGMII_TX_CLK_DLY); 509 } 510 #endif 511 #if defined(CONFIG_USB_ETHER) && \ 512 (!defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_USBETH_SUPPORT)) 513 if (is_valid_ether_addr(mac_addr)) 514 eth_setenv_enetaddr("usbnet_devaddr", mac_addr); 515 516 rv = usb_eth_initialize(bis); 517 if (rv < 0) 518 printf("Error %d registering USB_ETHER\n", rv); 519 else 520 n += rv; 521 #endif 522 return n; 523 } 524 #endif 525