1 /* 2 * Copyright (C) 2011 3 * Stefano Babic, DENX Software Engineering, sbabic@denx.de. 4 * 5 * Copyright (C) 2009 TechNexion Ltd. 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License as published by 9 * the Free Software Foundation; either version 2 of the License, or 10 * (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc. 20 */ 21 22 #include <common.h> 23 #include <netdev.h> 24 #include <fpga.h> 25 #include <asm/io.h> 26 #include <asm/arch/mem.h> 27 #include <asm/arch/mux.h> 28 #include <asm/arch/sys_proto.h> 29 #include <asm/omap_gpio.h> 30 #include <asm/arch/mmc_host_def.h> 31 #include <i2c.h> 32 #include <spartan3.h> 33 #include <asm/gpio.h> 34 #ifdef CONFIG_USB_EHCI 35 #include <usb.h> 36 #include <asm/ehci-omap.h> 37 #endif 38 #include "mt_ventoux.h" 39 40 DECLARE_GLOBAL_DATA_PTR; 41 42 #ifndef CONFIG_FPGA 43 #error "The Teejet mt_ventoux must have CONFIG_FPGA enabled" 44 #endif 45 46 #define FPGA_RESET 62 47 #define FPGA_PROG 116 48 #define FPGA_CCLK 117 49 #define FPGA_DIN 118 50 #define FPGA_INIT 119 51 #define FPGA_DONE 154 52 53 /* Timing definitions for FPGA */ 54 static const u32 gpmc_fpga[] = { 55 FPGA_GPMC_CONFIG1, 56 FPGA_GPMC_CONFIG2, 57 FPGA_GPMC_CONFIG3, 58 FPGA_GPMC_CONFIG4, 59 FPGA_GPMC_CONFIG5, 60 FPGA_GPMC_CONFIG6, 61 }; 62 63 #ifdef CONFIG_USB_EHCI 64 static struct omap_usbhs_board_data usbhs_bdata = { 65 .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, 66 .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, 67 .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, 68 }; 69 70 int ehci_hcd_init(void) 71 { 72 return omap_ehci_hcd_init(&usbhs_bdata); 73 } 74 75 int ehci_hcd_stop(void) 76 { 77 return omap_ehci_hcd_stop(); 78 } 79 #endif 80 81 82 static inline void fpga_reset(int nassert) 83 { 84 gpio_set_value(FPGA_RESET, !nassert); 85 } 86 87 int fpga_pgm_fn(int nassert, int nflush, int cookie) 88 { 89 debug("%s:%d: FPGA PROGRAM ", __func__, __LINE__); 90 91 gpio_set_value(FPGA_PROG, !nassert); 92 93 return nassert; 94 } 95 96 int fpga_init_fn(int cookie) 97 { 98 return !gpio_get_value(FPGA_INIT); 99 } 100 101 int fpga_done_fn(int cookie) 102 { 103 return gpio_get_value(FPGA_DONE); 104 } 105 106 int fpga_pre_config_fn(int cookie) 107 { 108 debug("%s:%d: FPGA pre-configuration\n", __func__, __LINE__); 109 110 /* Setting GPIOs for programming Mode */ 111 gpio_request(FPGA_RESET, "FPGA_RESET"); 112 gpio_direction_output(FPGA_RESET, 1); 113 gpio_request(FPGA_PROG, "FPGA_PROG"); 114 gpio_direction_output(FPGA_PROG, 1); 115 gpio_request(FPGA_CCLK, "FPGA_CCLK"); 116 gpio_direction_output(FPGA_CCLK, 1); 117 gpio_request(FPGA_DIN, "FPGA_DIN"); 118 gpio_direction_output(FPGA_DIN, 0); 119 gpio_request(FPGA_INIT, "FPGA_INIT"); 120 gpio_direction_input(FPGA_INIT); 121 gpio_request(FPGA_DONE, "FPGA_DONE"); 122 gpio_direction_input(FPGA_DONE); 123 124 /* Be sure that signal are deasserted */ 125 gpio_set_value(FPGA_RESET, 1); 126 gpio_set_value(FPGA_PROG, 1); 127 128 return 0; 129 } 130 131 int fpga_post_config_fn(int cookie) 132 { 133 debug("%s:%d: FPGA post-configuration\n", __func__, __LINE__); 134 135 fpga_reset(TRUE); 136 udelay(100); 137 fpga_reset(FALSE); 138 139 return 0; 140 } 141 142 /* Write program to the FPGA */ 143 int fpga_wr_fn(int nassert_write, int flush, int cookie) 144 { 145 gpio_set_value(FPGA_DIN, nassert_write); 146 147 return nassert_write; 148 } 149 150 int fpga_clk_fn(int assert_clk, int flush, int cookie) 151 { 152 gpio_set_value(FPGA_CCLK, assert_clk); 153 154 return assert_clk; 155 } 156 157 Xilinx_Spartan3_Slave_Serial_fns mt_ventoux_fpga_fns = { 158 fpga_pre_config_fn, 159 fpga_pgm_fn, 160 fpga_clk_fn, 161 fpga_init_fn, 162 fpga_done_fn, 163 fpga_wr_fn, 164 fpga_post_config_fn, 165 }; 166 167 Xilinx_desc fpga = XILINX_XC6SLX4_DESC(slave_serial, 168 (void *)&mt_ventoux_fpga_fns, 0); 169 170 /* Initialize the FPGA */ 171 static void mt_ventoux_init_fpga(void) 172 { 173 fpga_pre_config_fn(0); 174 175 /* Setting CS1 for FPGA access */ 176 enable_gpmc_cs_config(gpmc_fpga, &gpmc_cfg->cs[1], 177 FPGA_BASE_ADDR, GPMC_SIZE_128M); 178 179 fpga_init(); 180 fpga_add(fpga_xilinx, &fpga); 181 } 182 183 /* 184 * Routine: board_init 185 * Description: Early hardware init. 186 */ 187 int board_init(void) 188 { 189 gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ 190 191 /* boot param addr */ 192 gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); 193 194 mt_ventoux_init_fpga(); 195 196 return 0; 197 } 198 199 int misc_init_r(void) 200 { 201 dieid_num_r(); 202 203 return 0; 204 } 205 206 /* 207 * Routine: set_muxconf_regs 208 * Description: Setting up the configuration Mux registers specific to the 209 * hardware. Many pins need to be moved from protect to primary 210 * mode. 211 */ 212 void set_muxconf_regs(void) 213 { 214 MUX_MT_VENTOUX(); 215 } 216 217 /* 218 * Initializes on-chip ethernet controllers. 219 * to override, implement board_eth_init() 220 */ 221 int board_eth_init(bd_t *bis) 222 { 223 davinci_emac_initialize(); 224 return 0; 225 } 226 227 #if defined(CONFIG_OMAP_HSMMC) && \ 228 !defined(CONFIG_SPL_BUILD) 229 int board_mmc_init(bd_t *bis) 230 { 231 return omap_mmc_init(0); 232 } 233 #endif 234