1 /*
2  * Copyright (C) 2011
3  * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
4  *
5  * Copyright (C) 2009 TechNexion Ltd.
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License as published by
9  * the Free Software Foundation; either version 2 of the License, or
10  * (at your option) any later version.
11  *
12  * This program is distributed in the hope that it will be useful,
13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15  * GNU General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License
18  * along with this program; if not, write to the Free Software
19  * Foundation, Inc.
20  */
21 
22 #include <common.h>
23 #include <netdev.h>
24 #include <malloc.h>
25 #include <fpga.h>
26 #include <video_fb.h>
27 #include <asm/io.h>
28 #include <asm/arch/mem.h>
29 #include <asm/arch/mux.h>
30 #include <asm/arch/sys_proto.h>
31 #include <asm/omap_gpio.h>
32 #include <asm/arch/mmc_host_def.h>
33 #include <asm/arch/dss.h>
34 #include <asm/arch/clocks.h>
35 #include <i2c.h>
36 #include <spartan3.h>
37 #include <asm/gpio.h>
38 #ifdef CONFIG_USB_EHCI
39 #include <usb.h>
40 #include <asm/ehci-omap.h>
41 #endif
42 #include "mt_ventoux.h"
43 
44 DECLARE_GLOBAL_DATA_PTR;
45 
46 #define BUZZER		140
47 #define SPEAKER		141
48 #define USB1_PWR	127
49 #define USB2_PWR	149
50 
51 #ifndef CONFIG_FPGA
52 #error "The Teejet mt_ventoux must have CONFIG_FPGA enabled"
53 #endif
54 
55 #define FPGA_RESET	62
56 #define FPGA_PROG	116
57 #define FPGA_CCLK	117
58 #define FPGA_DIN	118
59 #define FPGA_INIT	119
60 #define FPGA_DONE	154
61 
62 #define LCD_PWR		138
63 #define LCD_PON_PIN	139
64 
65 #if defined(CONFIG_VIDEO) && !defined(CONFIG_SPL_BUILD)
66 static struct {
67 	u32 xres;
68 	u32 yres;
69 } panel_resolution[] = {
70 	{ 480, 272 },
71 	{ 800, 480 }
72 };
73 
74 static struct panel_config lcd_cfg[] = {
75 	{
76 	.timing_h       = PANEL_TIMING_H(4, 8, 41),
77 	.timing_v       = PANEL_TIMING_V(2, 4, 10),
78 	.pol_freq       = 0x00000000, /* Pol Freq */
79 	.divisor        = 0x0001000d, /* 33Mhz Pixel Clock */
80 	.panel_type     = 0x01, /* TFT */
81 	.data_lines     = 0x03, /* 24 Bit RGB */
82 	.load_mode      = 0x02, /* Frame Mode */
83 	.panel_color	= 0,
84 	},
85 	{
86 	.timing_h       = PANEL_TIMING_H(20, 192, 4),
87 	.timing_v       = PANEL_TIMING_V(2, 20, 10),
88 	.pol_freq       = 0x00004000, /* Pol Freq */
89 	.divisor        = 0x0001000E, /* 36Mhz Pixel Clock */
90 	.panel_type     = 0x01, /* TFT */
91 	.data_lines     = 0x03, /* 24 Bit RGB */
92 	.load_mode      = 0x02, /* Frame Mode */
93 	.panel_color	= 0,
94 	}
95 };
96 #endif
97 
98 /* Timing definitions for FPGA */
99 static const u32 gpmc_fpga[] = {
100 	FPGA_GPMC_CONFIG1,
101 	FPGA_GPMC_CONFIG2,
102 	FPGA_GPMC_CONFIG3,
103 	FPGA_GPMC_CONFIG4,
104 	FPGA_GPMC_CONFIG5,
105 	FPGA_GPMC_CONFIG6,
106 };
107 
108 #ifdef CONFIG_USB_EHCI
109 static struct omap_usbhs_board_data usbhs_bdata = {
110 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
111 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
112 	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
113 };
114 
115 int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
116 {
117 	return omap_ehci_hcd_init(&usbhs_bdata, hccr, hcor);
118 }
119 
120 int ehci_hcd_stop(int index)
121 {
122 	return omap_ehci_hcd_stop();
123 }
124 #endif
125 
126 
127 static inline void fpga_reset(int nassert)
128 {
129 	gpio_set_value(FPGA_RESET, !nassert);
130 }
131 
132 int fpga_pgm_fn(int nassert, int nflush, int cookie)
133 {
134 	debug("%s:%d: FPGA PROGRAM ", __func__, __LINE__);
135 
136 	gpio_set_value(FPGA_PROG, !nassert);
137 
138 	return nassert;
139 }
140 
141 int fpga_init_fn(int cookie)
142 {
143 	return !gpio_get_value(FPGA_INIT);
144 }
145 
146 int fpga_done_fn(int cookie)
147 {
148 	return gpio_get_value(FPGA_DONE);
149 }
150 
151 int fpga_pre_config_fn(int cookie)
152 {
153 	debug("%s:%d: FPGA pre-configuration\n", __func__, __LINE__);
154 
155 	/* Setting GPIOs for programming Mode */
156 	gpio_request(FPGA_RESET, "FPGA_RESET");
157 	gpio_direction_output(FPGA_RESET, 1);
158 	gpio_request(FPGA_PROG, "FPGA_PROG");
159 	gpio_direction_output(FPGA_PROG, 1);
160 	gpio_request(FPGA_CCLK, "FPGA_CCLK");
161 	gpio_direction_output(FPGA_CCLK, 1);
162 	gpio_request(FPGA_DIN, "FPGA_DIN");
163 	gpio_direction_output(FPGA_DIN, 0);
164 	gpio_request(FPGA_INIT, "FPGA_INIT");
165 	gpio_direction_input(FPGA_INIT);
166 	gpio_request(FPGA_DONE, "FPGA_DONE");
167 	gpio_direction_input(FPGA_DONE);
168 
169 	/* Be sure that signal are deasserted */
170 	gpio_set_value(FPGA_RESET, 1);
171 	gpio_set_value(FPGA_PROG, 1);
172 
173 	return 0;
174 }
175 
176 int fpga_post_config_fn(int cookie)
177 {
178 	debug("%s:%d: FPGA post-configuration\n", __func__, __LINE__);
179 
180 	fpga_reset(TRUE);
181 	udelay(100);
182 	fpga_reset(FALSE);
183 
184 	return 0;
185 }
186 
187 /* Write program to the FPGA */
188 int fpga_wr_fn(int nassert_write, int flush, int cookie)
189 {
190 	gpio_set_value(FPGA_DIN, nassert_write);
191 
192 	return nassert_write;
193 }
194 
195 int fpga_clk_fn(int assert_clk, int flush, int cookie)
196 {
197 	gpio_set_value(FPGA_CCLK, assert_clk);
198 
199 	return assert_clk;
200 }
201 
202 Xilinx_Spartan3_Slave_Serial_fns mt_ventoux_fpga_fns = {
203 	fpga_pre_config_fn,
204 	fpga_pgm_fn,
205 	fpga_clk_fn,
206 	fpga_init_fn,
207 	fpga_done_fn,
208 	fpga_wr_fn,
209 	fpga_post_config_fn,
210 };
211 
212 Xilinx_desc fpga = XILINX_XC6SLX4_DESC(slave_serial,
213 			(void *)&mt_ventoux_fpga_fns, 0);
214 
215 /* Initialize the FPGA */
216 static void mt_ventoux_init_fpga(void)
217 {
218 	fpga_pre_config_fn(0);
219 
220 	/* Setting CS1 for FPGA access */
221 	enable_gpmc_cs_config(gpmc_fpga, &gpmc_cfg->cs[1],
222 		FPGA_BASE_ADDR, GPMC_SIZE_128M);
223 
224 	fpga_init();
225 	fpga_add(fpga_xilinx, &fpga);
226 }
227 
228 /*
229  * Routine: board_init
230  * Description: Early hardware init.
231  */
232 int board_init(void)
233 {
234 	gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
235 
236 	/* boot param addr */
237 	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
238 
239 	mt_ventoux_init_fpga();
240 
241 	/* GPIO_140: speaker #mute */
242 	MUX_VAL(CP(MCBSP3_DX),		(IEN | PTU | EN | M4))
243 	/* GPIO_141: Buzz Hi */
244 	MUX_VAL(CP(MCBSP3_DR),		(IEN  | PTU | EN | M4))
245 
246 	/* Turning off the buzzer */
247 	gpio_request(BUZZER, "BUZZER_MUTE");
248 	gpio_request(SPEAKER, "SPEAKER");
249 	gpio_direction_output(BUZZER, 0);
250 	gpio_direction_output(SPEAKER, 0);
251 
252 	/* Activate USB power */
253 	gpio_request(USB1_PWR, "USB1_PWR");
254 	gpio_request(USB2_PWR, "USB2_PWR");
255 	gpio_direction_output(USB1_PWR, 1);
256 	gpio_direction_output(USB2_PWR, 1);
257 
258 	return 0;
259 }
260 
261 int misc_init_r(void)
262 {
263 	char *eth_addr;
264 
265 	dieid_num_r();
266 
267 	eth_addr = getenv("ethaddr");
268 	if (eth_addr)
269 		return 0;
270 
271 #ifndef CONFIG_SPL_BUILD
272 	TAM3517_READ_MAC_FROM_EEPROM;
273 #endif
274 	return 0;
275 }
276 
277 /*
278  * Routine: set_muxconf_regs
279  * Description: Setting up the configuration Mux registers specific to the
280  *		hardware. Many pins need to be moved from protect to primary
281  *		mode.
282  */
283 void set_muxconf_regs(void)
284 {
285 	MUX_MT_VENTOUX();
286 }
287 
288 /*
289  * Initializes on-chip ethernet controllers.
290  * to override, implement board_eth_init()
291  */
292 int board_eth_init(bd_t *bis)
293 {
294 	davinci_emac_initialize();
295 	return 0;
296 }
297 
298 #if defined(CONFIG_OMAP_HSMMC) && \
299 	!defined(CONFIG_SPL_BUILD)
300 int board_mmc_init(bd_t *bis)
301 {
302 	return omap_mmc_init(0, 0, 0);
303 }
304 #endif
305 
306 #if defined(CONFIG_VIDEO) && !defined(CONFIG_SPL_BUILD)
307 int board_video_init(void)
308 {
309 	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
310 	struct panel_config *panel = &lcd_cfg[0];
311 	char *s;
312 	u32 index = 0;
313 
314 	void *fb;
315 
316 	fb = (void *)0x88000000;
317 
318 	s = getenv("panel");
319 	if (s) {
320 		index = simple_strtoul(s, NULL, 10);
321 		if (index < ARRAY_SIZE(lcd_cfg))
322 			panel = &lcd_cfg[index];
323 		else
324 			return 0;
325 	}
326 
327 	panel->frame_buffer = fb;
328 	printf("Panel: %dx%d\n", panel_resolution[index].xres,
329 		panel_resolution[index].yres);
330 	panel->lcd_size = (panel_resolution[index].yres - 1) << 16 |
331 		(panel_resolution[index].xres - 1);
332 
333 	gpio_request(LCD_PWR, "LCD Power");
334 	gpio_request(LCD_PON_PIN, "LCD Pon");
335 	gpio_direction_output(LCD_PWR, 0);
336 	gpio_direction_output(LCD_PON_PIN, 1);
337 
338 
339 	setbits_le32(&prcm_base->fclken_dss, FCK_DSS_ON);
340 	setbits_le32(&prcm_base->iclken_dss, ICK_DSS_ON);
341 
342 	omap3_dss_panel_config(panel);
343 	omap3_dss_enable();
344 
345 	return 0;
346 }
347 #endif
348