1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * (C) Copyright 2015 Savoir-faire Linux Inc.
4  *
5  * Derived from MX51EVK code by
6  *   Freescale Semiconductor, Inc.
7  */
8 
9 #include <common.h>
10 #include <asm/io.h>
11 #include <asm/gpio.h>
12 #include <asm/arch/imx-regs.h>
13 #include <asm/arch/iomux-mx51.h>
14 #include <linux/errno.h>
15 #include <asm/arch/sys_proto.h>
16 #include <asm/arch/crm_regs.h>
17 #include <asm/arch/clock.h>
18 #include <asm/mach-imx/mx5_video.h>
19 #include <environment.h>
20 #include <mmc.h>
21 #include <input.h>
22 #include <fsl_esdhc.h>
23 #include <mc13892.h>
24 
25 #include <malloc.h>
26 #include <netdev.h>
27 #include <phy.h>
28 #include "ts4800.h"
29 
30 DECLARE_GLOBAL_DATA_PTR;
31 
32 #ifdef CONFIG_FSL_ESDHC
33 struct fsl_esdhc_cfg esdhc_cfg[2] = {
34 	{MMC_SDHC1_BASE_ADDR},
35 	{MMC_SDHC2_BASE_ADDR},
36 };
37 #endif
38 
39 int dram_init(void)
40 {
41 	/* dram_init must store complete ramsize in gd->ram_size */
42 	gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
43 				PHYS_SDRAM_1_SIZE);
44 	return 0;
45 }
46 
47 u32 get_board_rev(void)
48 {
49 	u32 rev = get_cpu_rev();
50 	if (!gpio_get_value(IMX_GPIO_NR(1, 22)))
51 		rev |= BOARD_REV_2_0 << BOARD_VER_OFFSET;
52 	return rev;
53 }
54 
55 #define UART_PAD_CTRL	(PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | PAD_CTL_DSE_HIGH)
56 
57 static void setup_iomux_uart(void)
58 {
59 	static const iomux_v3_cfg_t uart_pads[] = {
60 		MX51_PAD_UART1_RXD__UART1_RXD,
61 		MX51_PAD_UART1_TXD__UART1_TXD,
62 		NEW_PAD_CTRL(MX51_PAD_UART1_RTS__UART1_RTS, UART_PAD_CTRL),
63 		NEW_PAD_CTRL(MX51_PAD_UART1_CTS__UART1_CTS, UART_PAD_CTRL),
64 	};
65 
66 	imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
67 }
68 
69 static void setup_iomux_fec(void)
70 {
71 	static const iomux_v3_cfg_t fec_pads[] = {
72 		NEW_PAD_CTRL(MX51_PAD_EIM_EB2__FEC_MDIO,
73 				PAD_CTL_HYS |
74 				PAD_CTL_PUS_22K_UP |
75 				PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST),
76 		MX51_PAD_EIM_EB3__FEC_RDATA1,
77 		NEW_PAD_CTRL(MX51_PAD_EIM_CS2__FEC_RDATA2, PAD_CTL_HYS),
78 		MX51_PAD_EIM_CS3__FEC_RDATA3,
79 		MX51_PAD_NANDF_CS2__FEC_TX_ER,
80 		MX51_PAD_EIM_CS5__FEC_CRS,
81 		MX51_PAD_EIM_CS4__FEC_RX_ER,
82 		/* PAD used on TS4800 */
83 		MX51_PAD_DI2_PIN2__FEC_MDC,
84 		MX51_PAD_DISP2_DAT14__FEC_RDAT0,
85 		MX51_PAD_DISP2_DAT10__FEC_COL,
86 		MX51_PAD_DISP2_DAT11__FEC_RXCLK,
87 		MX51_PAD_DISP2_DAT15__FEC_TDAT0,
88 		MX51_PAD_DISP2_DAT6__FEC_TDAT1,
89 		MX51_PAD_DISP2_DAT7__FEC_TDAT2,
90 		MX51_PAD_DISP2_DAT8__FEC_TDAT3,
91 		MX51_PAD_DISP2_DAT9__FEC_TX_EN,
92 		MX51_PAD_DISP2_DAT13__FEC_TX_CLK,
93 		MX51_PAD_DISP2_DAT12__FEC_RX_DV,
94 	};
95 
96 	imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
97 }
98 
99 #ifdef CONFIG_FSL_ESDHC
100 int board_mmc_getcd(struct mmc *mmc)
101 {
102 	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
103 	int ret;
104 
105 	imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_GPIO1_0__GPIO1_0,
106 						NO_PAD_CTRL));
107 	gpio_direction_input(IMX_GPIO_NR(1, 0));
108 	imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_GPIO1_6__GPIO1_6,
109 						NO_PAD_CTRL));
110 	gpio_direction_input(IMX_GPIO_NR(1, 6));
111 
112 	if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
113 		ret = !gpio_get_value(IMX_GPIO_NR(1, 0));
114 	else
115 		ret = !gpio_get_value(IMX_GPIO_NR(1, 6));
116 
117 	return ret;
118 }
119 
120 int board_mmc_init(bd_t *bis)
121 {
122 	static const iomux_v3_cfg_t sd1_pads[] = {
123 		NEW_PAD_CTRL(MX51_PAD_SD1_CMD__SD1_CMD, PAD_CTL_DSE_MAX |
124 			PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST),
125 		NEW_PAD_CTRL(MX51_PAD_SD1_CLK__SD1_CLK, PAD_CTL_DSE_MAX |
126 			PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST),
127 		NEW_PAD_CTRL(MX51_PAD_SD1_DATA0__SD1_DATA0, PAD_CTL_DSE_MAX |
128 			PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST),
129 		NEW_PAD_CTRL(MX51_PAD_SD1_DATA1__SD1_DATA1, PAD_CTL_DSE_MAX |
130 			PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST),
131 		NEW_PAD_CTRL(MX51_PAD_SD1_DATA2__SD1_DATA2, PAD_CTL_DSE_MAX |
132 			PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST),
133 		NEW_PAD_CTRL(MX51_PAD_SD1_DATA3__SD1_DATA3, PAD_CTL_DSE_MAX |
134 			PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | PAD_CTL_SRE_FAST),
135 		NEW_PAD_CTRL(MX51_PAD_GPIO1_0__SD1_CD, PAD_CTL_HYS),
136 		NEW_PAD_CTRL(MX51_PAD_GPIO1_1__SD1_WP, PAD_CTL_HYS),
137 	};
138 
139 	esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
140 
141 	imx_iomux_v3_setup_multiple_pads(sd1_pads, ARRAY_SIZE(sd1_pads));
142 
143 	return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
144 }
145 #endif
146 
147 int board_early_init_f(void)
148 {
149 	setup_iomux_uart();
150 	setup_iomux_fec();
151 
152 	return 0;
153 }
154 
155 int board_init(void)
156 {
157 	/* address of boot parameters */
158 	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
159 
160 	return 0;
161 }
162 
163 /*
164  * Read the MAC address from FEC's registers PALR PAUR.
165  * User is supposed to configure these registers when MAC address is known
166  * from another source (fuse), but on TS4800, MAC address is not fused and
167  * the bootrom configure these registers on startup.
168  */
169 static int fec_get_mac_from_register(uint32_t base_addr)
170 {
171 	unsigned char ethaddr[6];
172 	u32 reg_mac[2];
173 	int i;
174 
175 	reg_mac[0] = in_be32(base_addr + 0xE4);
176 	reg_mac[1] = in_be32(base_addr + 0xE8);
177 
178 	for(i = 0; i < 6; i++)
179 		ethaddr[i] = (reg_mac[i / 4] >> ((i % 4) * 8)) & 0xFF;
180 
181 	if (is_valid_ethaddr(ethaddr)) {
182 		eth_env_set_enetaddr("ethaddr", ethaddr);
183 		return 0;
184 	}
185 
186 	return -1;
187 }
188 
189 #define TS4800_GPIO_FEC_PHY_RES         IMX_GPIO_NR(2, 14)
190 int board_eth_init(bd_t *bd)
191 {
192 	int dev_id = -1;
193 	int phy_id = 0xFF;
194 	uint32_t addr = IMX_FEC_BASE;
195 
196 	uint32_t base_mii;
197 	struct mii_dev *bus = NULL;
198 	struct phy_device *phydev = NULL;
199 	int ret;
200 
201 	/* reset FEC phy */
202 	imx_iomux_v3_setup_pad(MX51_PAD_EIM_A20__GPIO2_14);
203 	gpio_direction_output(TS4800_GPIO_FEC_PHY_RES, 0);
204 	mdelay(1);
205 	gpio_set_value(TS4800_GPIO_FEC_PHY_RES, 1);
206 	mdelay(1);
207 
208 	base_mii = addr;
209 	debug("eth_init: fec_probe(bd, %i, %i) @ %08x\n", dev_id, phy_id, addr);
210 	bus = fec_get_miibus(base_mii, dev_id);
211 	if (!bus)
212 		return -ENOMEM;
213 
214 	phydev = phy_find_by_mask(bus, phy_id, PHY_INTERFACE_MODE_MII);
215 	if (!phydev) {
216 		free(bus);
217 		return -ENOMEM;
218 	}
219 
220 	if (fec_get_mac_from_register(addr))
221 		printf("eth_init: failed to get MAC address\n");
222 
223 	ret = fec_probe(bd, dev_id, addr, bus, phydev);
224 	if (ret) {
225 		free(phydev);
226 		free(bus);
227 	}
228 
229 	return ret;
230 }
231 
232 /*
233  * Do not overwrite the console
234  * Use always serial for U-Boot console
235  */
236 int overwrite_console(void)
237 {
238 	return 1;
239 }
240 
241 int checkboard(void)
242 {
243 	puts("Board: TS4800\n");
244 
245 	return 0;
246 }
247 
248 void hw_watchdog_reset(void)
249 {
250 	struct ts4800_wtd_regs *wtd = (struct ts4800_wtd_regs *) (TS4800_SYSCON_BASE + 0xE);
251 	/* feed the watchdog for another 10s */
252 	writew(0x2, &wtd->feed);
253 }
254 
255 void hw_watchdog_init(void)
256 {
257 	return;
258 }
259