1 /*
2  * (C) Copyright 2015 Savoir-faire Linux Inc.
3  *
4  * Derived from MX51EVK code by
5  *   Freescale Semiconductor, Inc.
6  *
7  * SPDX-License-Identifier:	GPL-2.0+
8  */
9 
10 #include <common.h>
11 #include <asm/io.h>
12 #include <asm/gpio.h>
13 #include <asm/arch/imx-regs.h>
14 #include <asm/arch/iomux-mx51.h>
15 #include <linux/errno.h>
16 #include <asm/arch/sys_proto.h>
17 #include <asm/arch/crm_regs.h>
18 #include <asm/arch/clock.h>
19 #include <asm/mach-imx/mx5_video.h>
20 #include <mmc.h>
21 #include <fsl_esdhc.h>
22 #include <mc13892.h>
23 
24 #include <malloc.h>
25 #include <netdev.h>
26 #include <phy.h>
27 #include "ts4800.h"
28 
29 DECLARE_GLOBAL_DATA_PTR;
30 
31 #ifdef CONFIG_FSL_ESDHC
32 struct fsl_esdhc_cfg esdhc_cfg[2] = {
33 	{MMC_SDHC1_BASE_ADDR},
34 	{MMC_SDHC2_BASE_ADDR},
35 };
36 #endif
37 
38 int dram_init(void)
39 {
40 	/* dram_init must store complete ramsize in gd->ram_size */
41 	gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
42 				PHYS_SDRAM_1_SIZE);
43 	return 0;
44 }
45 
46 u32 get_board_rev(void)
47 {
48 	u32 rev = get_cpu_rev();
49 	if (!gpio_get_value(IMX_GPIO_NR(1, 22)))
50 		rev |= BOARD_REV_2_0 << BOARD_VER_OFFSET;
51 	return rev;
52 }
53 
54 #define UART_PAD_CTRL	(PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | PAD_CTL_DSE_HIGH)
55 
56 static void setup_iomux_uart(void)
57 {
58 	static const iomux_v3_cfg_t uart_pads[] = {
59 		MX51_PAD_UART1_RXD__UART1_RXD,
60 		MX51_PAD_UART1_TXD__UART1_TXD,
61 		NEW_PAD_CTRL(MX51_PAD_UART1_RTS__UART1_RTS, UART_PAD_CTRL),
62 		NEW_PAD_CTRL(MX51_PAD_UART1_CTS__UART1_CTS, UART_PAD_CTRL),
63 	};
64 
65 	imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
66 }
67 
68 static void setup_iomux_fec(void)
69 {
70 	static const iomux_v3_cfg_t fec_pads[] = {
71 		NEW_PAD_CTRL(MX51_PAD_EIM_EB2__FEC_MDIO,
72 				PAD_CTL_HYS |
73 				PAD_CTL_PUS_22K_UP |
74 				PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST),
75 		MX51_PAD_EIM_EB3__FEC_RDATA1,
76 		NEW_PAD_CTRL(MX51_PAD_EIM_CS2__FEC_RDATA2, PAD_CTL_HYS),
77 		MX51_PAD_EIM_CS3__FEC_RDATA3,
78 		MX51_PAD_NANDF_CS2__FEC_TX_ER,
79 		MX51_PAD_EIM_CS5__FEC_CRS,
80 		MX51_PAD_EIM_CS4__FEC_RX_ER,
81 		/* PAD used on TS4800 */
82 		MX51_PAD_DI2_PIN2__FEC_MDC,
83 		MX51_PAD_DISP2_DAT14__FEC_RDAT0,
84 		MX51_PAD_DISP2_DAT10__FEC_COL,
85 		MX51_PAD_DISP2_DAT11__FEC_RXCLK,
86 		MX51_PAD_DISP2_DAT15__FEC_TDAT0,
87 		MX51_PAD_DISP2_DAT6__FEC_TDAT1,
88 		MX51_PAD_DISP2_DAT7__FEC_TDAT2,
89 		MX51_PAD_DISP2_DAT8__FEC_TDAT3,
90 		MX51_PAD_DISP2_DAT9__FEC_TX_EN,
91 		MX51_PAD_DISP2_DAT13__FEC_TX_CLK,
92 		MX51_PAD_DISP2_DAT12__FEC_RX_DV,
93 	};
94 
95 	imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
96 }
97 
98 #ifdef CONFIG_FSL_ESDHC
99 int board_mmc_getcd(struct mmc *mmc)
100 {
101 	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
102 	int ret;
103 
104 	imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_GPIO1_0__GPIO1_0,
105 						NO_PAD_CTRL));
106 	gpio_direction_input(IMX_GPIO_NR(1, 0));
107 	imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_GPIO1_6__GPIO1_6,
108 						NO_PAD_CTRL));
109 	gpio_direction_input(IMX_GPIO_NR(1, 6));
110 
111 	if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
112 		ret = !gpio_get_value(IMX_GPIO_NR(1, 0));
113 	else
114 		ret = !gpio_get_value(IMX_GPIO_NR(1, 6));
115 
116 	return ret;
117 }
118 
119 int board_mmc_init(bd_t *bis)
120 {
121 	static const iomux_v3_cfg_t sd1_pads[] = {
122 		NEW_PAD_CTRL(MX51_PAD_SD1_CMD__SD1_CMD, PAD_CTL_DSE_MAX |
123 			PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST),
124 		NEW_PAD_CTRL(MX51_PAD_SD1_CLK__SD1_CLK, PAD_CTL_DSE_MAX |
125 			PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST),
126 		NEW_PAD_CTRL(MX51_PAD_SD1_DATA0__SD1_DATA0, PAD_CTL_DSE_MAX |
127 			PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST),
128 		NEW_PAD_CTRL(MX51_PAD_SD1_DATA1__SD1_DATA1, PAD_CTL_DSE_MAX |
129 			PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST),
130 		NEW_PAD_CTRL(MX51_PAD_SD1_DATA2__SD1_DATA2, PAD_CTL_DSE_MAX |
131 			PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST),
132 		NEW_PAD_CTRL(MX51_PAD_SD1_DATA3__SD1_DATA3, PAD_CTL_DSE_MAX |
133 			PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | PAD_CTL_SRE_FAST),
134 		NEW_PAD_CTRL(MX51_PAD_GPIO1_0__SD1_CD, PAD_CTL_HYS),
135 		NEW_PAD_CTRL(MX51_PAD_GPIO1_1__SD1_WP, PAD_CTL_HYS),
136 	};
137 
138 	esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
139 
140 	imx_iomux_v3_setup_multiple_pads(sd1_pads, ARRAY_SIZE(sd1_pads));
141 
142 	return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
143 }
144 #endif
145 
146 int board_early_init_f(void)
147 {
148 	setup_iomux_uart();
149 	setup_iomux_fec();
150 
151 	return 0;
152 }
153 
154 int board_init(void)
155 {
156 	/* address of boot parameters */
157 	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
158 
159 	return 0;
160 }
161 
162 /*
163  * Read the MAC address from FEC's registers PALR PAUR.
164  * User is supposed to configure these registers when MAC address is known
165  * from another source (fuse), but on TS4800, MAC address is not fused and
166  * the bootrom configure these registers on startup.
167  */
168 static int fec_get_mac_from_register(uint32_t base_addr)
169 {
170 	unsigned char ethaddr[6];
171 	u32 reg_mac[2];
172 	int i;
173 
174 	reg_mac[0] = in_be32(base_addr + 0xE4);
175 	reg_mac[1] = in_be32(base_addr + 0xE8);
176 
177 	for(i = 0; i < 6; i++)
178 		ethaddr[i] = (reg_mac[i / 4] >> ((i % 4) * 8)) & 0xFF;
179 
180 	if (is_valid_ethaddr(ethaddr)) {
181 		eth_setenv_enetaddr("ethaddr", ethaddr);
182 		return 0;
183 	}
184 
185 	return -1;
186 }
187 
188 #define TS4800_GPIO_FEC_PHY_RES         IMX_GPIO_NR(2, 14)
189 int board_eth_init(bd_t *bd)
190 {
191 	int dev_id = -1;
192 	int phy_id = 0xFF;
193 	uint32_t addr = IMX_FEC_BASE;
194 
195 	uint32_t base_mii;
196 	struct mii_dev *bus = NULL;
197 	struct phy_device *phydev = NULL;
198 	int ret;
199 
200 	/* reset FEC phy */
201 	imx_iomux_v3_setup_pad(MX51_PAD_EIM_A20__GPIO2_14);
202 	gpio_direction_output(TS4800_GPIO_FEC_PHY_RES, 0);
203 	mdelay(1);
204 	gpio_set_value(TS4800_GPIO_FEC_PHY_RES, 1);
205 	mdelay(1);
206 
207 	base_mii = addr;
208 	debug("eth_init: fec_probe(bd, %i, %i) @ %08x\n", dev_id, phy_id, addr);
209 	bus = fec_get_miibus(base_mii, dev_id);
210 	if (!bus)
211 		return -ENOMEM;
212 
213 	phydev = phy_find_by_mask(bus, phy_id, PHY_INTERFACE_MODE_MII);
214 	if (!phydev) {
215 		free(bus);
216 		return -ENOMEM;
217 	}
218 
219 	if (fec_get_mac_from_register(addr))
220 		printf("eth_init: failed to get MAC address\n");
221 
222 	ret = fec_probe(bd, dev_id, addr, bus, phydev);
223 	if (ret) {
224 		free(phydev);
225 		free(bus);
226 	}
227 
228 	return ret;
229 }
230 
231 /*
232  * Do not overwrite the console
233  * Use always serial for U-Boot console
234  */
235 int overwrite_console(void)
236 {
237 	return 1;
238 }
239 
240 int checkboard(void)
241 {
242 	puts("Board: TS4800\n");
243 
244 	return 0;
245 }
246 
247 void hw_watchdog_reset(void)
248 {
249 	struct ts4800_wtd_regs *wtd = (struct ts4800_wtd_regs *) (TS4800_SYSCON_BASE + 0xE);
250 	/* feed the watchdog for another 10s */
251 	writew(0x2, &wtd->feed);
252 }
253 
254 void hw_watchdog_init(void)
255 {
256 	return;
257 }
258