1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * (C) Copyright 2015 Savoir-faire Linux Inc. 4 * 5 * Derived from MX51EVK code by 6 * Freescale Semiconductor, Inc. 7 */ 8 9 #include <common.h> 10 #include <asm/io.h> 11 #include <asm/gpio.h> 12 #include <asm/arch/imx-regs.h> 13 #include <asm/arch/iomux-mx51.h> 14 #include <linux/errno.h> 15 #include <asm/arch/sys_proto.h> 16 #include <asm/arch/crm_regs.h> 17 #include <asm/arch/clock.h> 18 #include <asm/mach-imx/mx5_video.h> 19 #include <environment.h> 20 #include <mmc.h> 21 #include <input.h> 22 #include <fsl_esdhc.h> 23 #include <mc13892.h> 24 25 #include <malloc.h> 26 #include <netdev.h> 27 #include <phy.h> 28 #include "ts4800.h" 29 30 DECLARE_GLOBAL_DATA_PTR; 31 32 #ifdef CONFIG_FSL_ESDHC 33 struct fsl_esdhc_cfg esdhc_cfg[2] = { 34 {MMC_SDHC1_BASE_ADDR}, 35 {MMC_SDHC2_BASE_ADDR}, 36 }; 37 #endif 38 39 int dram_init(void) 40 { 41 /* dram_init must store complete ramsize in gd->ram_size */ 42 gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, 43 PHYS_SDRAM_1_SIZE); 44 return 0; 45 } 46 47 u32 get_board_rev(void) 48 { 49 u32 rev = get_cpu_rev(); 50 if (!gpio_get_value(IMX_GPIO_NR(1, 22))) 51 rev |= BOARD_REV_2_0 << BOARD_VER_OFFSET; 52 return rev; 53 } 54 55 #define UART_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | PAD_CTL_DSE_HIGH) 56 57 static void setup_iomux_uart(void) 58 { 59 static const iomux_v3_cfg_t uart_pads[] = { 60 MX51_PAD_UART1_RXD__UART1_RXD, 61 MX51_PAD_UART1_TXD__UART1_TXD, 62 NEW_PAD_CTRL(MX51_PAD_UART1_RTS__UART1_RTS, UART_PAD_CTRL), 63 NEW_PAD_CTRL(MX51_PAD_UART1_CTS__UART1_CTS, UART_PAD_CTRL), 64 }; 65 66 imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); 67 } 68 69 static void setup_iomux_fec(void) 70 { 71 static const iomux_v3_cfg_t fec_pads[] = { 72 NEW_PAD_CTRL(MX51_PAD_EIM_EB2__FEC_MDIO, 73 PAD_CTL_HYS | 74 PAD_CTL_PUS_22K_UP | 75 PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST), 76 MX51_PAD_EIM_EB3__FEC_RDATA1, 77 NEW_PAD_CTRL(MX51_PAD_EIM_CS2__FEC_RDATA2, PAD_CTL_HYS), 78 MX51_PAD_EIM_CS3__FEC_RDATA3, 79 MX51_PAD_NANDF_CS2__FEC_TX_ER, 80 MX51_PAD_EIM_CS5__FEC_CRS, 81 MX51_PAD_EIM_CS4__FEC_RX_ER, 82 /* PAD used on TS4800 */ 83 MX51_PAD_DI2_PIN2__FEC_MDC, 84 MX51_PAD_DISP2_DAT14__FEC_RDAT0, 85 MX51_PAD_DISP2_DAT10__FEC_COL, 86 MX51_PAD_DISP2_DAT11__FEC_RXCLK, 87 MX51_PAD_DISP2_DAT15__FEC_TDAT0, 88 MX51_PAD_DISP2_DAT6__FEC_TDAT1, 89 MX51_PAD_DISP2_DAT7__FEC_TDAT2, 90 MX51_PAD_DISP2_DAT8__FEC_TDAT3, 91 MX51_PAD_DISP2_DAT9__FEC_TX_EN, 92 MX51_PAD_DISP2_DAT13__FEC_TX_CLK, 93 MX51_PAD_DISP2_DAT12__FEC_RX_DV, 94 }; 95 96 imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads)); 97 } 98 99 #ifdef CONFIG_FSL_ESDHC 100 int board_mmc_getcd(struct mmc *mmc) 101 { 102 struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; 103 int ret; 104 105 imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_GPIO1_0__GPIO1_0, 106 NO_PAD_CTRL)); 107 gpio_direction_input(IMX_GPIO_NR(1, 0)); 108 imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_GPIO1_6__GPIO1_6, 109 NO_PAD_CTRL)); 110 gpio_direction_input(IMX_GPIO_NR(1, 6)); 111 112 if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) 113 ret = !gpio_get_value(IMX_GPIO_NR(1, 0)); 114 else 115 ret = !gpio_get_value(IMX_GPIO_NR(1, 6)); 116 117 return ret; 118 } 119 120 int board_mmc_init(bd_t *bis) 121 { 122 static const iomux_v3_cfg_t sd1_pads[] = { 123 NEW_PAD_CTRL(MX51_PAD_SD1_CMD__SD1_CMD, PAD_CTL_DSE_MAX | 124 PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST), 125 NEW_PAD_CTRL(MX51_PAD_SD1_CLK__SD1_CLK, PAD_CTL_DSE_MAX | 126 PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST), 127 NEW_PAD_CTRL(MX51_PAD_SD1_DATA0__SD1_DATA0, PAD_CTL_DSE_MAX | 128 PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST), 129 NEW_PAD_CTRL(MX51_PAD_SD1_DATA1__SD1_DATA1, PAD_CTL_DSE_MAX | 130 PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST), 131 NEW_PAD_CTRL(MX51_PAD_SD1_DATA2__SD1_DATA2, PAD_CTL_DSE_MAX | 132 PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST), 133 NEW_PAD_CTRL(MX51_PAD_SD1_DATA3__SD1_DATA3, PAD_CTL_DSE_MAX | 134 PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | PAD_CTL_SRE_FAST), 135 NEW_PAD_CTRL(MX51_PAD_GPIO1_0__SD1_CD, PAD_CTL_HYS), 136 NEW_PAD_CTRL(MX51_PAD_GPIO1_1__SD1_WP, PAD_CTL_HYS), 137 }; 138 139 esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); 140 141 imx_iomux_v3_setup_multiple_pads(sd1_pads, ARRAY_SIZE(sd1_pads)); 142 143 return fsl_esdhc_initialize(bis, &esdhc_cfg[0]); 144 } 145 #endif 146 147 int board_early_init_f(void) 148 { 149 setup_iomux_uart(); 150 setup_iomux_fec(); 151 152 return 0; 153 } 154 155 int board_init(void) 156 { 157 /* address of boot parameters */ 158 gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; 159 160 return 0; 161 } 162 163 /* 164 * Read the MAC address from FEC's registers PALR PAUR. 165 * User is supposed to configure these registers when MAC address is known 166 * from another source (fuse), but on TS4800, MAC address is not fused and 167 * the bootrom configure these registers on startup. 168 */ 169 static int fec_get_mac_from_register(uint32_t base_addr) 170 { 171 unsigned char ethaddr[6]; 172 u32 reg_mac[2]; 173 int i; 174 175 reg_mac[0] = in_be32(base_addr + 0xE4); 176 reg_mac[1] = in_be32(base_addr + 0xE8); 177 178 for(i = 0; i < 6; i++) 179 ethaddr[i] = (reg_mac[i / 4] >> ((i % 4) * 8)) & 0xFF; 180 181 if (is_valid_ethaddr(ethaddr)) { 182 eth_env_set_enetaddr("ethaddr", ethaddr); 183 return 0; 184 } 185 186 return -1; 187 } 188 189 #define TS4800_GPIO_FEC_PHY_RES IMX_GPIO_NR(2, 14) 190 int board_eth_init(bd_t *bd) 191 { 192 int dev_id = -1; 193 int phy_id = 0xFF; 194 uint32_t addr = IMX_FEC_BASE; 195 196 uint32_t base_mii; 197 struct mii_dev *bus = NULL; 198 struct phy_device *phydev = NULL; 199 int ret; 200 201 /* reset FEC phy */ 202 imx_iomux_v3_setup_pad(MX51_PAD_EIM_A20__GPIO2_14); 203 gpio_direction_output(TS4800_GPIO_FEC_PHY_RES, 0); 204 mdelay(1); 205 gpio_set_value(TS4800_GPIO_FEC_PHY_RES, 1); 206 mdelay(1); 207 208 base_mii = addr; 209 debug("eth_init: fec_probe(bd, %i, %i) @ %08x\n", dev_id, phy_id, addr); 210 bus = fec_get_miibus(base_mii, dev_id); 211 if (!bus) 212 return -ENOMEM; 213 214 phydev = phy_find_by_mask(bus, phy_id, PHY_INTERFACE_MODE_MII); 215 if (!phydev) { 216 free(bus); 217 return -ENOMEM; 218 } 219 220 if (fec_get_mac_from_register(addr)) 221 printf("eth_init: failed to get MAC address\n"); 222 223 ret = fec_probe(bd, dev_id, addr, bus, phydev); 224 if (ret) { 225 free(phydev); 226 free(bus); 227 } 228 229 return ret; 230 } 231 232 /* 233 * Do not overwrite the console 234 * Use always serial for U-Boot console 235 */ 236 int overwrite_console(void) 237 { 238 return 1; 239 } 240 241 int checkboard(void) 242 { 243 puts("Board: TS4800\n"); 244 245 return 0; 246 } 247 248 void hw_watchdog_reset(void) 249 { 250 struct ts4800_wtd_regs *wtd = (struct ts4800_wtd_regs *) (TS4800_SYSCON_BASE + 0xE); 251 /* feed the watchdog for another 10s */ 252 writew(0x2, &wtd->feed); 253 } 254 255 void hw_watchdog_init(void) 256 { 257 return; 258 } 259