1 /* 2 * (c) 2011 Graf-Syteco, Matthias Weisser 3 * <weisserm@arcor.de> 4 * 5 * Based on tx25.c: 6 * (C) Copyright 2009 DENX Software Engineering 7 * Author: John Rigby <jrigby@gmail.com> 8 * 9 * Based on imx27lite.c: 10 * Copyright (C) 2008,2009 Eric Jarrige <jorasse@users.sourceforge.net> 11 * Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com> 12 * And: 13 * RedBoot tx25_misc.c Copyright (C) 2009 Red Hat 14 * 15 * This program is free software; you can redistribute it and/or 16 * modify it under the terms of the GNU General Public License as 17 * published by the Free Software Foundation; either version 2 of 18 * the License, or (at your option) any later version. 19 * 20 * This program is distributed in the hope that it will be useful, 21 * but WITHOUT ANY WARRANTY; without even the implied warranty of 22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 23 * GNU General Public License for more details. 24 * 25 * You should have received a copy of the GNU General Public License 26 * along with this program; if not, write to the Free Software 27 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 28 * MA 02111-1307 USA 29 * 30 */ 31 #include <common.h> 32 #include <asm/gpio.h> 33 #include <asm/io.h> 34 #include <asm/arch/imx-regs.h> 35 #include <asm/arch/imx25-pinmux.h> 36 37 DECLARE_GLOBAL_DATA_PTR; 38 39 int board_init() 40 { 41 struct iomuxc_mux_ctl *muxctl; 42 struct iomuxc_pad_ctl *padctl; 43 struct iomuxc_pad_input_select *inputselect; 44 u32 gpio_mux_mode0_sion = MX25_PIN_MUX_MODE(0) | MX25_PIN_MUX_SION; 45 u32 gpio_mux_mode1 = MX25_PIN_MUX_MODE(1); 46 u32 gpio_mux_mode5 = MX25_PIN_MUX_MODE(5); 47 u32 gpio_mux_mode6 = MX25_PIN_MUX_MODE(6); 48 u32 input_select1 = MX25_PAD_INPUT_SELECT_DAISY(1); 49 u32 input_select2 = MX25_PAD_INPUT_SELECT_DAISY(2); 50 51 icache_enable(); 52 53 muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE; 54 padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE; 55 inputselect = (struct iomuxc_pad_input_select *)IMX_IOPADINPUTSEL_BASE; 56 57 /* Setup of core volatage selection pin to run at 1.4V */ 58 writel(gpio_mux_mode5, &muxctl->pad_ext_armclk); /* VCORE GPIO3[15] */ 59 gpio_direction_output(MXC_GPIO_PORT_TO_NUM(3, 15), 1); 60 61 /* Setup of input daisy chains for SD card pins*/ 62 writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_cmd); 63 writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_clk); 64 writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_data0); 65 writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_data1); 66 writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_data2); 67 writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_data3); 68 69 /* Setup of digital output for USB power and OC */ 70 writel(gpio_mux_mode5, &muxctl->pad_csi_d3); /* USB Power GPIO1[28] */ 71 gpio_direction_output(MXC_GPIO_PORT_TO_NUM(1, 28), 1); 72 73 writel(gpio_mux_mode5, &muxctl->pad_csi_d2); /* USB OC GPIO1[27] */ 74 gpio_direction_input(MXC_GPIO_PORT_TO_NUM(1, 18)); 75 76 /* Setup of digital output control pins */ 77 writel(gpio_mux_mode5, &muxctl->pad_csi_d8); /* Ouput 1 Ctrl GPIO1[7] */ 78 writel(gpio_mux_mode5, &muxctl->pad_csi_d7); /* Ouput 2 Ctrl GPIO1[6] */ 79 writel(gpio_mux_mode5, &muxctl->pad_csi_d6); /* Ouput 1 Stat GPIO1[31]*/ 80 writel(gpio_mux_mode5, &muxctl->pad_csi_d5); /* Ouput 2 Stat GPIO1[30]*/ 81 82 writel(0, &padctl->pad_csi_d6); /* Ouput 1 Stat pull up off */ 83 writel(0, &padctl->pad_csi_d5); /* Ouput 2 Stat pull up off */ 84 85 /* Switch both output drivers off */ 86 gpio_direction_output(MXC_GPIO_PORT_TO_NUM(1, 7), 0); 87 gpio_direction_output(MXC_GPIO_PORT_TO_NUM(1, 6), 0); 88 89 /* Setup of key input pin GPIO2[29]*/ 90 writel(gpio_mux_mode5 | MX25_PIN_MUX_SION, &muxctl->pad_kpp_row0); 91 writel(0, &padctl->pad_kpp_row0); /* Key pull up off */ 92 gpio_direction_input(MXC_GPIO_PORT_TO_NUM(2, 29)); 93 94 /* Setup of status LED outputs */ 95 writel(gpio_mux_mode5, &muxctl->pad_csi_d9); /* GPIO4[21] */ 96 writel(gpio_mux_mode5, &muxctl->pad_csi_d4); /* GPIO1[29] */ 97 98 /* Switch both LEDs off */ 99 gpio_direction_output(MXC_GPIO_PORT_TO_NUM(4, 21), 0); 100 gpio_direction_output(MXC_GPIO_PORT_TO_NUM(1, 29), 0); 101 102 /* Setup of CAN1 and CAN2 signals */ 103 writel(gpio_mux_mode6, &muxctl->pad_gpio_a); /* CAN1 TX */ 104 writel(gpio_mux_mode6, &muxctl->pad_gpio_b); /* CAN1 RX */ 105 writel(gpio_mux_mode6, &muxctl->pad_gpio_c); /* CAN2 TX */ 106 writel(gpio_mux_mode6, &muxctl->pad_gpio_d); /* CAN2 RX */ 107 108 /* Setup of input daisy chains for CAN signals*/ 109 writel(input_select1, &inputselect->can1_ipp_ind_canrx); /* CAN1 RX */ 110 writel(input_select1, &inputselect->can2_ipp_ind_canrx); /* CAN2 RX */ 111 112 /* Setup of I2C3 signals */ 113 writel(gpio_mux_mode1, &muxctl->pad_cspi1_ss1); /* I2C3 SDA */ 114 writel(gpio_mux_mode1, &muxctl->pad_gpio_e); /* I2C3 SCL */ 115 116 /* Setup of input daisy chains for I2C3 signals*/ 117 writel(input_select1, &inputselect->i2c3_ipp_sda_in); /* I2C3 SDA */ 118 writel(input_select2, &inputselect->i2c3_ipp_scl_in); /* I2C3 SCL */ 119 120 gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; 121 122 return 0; 123 } 124 125 int board_late_init(void) 126 { 127 const char *e; 128 129 #ifdef CONFIG_FEC_MXC 130 struct iomuxc_mux_ctl *muxctl; 131 struct iomuxc_pad_ctl *padctl; 132 u32 gpio_mux_mode2 = MX25_PIN_MUX_MODE(2); 133 u32 gpio_mux_mode5 = MX25_PIN_MUX_MODE(5); 134 135 /* 136 * fec pin init is generic 137 */ 138 mx25_fec_init_pins(); 139 140 /* 141 * Set up LAN-RESET and FEC_RX_ERR 142 * 143 * LAN-RESET: GPIO3[16] is ALT 5 mode of pin U20 144 * FEC_RX_ERR: FEC_RX_ERR is ALT 2 mode of pin R2 145 */ 146 muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE; 147 padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE; 148 149 writel(gpio_mux_mode5, &muxctl->pad_upll_bypclk); 150 writel(gpio_mux_mode2, &muxctl->pad_uart2_cts); 151 152 /* assert PHY reset (low) */ 153 gpio_direction_output(MXC_GPIO_PORT_TO_NUM(3, 16), 0); 154 155 udelay(5000); 156 157 /* deassert PHY reset */ 158 gpio_set_value(MXC_GPIO_PORT_TO_NUM(3, 16), 1); 159 160 udelay(5000); 161 #endif 162 163 e = getenv("gs_base_board"); 164 if (e != NULL) { 165 if (strcmp(e, "G283") == 0) { 166 int key = gpio_get_value(MXC_GPIO_PORT_TO_NUM(2, 29)); 167 168 if (key) { 169 /* Switch on both LEDs to inidcate boot mode */ 170 gpio_set_value(MXC_GPIO_PORT_TO_NUM(1, 29), 0); 171 gpio_set_value(MXC_GPIO_PORT_TO_NUM(4, 21), 0); 172 173 setenv("preboot", "run gs_slow_boot"); 174 } else 175 setenv("preboot", "run gs_fast_boot"); 176 } 177 } 178 179 return 0; 180 } 181 182 int dram_init(void) 183 { 184 /* dram_init must store complete ramsize in gd->ram_size */ 185 gd->ram_size = get_ram_size((void *)PHYS_SDRAM, 186 PHYS_SDRAM_SIZE); 187 return 0; 188 } 189