1 /* 2 * Copyright (C) 2015 Freescale Semiconductor, Inc. 3 * 4 * Author: Fabio Estevam <fabio.estevam@freescale.com> 5 * 6 * Copyright (C) 2013 Jon Nettleton <jon.nettleton@gmail.com> 7 * 8 * Based on SPL code from Solidrun tree, which is: 9 * Author: Tungyi Lin <tungyilin1127@gmail.com> 10 * 11 * Derived from EDM_CF_IMX6 code by TechNexion,Inc 12 * Ported to SolidRun microSOM by Rabeeh Khoury <rabeeh@solid-run.com> 13 * 14 * SPDX-License-Identifier: GPL-2.0+ 15 */ 16 17 #include <asm/arch/clock.h> 18 #include <asm/arch/imx-regs.h> 19 #include <asm/arch/iomux.h> 20 #include <asm/arch/mx6-pins.h> 21 #include <asm/arch/mxc_hdmi.h> 22 #include <linux/errno.h> 23 #include <asm/gpio.h> 24 #include <asm/imx-common/iomux-v3.h> 25 #include <asm/imx-common/video.h> 26 #include <mmc.h> 27 #include <fsl_esdhc.h> 28 #include <malloc.h> 29 #include <miiphy.h> 30 #include <netdev.h> 31 #include <asm/arch/crm_regs.h> 32 #include <asm/io.h> 33 #include <asm/arch/sys_proto.h> 34 #include <spl.h> 35 #include <usb.h> 36 #include <usb/ehci-ci.h> 37 38 DECLARE_GLOBAL_DATA_PTR; 39 40 #define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ 41 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ 42 PAD_CTL_SRE_FAST | PAD_CTL_HYS) 43 44 #define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \ 45 PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \ 46 PAD_CTL_SRE_FAST | PAD_CTL_HYS) 47 48 #define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ 49 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS) 50 51 #define ENET_PAD_CTRL_PD (PAD_CTL_PUS_100K_DOWN | \ 52 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS) 53 54 #define ENET_PAD_CTRL_CLK ((PAD_CTL_PUS_100K_UP & ~PAD_CTL_PKE) | \ 55 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST) 56 57 #define ETH_PHY_RESET IMX_GPIO_NR(4, 15) 58 #define USB_H1_VBUS IMX_GPIO_NR(1, 0) 59 60 int dram_init(void) 61 { 62 gd->ram_size = imx_ddr_size(); 63 return 0; 64 } 65 66 static iomux_v3_cfg_t const uart1_pads[] = { 67 IOMUX_PADS(PAD_CSI0_DAT10__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), 68 IOMUX_PADS(PAD_CSI0_DAT11__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), 69 }; 70 71 static iomux_v3_cfg_t const usdhc2_pads[] = { 72 IOMUX_PADS(PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 73 IOMUX_PADS(PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 74 IOMUX_PADS(PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 75 IOMUX_PADS(PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 76 IOMUX_PADS(PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 77 IOMUX_PADS(PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), 78 }; 79 80 static iomux_v3_cfg_t const hb_cbi_sense[] = { 81 /* These pins are for sensing if it is a CuBox-i or a HummingBoard */ 82 IOMUX_PADS(PAD_KEY_ROW1__GPIO4_IO09 | MUX_PAD_CTRL(UART_PAD_CTRL)), 83 IOMUX_PADS(PAD_EIM_DA4__GPIO3_IO04 | MUX_PAD_CTRL(UART_PAD_CTRL)), 84 }; 85 86 static iomux_v3_cfg_t const usb_pads[] = { 87 IOMUX_PADS(PAD_GPIO_0__GPIO1_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL)), 88 }; 89 90 static void setup_iomux_uart(void) 91 { 92 SETUP_IOMUX_PADS(uart1_pads); 93 } 94 95 static struct fsl_esdhc_cfg usdhc_cfg[1] = { 96 {USDHC2_BASE_ADDR}, 97 }; 98 99 int board_mmc_getcd(struct mmc *mmc) 100 { 101 return 1; /* uSDHC2 is always present */ 102 } 103 104 int board_mmc_init(bd_t *bis) 105 { 106 SETUP_IOMUX_PADS(usdhc2_pads); 107 usdhc_cfg[0].esdhc_base = USDHC2_BASE_ADDR; 108 usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); 109 gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk; 110 111 return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); 112 } 113 114 static iomux_v3_cfg_t const enet_pads[] = { 115 IOMUX_PADS(PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL)), 116 IOMUX_PADS(PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL)), 117 /* AR8035 reset */ 118 IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD)), 119 /* AR8035 interrupt */ 120 IOMUX_PADS(PAD_DI0_PIN2__GPIO4_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL)), 121 /* GPIO16 -> AR8035 25MHz */ 122 IOMUX_PADS(PAD_GPIO_16__ENET_REF_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)), 123 IOMUX_PADS(PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(NO_PAD_CTRL)), 124 IOMUX_PADS(PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)), 125 IOMUX_PADS(PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)), 126 IOMUX_PADS(PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)), 127 IOMUX_PADS(PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)), 128 IOMUX_PADS(PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL)), 129 /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */ 130 IOMUX_PADS(PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL_CLK)), 131 IOMUX_PADS(PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL)), 132 IOMUX_PADS(PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD)), 133 IOMUX_PADS(PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD)), 134 IOMUX_PADS(PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)), 135 IOMUX_PADS(PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)), 136 IOMUX_PADS(PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL_PD)), 137 IOMUX_PADS(PAD_ENET_RXD0__GPIO1_IO27 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD)), 138 IOMUX_PADS(PAD_ENET_RXD1__GPIO1_IO26 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD)), 139 }; 140 141 static void setup_iomux_enet(void) 142 { 143 SETUP_IOMUX_PADS(enet_pads); 144 145 gpio_direction_output(ETH_PHY_RESET, 0); 146 mdelay(10); 147 gpio_set_value(ETH_PHY_RESET, 1); 148 udelay(100); 149 } 150 151 int board_phy_config(struct phy_device *phydev) 152 { 153 if (phydev->drv->config) 154 phydev->drv->config(phydev); 155 156 return 0; 157 } 158 159 /* On Cuboxi Ethernet PHY can be located at addresses 0x0 or 0x4 */ 160 #define ETH_PHY_MASK ((1 << 0x0) | (1 << 0x4)) 161 162 int board_eth_init(bd_t *bis) 163 { 164 struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; 165 struct mii_dev *bus; 166 struct phy_device *phydev; 167 168 int ret = enable_fec_anatop_clock(0, ENET_25MHZ); 169 if (ret) 170 return ret; 171 172 /* set gpr1[ENET_CLK_SEL] */ 173 setbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_ENET_CLK_SEL_MASK); 174 175 setup_iomux_enet(); 176 177 bus = fec_get_miibus(IMX_FEC_BASE, -1); 178 if (!bus) 179 return -EINVAL; 180 181 phydev = phy_find_by_mask(bus, ETH_PHY_MASK, PHY_INTERFACE_MODE_RGMII); 182 if (!phydev) { 183 ret = -EINVAL; 184 goto free_bus; 185 } 186 187 debug("using phy at address %d\n", phydev->addr); 188 ret = fec_probe(bis, -1, IMX_FEC_BASE, bus, phydev); 189 if (ret) 190 goto free_phydev; 191 192 return 0; 193 194 free_phydev: 195 free(phydev); 196 free_bus: 197 free(bus); 198 return ret; 199 } 200 201 #ifdef CONFIG_VIDEO_IPUV3 202 static void do_enable_hdmi(struct display_info_t const *dev) 203 { 204 imx_enable_hdmi_phy(); 205 } 206 207 struct display_info_t const displays[] = { 208 { 209 .bus = -1, 210 .addr = 0, 211 .pixfmt = IPU_PIX_FMT_RGB24, 212 .detect = detect_hdmi, 213 .enable = do_enable_hdmi, 214 .mode = { 215 .name = "HDMI", 216 /* 1024x768@60Hz (VESA)*/ 217 .refresh = 60, 218 .xres = 1024, 219 .yres = 768, 220 .pixclock = 15384, 221 .left_margin = 160, 222 .right_margin = 24, 223 .upper_margin = 29, 224 .lower_margin = 3, 225 .hsync_len = 136, 226 .vsync_len = 6, 227 .sync = FB_SYNC_EXT, 228 .vmode = FB_VMODE_NONINTERLACED 229 } 230 } 231 }; 232 233 size_t display_count = ARRAY_SIZE(displays); 234 235 static int setup_display(void) 236 { 237 struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; 238 int reg; 239 int timeout = 100000; 240 241 enable_ipu_clock(); 242 imx_setup_hdmi(); 243 244 /* set video pll to 455MHz (24MHz * (37+11/12) / 2) */ 245 setbits_le32(&ccm->analog_pll_video, BM_ANADIG_PLL_VIDEO_POWERDOWN); 246 247 reg = readl(&ccm->analog_pll_video); 248 reg &= ~BM_ANADIG_PLL_VIDEO_DIV_SELECT; 249 reg |= BF_ANADIG_PLL_VIDEO_DIV_SELECT(37); 250 reg &= ~BM_ANADIG_PLL_VIDEO_POST_DIV_SELECT; 251 reg |= BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(1); 252 writel(reg, &ccm->analog_pll_video); 253 254 writel(BF_ANADIG_PLL_VIDEO_NUM_A(11), &ccm->analog_pll_video_num); 255 writel(BF_ANADIG_PLL_VIDEO_DENOM_B(12), &ccm->analog_pll_video_denom); 256 257 reg &= ~BM_ANADIG_PLL_VIDEO_POWERDOWN; 258 writel(reg, &ccm->analog_pll_video); 259 260 while (timeout--) 261 if (readl(&ccm->analog_pll_video) & BM_ANADIG_PLL_VIDEO_LOCK) 262 break; 263 if (timeout < 0) { 264 printf("Warning: video pll lock timeout!\n"); 265 return -ETIMEDOUT; 266 } 267 268 reg = readl(&ccm->analog_pll_video); 269 reg |= BM_ANADIG_PLL_VIDEO_ENABLE; 270 reg &= ~BM_ANADIG_PLL_VIDEO_BYPASS; 271 writel(reg, &ccm->analog_pll_video); 272 273 /* gate ipu1_di0_clk */ 274 clrbits_le32(&ccm->CCGR3, MXC_CCM_CCGR3_LDB_DI0_MASK); 275 276 /* select video_pll clock / 7 for ipu1_di0_clk -> 65MHz pixclock */ 277 reg = readl(&ccm->chsccdr); 278 reg &= ~(MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_MASK | 279 MXC_CCM_CHSCCDR_IPU1_DI0_PODF_MASK | 280 MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK); 281 reg |= (2 << MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_OFFSET) | 282 (6 << MXC_CCM_CHSCCDR_IPU1_DI0_PODF_OFFSET) | 283 (0 << MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET); 284 writel(reg, &ccm->chsccdr); 285 286 /* enable ipu1_di0_clk */ 287 setbits_le32(&ccm->CCGR3, MXC_CCM_CCGR3_LDB_DI0_MASK); 288 289 return 0; 290 } 291 #endif /* CONFIG_VIDEO_IPUV3 */ 292 293 #ifdef CONFIG_USB_EHCI_MX6 294 static void setup_usb(void) 295 { 296 SETUP_IOMUX_PADS(usb_pads); 297 } 298 299 int board_ehci_hcd_init(int port) 300 { 301 if (port == 1) 302 gpio_direction_output(USB_H1_VBUS, 1); 303 304 return 0; 305 } 306 #endif 307 308 int board_early_init_f(void) 309 { 310 int ret = 0; 311 setup_iomux_uart(); 312 313 #ifdef CONFIG_VIDEO_IPUV3 314 ret = setup_display(); 315 #endif 316 317 #ifdef CONFIG_USB_EHCI_MX6 318 setup_usb(); 319 #endif 320 return ret; 321 } 322 323 int board_init(void) 324 { 325 /* address of boot parameters */ 326 gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; 327 328 return 0; 329 } 330 331 static bool is_hummingboard(void) 332 { 333 int val1, val2; 334 335 SETUP_IOMUX_PADS(hb_cbi_sense); 336 337 gpio_direction_input(IMX_GPIO_NR(4, 9)); 338 gpio_direction_input(IMX_GPIO_NR(3, 4)); 339 340 val1 = gpio_get_value(IMX_GPIO_NR(4, 9)); 341 val2 = gpio_get_value(IMX_GPIO_NR(3, 4)); 342 343 /* 344 * Machine selection - 345 * Machine val1, val2 346 * ------------------------- 347 * HB rev 3.x x 0 348 * CBi 0 1 349 * HB 1 1 350 */ 351 352 if (val2 == 0) 353 return true; 354 else if (val1 == 0) 355 return false; 356 else 357 return true; 358 } 359 360 int checkboard(void) 361 { 362 if (is_hummingboard()) 363 puts("Board: MX6 Hummingboard\n"); 364 else 365 puts("Board: MX6 Cubox-i\n"); 366 367 return 0; 368 } 369 370 int board_late_init(void) 371 { 372 #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG 373 if (is_hummingboard()) 374 setenv("board_name", "HUMMINGBOARD"); 375 else 376 setenv("board_name", "CUBOXI"); 377 378 if (is_mx6dq()) 379 setenv("board_rev", "MX6Q"); 380 else 381 setenv("board_rev", "MX6DL"); 382 #endif 383 384 return 0; 385 } 386 387 #ifdef CONFIG_SPL_BUILD 388 #include <asm/arch/mx6-ddr.h> 389 static const struct mx6dq_iomux_ddr_regs mx6q_ddr_ioregs = { 390 .dram_sdclk_0 = 0x00020030, 391 .dram_sdclk_1 = 0x00020030, 392 .dram_cas = 0x00020030, 393 .dram_ras = 0x00020030, 394 .dram_reset = 0x00020030, 395 .dram_sdcke0 = 0x00003000, 396 .dram_sdcke1 = 0x00003000, 397 .dram_sdba2 = 0x00000000, 398 .dram_sdodt0 = 0x00003030, 399 .dram_sdodt1 = 0x00003030, 400 .dram_sdqs0 = 0x00000030, 401 .dram_sdqs1 = 0x00000030, 402 .dram_sdqs2 = 0x00000030, 403 .dram_sdqs3 = 0x00000030, 404 .dram_sdqs4 = 0x00000030, 405 .dram_sdqs5 = 0x00000030, 406 .dram_sdqs6 = 0x00000030, 407 .dram_sdqs7 = 0x00000030, 408 .dram_dqm0 = 0x00020030, 409 .dram_dqm1 = 0x00020030, 410 .dram_dqm2 = 0x00020030, 411 .dram_dqm3 = 0x00020030, 412 .dram_dqm4 = 0x00020030, 413 .dram_dqm5 = 0x00020030, 414 .dram_dqm6 = 0x00020030, 415 .dram_dqm7 = 0x00020030, 416 }; 417 418 static const struct mx6sdl_iomux_ddr_regs mx6dl_ddr_ioregs = { 419 .dram_sdclk_0 = 0x00000028, 420 .dram_sdclk_1 = 0x00000028, 421 .dram_cas = 0x00000028, 422 .dram_ras = 0x00000028, 423 .dram_reset = 0x000c0028, 424 .dram_sdcke0 = 0x00003000, 425 .dram_sdcke1 = 0x00003000, 426 .dram_sdba2 = 0x00000000, 427 .dram_sdodt0 = 0x00003030, 428 .dram_sdodt1 = 0x00003030, 429 .dram_sdqs0 = 0x00000028, 430 .dram_sdqs1 = 0x00000028, 431 .dram_sdqs2 = 0x00000028, 432 .dram_sdqs3 = 0x00000028, 433 .dram_sdqs4 = 0x00000028, 434 .dram_sdqs5 = 0x00000028, 435 .dram_sdqs6 = 0x00000028, 436 .dram_sdqs7 = 0x00000028, 437 .dram_dqm0 = 0x00000028, 438 .dram_dqm1 = 0x00000028, 439 .dram_dqm2 = 0x00000028, 440 .dram_dqm3 = 0x00000028, 441 .dram_dqm4 = 0x00000028, 442 .dram_dqm5 = 0x00000028, 443 .dram_dqm6 = 0x00000028, 444 .dram_dqm7 = 0x00000028, 445 }; 446 447 static const struct mx6dq_iomux_grp_regs mx6q_grp_ioregs = { 448 .grp_ddr_type = 0x000C0000, 449 .grp_ddrmode_ctl = 0x00020000, 450 .grp_ddrpke = 0x00000000, 451 .grp_addds = 0x00000030, 452 .grp_ctlds = 0x00000030, 453 .grp_ddrmode = 0x00020000, 454 .grp_b0ds = 0x00000030, 455 .grp_b1ds = 0x00000030, 456 .grp_b2ds = 0x00000030, 457 .grp_b3ds = 0x00000030, 458 .grp_b4ds = 0x00000030, 459 .grp_b5ds = 0x00000030, 460 .grp_b6ds = 0x00000030, 461 .grp_b7ds = 0x00000030, 462 }; 463 464 static const struct mx6sdl_iomux_grp_regs mx6sdl_grp_ioregs = { 465 .grp_ddr_type = 0x000c0000, 466 .grp_ddrmode_ctl = 0x00020000, 467 .grp_ddrpke = 0x00000000, 468 .grp_addds = 0x00000028, 469 .grp_ctlds = 0x00000028, 470 .grp_ddrmode = 0x00020000, 471 .grp_b0ds = 0x00000028, 472 .grp_b1ds = 0x00000028, 473 .grp_b2ds = 0x00000028, 474 .grp_b3ds = 0x00000028, 475 .grp_b4ds = 0x00000028, 476 .grp_b5ds = 0x00000028, 477 .grp_b6ds = 0x00000028, 478 .grp_b7ds = 0x00000028, 479 }; 480 481 /* microSOM with Dual processor and 1GB memory */ 482 static const struct mx6_mmdc_calibration mx6q_1g_mmcd_calib = { 483 .p0_mpwldectrl0 = 0x00000000, 484 .p0_mpwldectrl1 = 0x00000000, 485 .p1_mpwldectrl0 = 0x00000000, 486 .p1_mpwldectrl1 = 0x00000000, 487 .p0_mpdgctrl0 = 0x0314031c, 488 .p0_mpdgctrl1 = 0x023e0304, 489 .p1_mpdgctrl0 = 0x03240330, 490 .p1_mpdgctrl1 = 0x03180260, 491 .p0_mprddlctl = 0x3630323c, 492 .p1_mprddlctl = 0x3436283a, 493 .p0_mpwrdlctl = 0x36344038, 494 .p1_mpwrdlctl = 0x422a423c, 495 }; 496 497 /* microSOM with Quad processor and 2GB memory */ 498 static const struct mx6_mmdc_calibration mx6q_2g_mmcd_calib = { 499 .p0_mpwldectrl0 = 0x00000000, 500 .p0_mpwldectrl1 = 0x00000000, 501 .p1_mpwldectrl0 = 0x00000000, 502 .p1_mpwldectrl1 = 0x00000000, 503 .p0_mpdgctrl0 = 0x0314031c, 504 .p0_mpdgctrl1 = 0x023e0304, 505 .p1_mpdgctrl0 = 0x03240330, 506 .p1_mpdgctrl1 = 0x03180260, 507 .p0_mprddlctl = 0x3630323c, 508 .p1_mprddlctl = 0x3436283a, 509 .p0_mpwrdlctl = 0x36344038, 510 .p1_mpwrdlctl = 0x422a423c, 511 }; 512 513 /* microSOM with Solo processor and 512MB memory */ 514 static const struct mx6_mmdc_calibration mx6dl_512m_mmcd_calib = { 515 .p0_mpwldectrl0 = 0x0045004D, 516 .p0_mpwldectrl1 = 0x003A0047, 517 .p0_mpdgctrl0 = 0x023C0224, 518 .p0_mpdgctrl1 = 0x02000220, 519 .p0_mprddlctl = 0x44444846, 520 .p0_mpwrdlctl = 0x32343032, 521 }; 522 523 /* microSOM with Dual lite processor and 1GB memory */ 524 static const struct mx6_mmdc_calibration mx6dl_1g_mmcd_calib = { 525 .p0_mpwldectrl0 = 0x0045004D, 526 .p0_mpwldectrl1 = 0x003A0047, 527 .p1_mpwldectrl0 = 0x001F001F, 528 .p1_mpwldectrl1 = 0x00210035, 529 .p0_mpdgctrl0 = 0x023C0224, 530 .p0_mpdgctrl1 = 0x02000220, 531 .p1_mpdgctrl0 = 0x02200220, 532 .p1_mpdgctrl1 = 0x02040208, 533 .p0_mprddlctl = 0x44444846, 534 .p1_mprddlctl = 0x4042463C, 535 .p0_mpwrdlctl = 0x32343032, 536 .p1_mpwrdlctl = 0x36363430, 537 }; 538 539 static struct mx6_ddr3_cfg mem_ddr_2g = { 540 .mem_speed = 1600, 541 .density = 2, 542 .width = 16, 543 .banks = 8, 544 .rowaddr = 14, 545 .coladdr = 10, 546 .pagesz = 2, 547 .trcd = 1375, 548 .trcmin = 4875, 549 .trasmin = 3500, 550 .SRT = 1, 551 }; 552 553 static struct mx6_ddr3_cfg mem_ddr_4g = { 554 .mem_speed = 1600, 555 .density = 4, 556 .width = 16, 557 .banks = 8, 558 .rowaddr = 15, 559 .coladdr = 10, 560 .pagesz = 2, 561 .trcd = 1375, 562 .trcmin = 4875, 563 .trasmin = 3500, 564 }; 565 566 static void ccgr_init(void) 567 { 568 struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; 569 570 writel(0x00C03F3F, &ccm->CCGR0); 571 writel(0x0030FC03, &ccm->CCGR1); 572 writel(0x0FFFC000, &ccm->CCGR2); 573 writel(0x3FF00000, &ccm->CCGR3); 574 writel(0x00FFF300, &ccm->CCGR4); 575 writel(0x0F0000C3, &ccm->CCGR5); 576 writel(0x000003FF, &ccm->CCGR6); 577 } 578 579 static void gpr_init(void) 580 { 581 struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; 582 583 /* enable AXI cache for VDOA/VPU/IPU */ 584 writel(0xF00000CF, &iomux->gpr[4]); 585 /* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ 586 writel(0x007F007F, &iomux->gpr[6]); 587 writel(0x007F007F, &iomux->gpr[7]); 588 } 589 590 static void spl_dram_init(int width) 591 { 592 struct mx6_ddr_sysinfo sysinfo = { 593 /* width of data bus: 0=16, 1=32, 2=64 */ 594 .dsize = width / 32, 595 /* config for full 4GB range so that get_mem_size() works */ 596 .cs_density = 32, /* 32Gb per CS */ 597 .ncs = 1, /* single chip select */ 598 .cs1_mirror = 0, 599 .rtt_wr = 1 /*DDR3_RTT_60_OHM*/, /* RTT_Wr = RZQ/4 */ 600 .rtt_nom = 1 /*DDR3_RTT_60_OHM*/, /* RTT_Nom = RZQ/4 */ 601 .walat = 1, /* Write additional latency */ 602 .ralat = 5, /* Read additional latency */ 603 .mif3_mode = 3, /* Command prediction working mode */ 604 .bi_on = 1, /* Bank interleaving enabled */ 605 .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */ 606 .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */ 607 .ddr_type = DDR_TYPE_DDR3, 608 .refsel = 1, /* Refresh cycles at 32KHz */ 609 .refr = 7, /* 8 refresh commands per refresh cycle */ 610 }; 611 612 if (is_mx6dq()) 613 mx6dq_dram_iocfg(width, &mx6q_ddr_ioregs, &mx6q_grp_ioregs); 614 else 615 mx6sdl_dram_iocfg(width, &mx6dl_ddr_ioregs, &mx6sdl_grp_ioregs); 616 617 if (is_cpu_type(MXC_CPU_MX6D)) 618 mx6_dram_cfg(&sysinfo, &mx6q_1g_mmcd_calib, &mem_ddr_2g); 619 else if (is_cpu_type(MXC_CPU_MX6Q)) 620 mx6_dram_cfg(&sysinfo, &mx6q_2g_mmcd_calib, &mem_ddr_4g); 621 else if (is_cpu_type(MXC_CPU_MX6DL)) 622 mx6_dram_cfg(&sysinfo, &mx6dl_1g_mmcd_calib, &mem_ddr_2g); 623 else if (is_cpu_type(MXC_CPU_MX6SOLO)) 624 mx6_dram_cfg(&sysinfo, &mx6dl_512m_mmcd_calib, &mem_ddr_2g); 625 } 626 627 void board_init_f(ulong dummy) 628 { 629 /* setup AIPS and disable watchdog */ 630 arch_cpu_init(); 631 632 ccgr_init(); 633 gpr_init(); 634 635 /* iomux and setup of i2c */ 636 board_early_init_f(); 637 638 /* setup GP timer */ 639 timer_init(); 640 641 /* UART clocks enabled and gd valid - init serial console */ 642 preloader_console_init(); 643 644 /* DDR initialization */ 645 if (is_cpu_type(MXC_CPU_MX6SOLO)) 646 spl_dram_init(32); 647 else 648 spl_dram_init(64); 649 650 /* Clear the BSS. */ 651 memset(__bss_start, 0, __bss_end - __bss_start); 652 653 /* load/boot image from boot device */ 654 board_init_r(NULL, 0); 655 } 656 #endif 657