1 /* 2 * Copyright 2008 Freescale Semiconductor, Inc. 3 * 4 * This program is free software; you can redistribute it and/or 5 * modify it under the terms of the GNU General Public License 6 * Version 2 as published by the Free Software Foundation. 7 */ 8 9 #include <common.h> 10 #include <i2c.h> 11 12 #include <asm/fsl_ddr_sdram.h> 13 #include <asm/fsl_ddr_dimm_params.h> 14 15 static void 16 get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) 17 { 18 i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t)); 19 } 20 21 unsigned int fsl_ddr_get_mem_data_rate(void) 22 { 23 return get_ddr_freq(0); 24 } 25 26 void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, 27 unsigned int ctrl_num) 28 { 29 unsigned int i; 30 31 if (ctrl_num) { 32 printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num); 33 return; 34 } 35 36 for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { 37 get_spd(&(ctrl_dimms_spd[i]), SPD_EEPROM_ADDRESS); 38 } 39 } 40 41 void fsl_ddr_board_options(memctl_options_t *popts, 42 dimm_params_t *pdimm, 43 unsigned int ctrl_num) 44 { 45 /* 46 * Factors to consider for clock adjust: 47 * - number of chips on bus 48 * - position of slot 49 * - DDR1 vs. DDR2? 50 * - ??? 51 * 52 * This needs to be determined on a board-by-board basis. 53 * 0110 3/4 cycle late 54 * 0111 7/8 cycle late 55 */ 56 popts->clk_adjust = 7; 57 58 /* 59 * Factors to consider for CPO: 60 * - frequency 61 * - ddr1 vs. ddr2 62 */ 63 popts->cpo_override = 0; 64 65 /* 66 * Factors to consider for write data delay: 67 * - number of DIMMs 68 * 69 * 1 = 1/4 clock delay 70 * 2 = 1/2 clock delay 71 * 3 = 3/4 clock delay 72 * 4 = 1 clock delay 73 * 5 = 5/4 clock delay 74 * 6 = 3/2 clock delay 75 */ 76 popts->write_data_delay = 3; 77 78 /* 79 * Factors to consider for half-strength driver enable: 80 * - number of DIMMs installed 81 */ 82 popts->half_strength_driver_enable = 0; 83 } 84