1 /* 2 * board.h 3 * 4 * (C) Copyright 2013 Siemens Schweiz AG 5 * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. 6 * 7 * Based on: 8 * TI AM335x boards information header 9 * u-boot:/board/ti/am335x/board.h 10 * 11 * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ 12 * 13 * SPDX-License-Identifier: GPL-2.0+ 14 */ 15 16 #ifndef _BOARD_H_ 17 #define _BOARD_H_ 18 19 #define PARGS3(x) settings.ddr3.x-ddr3_default.x, \ 20 settings.ddr3.x, ddr3_default.x 21 #define PRINTARGS(y) printf("%x, %8x, %8x : "#y"\n", PARGS3(y)) 22 #define MAGIC_CHIP 0x50494843 23 24 /* Automatic generated definition */ 25 /* Wed, 16 Apr 2014 16:50:41 +0200 */ 26 /* From file: draco/ddr3-data-universal-default@303MHz-i0-ES3.txt */ 27 struct ddr3_data { 28 unsigned int magic; /* 0x33524444 */ 29 unsigned int version; /* 0x56312e35 */ 30 unsigned short int ddr3_sratio; /* 0x0080 */ 31 unsigned short int iclkout; /* 0x0000 */ 32 unsigned short int dt0rdsratio0; /* 0x003A */ 33 unsigned short int dt0wdsratio0; /* 0x003F */ 34 unsigned short int dt0fwsratio0; /* 0x009F */ 35 unsigned short int dt0wrsratio0; /* 0x0079 */ 36 unsigned int sdram_tim1; /* 0x0888A39B */ 37 unsigned int sdram_tim2; /* 0x26247FDA */ 38 unsigned int sdram_tim3; /* 0x501F821F */ 39 unsigned int emif_ddr_phy_ctlr_1; /* 0x00100206 */ 40 unsigned int sdram_config; /* 0x61A44A32 */ 41 unsigned int ref_ctrl; /* 0x0000093B */ 42 unsigned int ioctr_val; /* 0x0000014A */ 43 char manu_name[32]; /* "default@303MHz \0" */ 44 char manu_marking[32]; /* "default \0" */ 45 }; 46 47 struct chip_data { 48 unsigned int magic; 49 char sdevname[16]; 50 char shwver[7]; 51 }; 52 53 struct draco_baseboard_id { 54 struct ddr3_data ddr3; 55 struct chip_data chip; 56 }; 57 58 /* 59 * We have three pin mux functions that must exist. We must be able to enable 60 * uart0, for initial output and i2c0 to read the main EEPROM. We then have a 61 * main pinmux function that can be overridden to enable all other pinmux that 62 * is required on the board. 63 */ 64 void enable_uart0_pin_mux(void); 65 void enable_uart1_pin_mux(void); 66 void enable_uart2_pin_mux(void); 67 void enable_uart3_pin_mux(void); 68 void enable_uart4_pin_mux(void); 69 void enable_uart5_pin_mux(void); 70 void enable_i2c0_pin_mux(void); 71 void enable_board_pin_mux(void); 72 #endif 73