xref: /openbmc/u-boot/board/sbc8641d/sbc8641d.c (revision fd0bc623)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright 2007 Wind River Systemes, Inc. <www.windriver.com>
4  * Copyright 2007 Embedded Specialties, Inc.
5  * Joe Hamman joe.hamman@embeddedspecialties.com
6  *
7  * Copyright 2004 Freescale Semiconductor.
8  * Jeff Brown
9  * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
10  *
11  * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
12  */
13 
14 #include <common.h>
15 #include <command.h>
16 #include <pci.h>
17 #include <asm/processor.h>
18 #include <asm/immap_86xx.h>
19 #include <asm/fsl_pci.h>
20 #include <fsl_ddr_sdram.h>
21 #include <asm/fsl_serdes.h>
22 #include <linux/libfdt.h>
23 #include <fdt_support.h>
24 
25 DECLARE_GLOBAL_DATA_PTR;
26 
27 long int fixed_sdram (void);
28 
29 int board_early_init_f (void)
30 {
31 	return 0;
32 }
33 
34 int checkboard (void)
35 {
36 	puts ("Board: Wind River SBC8641D\n");
37 
38 	return 0;
39 }
40 
41 int dram_init(void)
42 {
43 	long dram_size = 0;
44 
45 #if defined(CONFIG_SPD_EEPROM)
46 	dram_size = fsl_ddr_sdram();
47 #else
48 	dram_size = fixed_sdram ();
49 #endif
50 
51 	debug ("    DDR: ");
52 	gd->ram_size = dram_size;
53 
54 	return 0;
55 }
56 
57 #if defined(CONFIG_SYS_DRAM_TEST)
58 int testdram (void)
59 {
60 	uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
61 	uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
62 	uint *p;
63 
64 	puts ("SDRAM test phase 1:\n");
65 	for (p = pstart; p < pend; p++)
66 		*p = 0xaaaaaaaa;
67 
68 	for (p = pstart; p < pend; p++) {
69 		if (*p != 0xaaaaaaaa) {
70 			printf ("SDRAM test fails at: %08x\n", (uint) p);
71 			return 1;
72 		}
73 	}
74 
75 	puts ("SDRAM test phase 2:\n");
76 	for (p = pstart; p < pend; p++)
77 		*p = 0x55555555;
78 
79 	for (p = pstart; p < pend; p++) {
80 		if (*p != 0x55555555) {
81 			printf ("SDRAM test fails at: %08x\n", (uint) p);
82 			return 1;
83 		}
84 	}
85 
86 	puts ("SDRAM test passed.\n");
87 	return 0;
88 }
89 #endif
90 
91 #if !defined(CONFIG_SPD_EEPROM)
92 /*
93  * Fixed sdram init -- doesn't use serial presence detect.
94  */
95 long int fixed_sdram (void)
96 {
97 #if !defined(CONFIG_SYS_RAMBOOT)
98 	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
99 	volatile struct ccsr_ddr *ddr = &immap->im_ddr1;
100 
101 	ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
102 	ddr->cs1_bnds = CONFIG_SYS_DDR_CS1_BNDS;
103 	ddr->cs2_bnds = CONFIG_SYS_DDR_CS2_BNDS;
104 	ddr->cs3_bnds = CONFIG_SYS_DDR_CS3_BNDS;
105 	ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
106 	ddr->cs1_config = CONFIG_SYS_DDR_CS1_CONFIG;
107 	ddr->cs2_config = CONFIG_SYS_DDR_CS2_CONFIG;
108 	ddr->cs3_config = CONFIG_SYS_DDR_CS3_CONFIG;
109 	ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
110 	ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
111 	ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
112 	ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
113 	ddr->sdram_cfg = CONFIG_SYS_DDR_CFG_1A;
114 	ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CFG_2;
115 	ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1;
116 	ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2;
117 	ddr->sdram_md_cntl = CONFIG_SYS_DDR_MODE_CTL;
118 	ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
119 	ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT;
120 	ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL;
121 
122 	asm ("sync;isync");
123 
124 	udelay (500);
125 
126 	ddr->sdram_cfg = CONFIG_SYS_DDR_CFG_1B;
127 	asm ("sync; isync");
128 
129 	udelay (500);
130 	ddr = &immap->im_ddr2;
131 
132 	ddr->cs0_bnds = CONFIG_SYS_DDR2_CS0_BNDS;
133 	ddr->cs1_bnds = CONFIG_SYS_DDR2_CS1_BNDS;
134 	ddr->cs2_bnds = CONFIG_SYS_DDR2_CS2_BNDS;
135 	ddr->cs3_bnds = CONFIG_SYS_DDR2_CS3_BNDS;
136 	ddr->cs0_config = CONFIG_SYS_DDR2_CS0_CONFIG;
137 	ddr->cs1_config = CONFIG_SYS_DDR2_CS1_CONFIG;
138 	ddr->cs2_config = CONFIG_SYS_DDR2_CS2_CONFIG;
139 	ddr->cs3_config = CONFIG_SYS_DDR2_CS3_CONFIG;
140 	ddr->timing_cfg_3 = CONFIG_SYS_DDR2_EXT_REFRESH;
141 	ddr->timing_cfg_0 = CONFIG_SYS_DDR2_TIMING_0;
142 	ddr->timing_cfg_1 = CONFIG_SYS_DDR2_TIMING_1;
143 	ddr->timing_cfg_2 = CONFIG_SYS_DDR2_TIMING_2;
144 	ddr->sdram_cfg = CONFIG_SYS_DDR2_CFG_1A;
145 	ddr->sdram_cfg_2 = CONFIG_SYS_DDR2_CFG_2;
146 	ddr->sdram_mode = CONFIG_SYS_DDR2_MODE_1;
147 	ddr->sdram_mode_2 = CONFIG_SYS_DDR2_MODE_2;
148 	ddr->sdram_md_cntl = CONFIG_SYS_DDR2_MODE_CTL;
149 	ddr->sdram_interval = CONFIG_SYS_DDR2_INTERVAL;
150 	ddr->sdram_data_init = CONFIG_SYS_DDR2_DATA_INIT;
151 	ddr->sdram_clk_cntl = CONFIG_SYS_DDR2_CLK_CTRL;
152 
153 	asm ("sync;isync");
154 
155 	udelay (500);
156 
157 	ddr->sdram_cfg = CONFIG_SYS_DDR2_CFG_1B;
158 	asm ("sync; isync");
159 
160 	udelay (500);
161 #endif
162 	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
163 }
164 #endif				/* !defined(CONFIG_SPD_EEPROM) */
165 
166 #if defined(CONFIG_PCI)
167 /*
168  * Initialize PCI Devices, report devices found.
169  */
170 
171 void pci_init_board(void)
172 {
173 	fsl_pcie_init_board(0);
174 }
175 #endif /* CONFIG_PCI */
176 
177 
178 #if defined(CONFIG_OF_BOARD_SETUP)
179 int ft_board_setup(void *blob, bd_t *bd)
180 {
181 	ft_cpu_setup(blob, bd);
182 
183 	FT_FSL_PCI_SETUP;
184 
185 	return 0;
186 }
187 #endif
188 
189 void sbc8641d_reset_board (void)
190 {
191 	puts ("Resetting board....\n");
192 }
193 
194 /*
195  * get_board_sys_clk
196  *      Clock is fixed at 1GHz on this board. Used for CONFIG_SYS_CLK_FREQ
197  */
198 
199 unsigned long get_board_sys_clk (ulong dummy)
200 {
201 	int i;
202 	ulong val = 0;
203 
204 	i = 5;
205 	i &= 0x07;
206 
207 	switch (i) {
208 	case 0:
209 		val = 33000000;
210 		break;
211 	case 1:
212 		val = 40000000;
213 		break;
214 	case 2:
215 		val = 50000000;
216 		break;
217 	case 3:
218 		val = 66000000;
219 		break;
220 	case 4:
221 		val = 83000000;
222 		break;
223 	case 5:
224 		val = 100000000;
225 		break;
226 	case 6:
227 		val = 134000000;
228 		break;
229 	case 7:
230 		val = 166000000;
231 		break;
232 	}
233 
234 	return val;
235 }
236 
237 void board_reset(void)
238 {
239 #ifdef CONFIG_SYS_RESET_ADDRESS
240 	ulong addr = CONFIG_SYS_RESET_ADDRESS;
241 
242 	/* flush and disable I/D cache */
243 	__asm__ __volatile__ ("mfspr	3, 1008"	::: "r3");
244 	__asm__ __volatile__ ("ori	5, 5, 0xcc00"	::: "r5");
245 	__asm__ __volatile__ ("ori	4, 3, 0xc00"	::: "r4");
246 	__asm__ __volatile__ ("andc	5, 3, 5"	::: "r5");
247 	__asm__ __volatile__ ("sync");
248 	__asm__ __volatile__ ("mtspr	1008, 4");
249 	__asm__ __volatile__ ("isync");
250 	__asm__ __volatile__ ("sync");
251 	__asm__ __volatile__ ("mtspr	1008, 5");
252 	__asm__ __volatile__ ("isync");
253 	__asm__ __volatile__ ("sync");
254 
255 	/*
256 	 * SRR0 has system reset vector, SRR1 has default MSR value
257 	 * rfi restores MSR from SRR1 and sets the PC to the SRR0 value
258 	 */
259 	__asm__ __volatile__ ("mtspr	26, %0"		:: "r" (addr));
260 	__asm__ __volatile__ ("li	4, (1 << 6)"	::: "r4");
261 	__asm__ __volatile__ ("mtspr	27, 4");
262 	__asm__ __volatile__ ("rfi");
263 #endif
264 }
265