xref: /openbmc/u-boot/board/sbc8641d/sbc8641d.c (revision 2d2811c2)
1 /*
2  * Copyright 2007 Wind River Systemes, Inc. <www.windriver.com>
3  * Copyright 2007 Embedded Specialties, Inc.
4  * Joe Hamman joe.hamman@embeddedspecialties.com
5  *
6  * Copyright 2004 Freescale Semiconductor.
7  * Jeff Brown
8  * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
9  *
10  * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
11  *
12  * SPDX-License-Identifier:	GPL-2.0+
13  */
14 
15 #include <common.h>
16 #include <command.h>
17 #include <pci.h>
18 #include <asm/processor.h>
19 #include <asm/immap_86xx.h>
20 #include <asm/fsl_pci.h>
21 #include <fsl_ddr_sdram.h>
22 #include <asm/fsl_serdes.h>
23 #include <libfdt.h>
24 #include <fdt_support.h>
25 
26 long int fixed_sdram (void);
27 
28 int board_early_init_f (void)
29 {
30 	return 0;
31 }
32 
33 int checkboard (void)
34 {
35 	puts ("Board: Wind River SBC8641D\n");
36 
37 	return 0;
38 }
39 
40 phys_size_t initdram (int board_type)
41 {
42 	long dram_size = 0;
43 
44 #if defined(CONFIG_SPD_EEPROM)
45 	dram_size = fsl_ddr_sdram();
46 #else
47 	dram_size = fixed_sdram ();
48 #endif
49 
50 	debug ("    DDR: ");
51 	return dram_size;
52 }
53 
54 #if defined(CONFIG_SYS_DRAM_TEST)
55 int testdram (void)
56 {
57 	uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
58 	uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
59 	uint *p;
60 
61 	puts ("SDRAM test phase 1:\n");
62 	for (p = pstart; p < pend; p++)
63 		*p = 0xaaaaaaaa;
64 
65 	for (p = pstart; p < pend; p++) {
66 		if (*p != 0xaaaaaaaa) {
67 			printf ("SDRAM test fails at: %08x\n", (uint) p);
68 			return 1;
69 		}
70 	}
71 
72 	puts ("SDRAM test phase 2:\n");
73 	for (p = pstart; p < pend; p++)
74 		*p = 0x55555555;
75 
76 	for (p = pstart; p < pend; p++) {
77 		if (*p != 0x55555555) {
78 			printf ("SDRAM test fails at: %08x\n", (uint) p);
79 			return 1;
80 		}
81 	}
82 
83 	puts ("SDRAM test passed.\n");
84 	return 0;
85 }
86 #endif
87 
88 #if !defined(CONFIG_SPD_EEPROM)
89 /*
90  * Fixed sdram init -- doesn't use serial presence detect.
91  */
92 long int fixed_sdram (void)
93 {
94 #if !defined(CONFIG_SYS_RAMBOOT)
95 	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
96 	volatile struct ccsr_ddr *ddr = &immap->im_ddr1;
97 
98 	ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
99 	ddr->cs1_bnds = CONFIG_SYS_DDR_CS1_BNDS;
100 	ddr->cs2_bnds = CONFIG_SYS_DDR_CS2_BNDS;
101 	ddr->cs3_bnds = CONFIG_SYS_DDR_CS3_BNDS;
102 	ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
103 	ddr->cs1_config = CONFIG_SYS_DDR_CS1_CONFIG;
104 	ddr->cs2_config = CONFIG_SYS_DDR_CS2_CONFIG;
105 	ddr->cs3_config = CONFIG_SYS_DDR_CS3_CONFIG;
106 	ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
107 	ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
108 	ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
109 	ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
110 	ddr->sdram_cfg = CONFIG_SYS_DDR_CFG_1A;
111 	ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CFG_2;
112 	ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1;
113 	ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2;
114 	ddr->sdram_md_cntl = CONFIG_SYS_DDR_MODE_CTL;
115 	ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
116 	ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT;
117 	ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL;
118 
119 	asm ("sync;isync");
120 
121 	udelay (500);
122 
123 	ddr->sdram_cfg = CONFIG_SYS_DDR_CFG_1B;
124 	asm ("sync; isync");
125 
126 	udelay (500);
127 	ddr = &immap->im_ddr2;
128 
129 	ddr->cs0_bnds = CONFIG_SYS_DDR2_CS0_BNDS;
130 	ddr->cs1_bnds = CONFIG_SYS_DDR2_CS1_BNDS;
131 	ddr->cs2_bnds = CONFIG_SYS_DDR2_CS2_BNDS;
132 	ddr->cs3_bnds = CONFIG_SYS_DDR2_CS3_BNDS;
133 	ddr->cs0_config = CONFIG_SYS_DDR2_CS0_CONFIG;
134 	ddr->cs1_config = CONFIG_SYS_DDR2_CS1_CONFIG;
135 	ddr->cs2_config = CONFIG_SYS_DDR2_CS2_CONFIG;
136 	ddr->cs3_config = CONFIG_SYS_DDR2_CS3_CONFIG;
137 	ddr->timing_cfg_3 = CONFIG_SYS_DDR2_EXT_REFRESH;
138 	ddr->timing_cfg_0 = CONFIG_SYS_DDR2_TIMING_0;
139 	ddr->timing_cfg_1 = CONFIG_SYS_DDR2_TIMING_1;
140 	ddr->timing_cfg_2 = CONFIG_SYS_DDR2_TIMING_2;
141 	ddr->sdram_cfg = CONFIG_SYS_DDR2_CFG_1A;
142 	ddr->sdram_cfg_2 = CONFIG_SYS_DDR2_CFG_2;
143 	ddr->sdram_mode = CONFIG_SYS_DDR2_MODE_1;
144 	ddr->sdram_mode_2 = CONFIG_SYS_DDR2_MODE_2;
145 	ddr->sdram_md_cntl = CONFIG_SYS_DDR2_MODE_CTL;
146 	ddr->sdram_interval = CONFIG_SYS_DDR2_INTERVAL;
147 	ddr->sdram_data_init = CONFIG_SYS_DDR2_DATA_INIT;
148 	ddr->sdram_clk_cntl = CONFIG_SYS_DDR2_CLK_CTRL;
149 
150 	asm ("sync;isync");
151 
152 	udelay (500);
153 
154 	ddr->sdram_cfg = CONFIG_SYS_DDR2_CFG_1B;
155 	asm ("sync; isync");
156 
157 	udelay (500);
158 #endif
159 	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
160 }
161 #endif				/* !defined(CONFIG_SPD_EEPROM) */
162 
163 #if defined(CONFIG_PCI)
164 /*
165  * Initialize PCI Devices, report devices found.
166  */
167 
168 void pci_init_board(void)
169 {
170 	fsl_pcie_init_board(0);
171 }
172 #endif /* CONFIG_PCI */
173 
174 
175 #if defined(CONFIG_OF_BOARD_SETUP)
176 int ft_board_setup(void *blob, bd_t *bd)
177 {
178 	ft_cpu_setup(blob, bd);
179 
180 	FT_FSL_PCI_SETUP;
181 
182 	return 0;
183 }
184 #endif
185 
186 void sbc8641d_reset_board (void)
187 {
188 	puts ("Resetting board....\n");
189 }
190 
191 /*
192  * get_board_sys_clk
193  *      Clock is fixed at 1GHz on this board. Used for CONFIG_SYS_CLK_FREQ
194  */
195 
196 unsigned long get_board_sys_clk (ulong dummy)
197 {
198 	int i;
199 	ulong val = 0;
200 
201 	i = 5;
202 	i &= 0x07;
203 
204 	switch (i) {
205 	case 0:
206 		val = 33000000;
207 		break;
208 	case 1:
209 		val = 40000000;
210 		break;
211 	case 2:
212 		val = 50000000;
213 		break;
214 	case 3:
215 		val = 66000000;
216 		break;
217 	case 4:
218 		val = 83000000;
219 		break;
220 	case 5:
221 		val = 100000000;
222 		break;
223 	case 6:
224 		val = 134000000;
225 		break;
226 	case 7:
227 		val = 166000000;
228 		break;
229 	}
230 
231 	return val;
232 }
233 
234 void board_reset(void)
235 {
236 #ifdef CONFIG_SYS_RESET_ADDRESS
237 	ulong addr = CONFIG_SYS_RESET_ADDRESS;
238 
239 	/* flush and disable I/D cache */
240 	__asm__ __volatile__ ("mfspr	3, 1008"	::: "r3");
241 	__asm__ __volatile__ ("ori	5, 5, 0xcc00"	::: "r5");
242 	__asm__ __volatile__ ("ori	4, 3, 0xc00"	::: "r4");
243 	__asm__ __volatile__ ("andc	5, 3, 5"	::: "r5");
244 	__asm__ __volatile__ ("sync");
245 	__asm__ __volatile__ ("mtspr	1008, 4");
246 	__asm__ __volatile__ ("isync");
247 	__asm__ __volatile__ ("sync");
248 	__asm__ __volatile__ ("mtspr	1008, 5");
249 	__asm__ __volatile__ ("isync");
250 	__asm__ __volatile__ ("sync");
251 
252 	/*
253 	 * SRR0 has system reset vector, SRR1 has default MSR value
254 	 * rfi restores MSR from SRR1 and sets the PC to the SRR0 value
255 	 */
256 	__asm__ __volatile__ ("mtspr	26, %0"		:: "r" (addr));
257 	__asm__ __volatile__ ("li	4, (1 << 6)"	::: "r4");
258 	__asm__ __volatile__ ("mtspr	27, 4");
259 	__asm__ __volatile__ ("rfi");
260 #endif
261 }
262