xref: /openbmc/u-boot/board/sbc8641d/sbc8641d.c (revision 1878804a)
1 /*
2  * Copyright 2007 Wind River Systemes, Inc. <www.windriver.com>
3  * Copyright 2007 Embedded Specialties, Inc.
4  * Joe Hamman joe.hamman@embeddedspecialties.com
5  *
6  * Copyright 2004 Freescale Semiconductor.
7  * Jeff Brown
8  * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
9  *
10  * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
11  *
12  * SPDX-License-Identifier:	GPL-2.0+
13  */
14 
15 #include <common.h>
16 #include <command.h>
17 #include <pci.h>
18 #include <asm/processor.h>
19 #include <asm/immap_86xx.h>
20 #include <asm/fsl_pci.h>
21 #include <fsl_ddr_sdram.h>
22 #include <asm/fsl_serdes.h>
23 #include <libfdt.h>
24 #include <fdt_support.h>
25 
26 DECLARE_GLOBAL_DATA_PTR;
27 
28 long int fixed_sdram (void);
29 
30 int board_early_init_f (void)
31 {
32 	return 0;
33 }
34 
35 int checkboard (void)
36 {
37 	puts ("Board: Wind River SBC8641D\n");
38 
39 	return 0;
40 }
41 
42 int dram_init(void)
43 {
44 	long dram_size = 0;
45 
46 #if defined(CONFIG_SPD_EEPROM)
47 	dram_size = fsl_ddr_sdram();
48 #else
49 	dram_size = fixed_sdram ();
50 #endif
51 
52 	debug ("    DDR: ");
53 	gd->ram_size = dram_size;
54 
55 	return 0;
56 }
57 
58 #if defined(CONFIG_SYS_DRAM_TEST)
59 int testdram (void)
60 {
61 	uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
62 	uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
63 	uint *p;
64 
65 	puts ("SDRAM test phase 1:\n");
66 	for (p = pstart; p < pend; p++)
67 		*p = 0xaaaaaaaa;
68 
69 	for (p = pstart; p < pend; p++) {
70 		if (*p != 0xaaaaaaaa) {
71 			printf ("SDRAM test fails at: %08x\n", (uint) p);
72 			return 1;
73 		}
74 	}
75 
76 	puts ("SDRAM test phase 2:\n");
77 	for (p = pstart; p < pend; p++)
78 		*p = 0x55555555;
79 
80 	for (p = pstart; p < pend; p++) {
81 		if (*p != 0x55555555) {
82 			printf ("SDRAM test fails at: %08x\n", (uint) p);
83 			return 1;
84 		}
85 	}
86 
87 	puts ("SDRAM test passed.\n");
88 	return 0;
89 }
90 #endif
91 
92 #if !defined(CONFIG_SPD_EEPROM)
93 /*
94  * Fixed sdram init -- doesn't use serial presence detect.
95  */
96 long int fixed_sdram (void)
97 {
98 #if !defined(CONFIG_SYS_RAMBOOT)
99 	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
100 	volatile struct ccsr_ddr *ddr = &immap->im_ddr1;
101 
102 	ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
103 	ddr->cs1_bnds = CONFIG_SYS_DDR_CS1_BNDS;
104 	ddr->cs2_bnds = CONFIG_SYS_DDR_CS2_BNDS;
105 	ddr->cs3_bnds = CONFIG_SYS_DDR_CS3_BNDS;
106 	ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
107 	ddr->cs1_config = CONFIG_SYS_DDR_CS1_CONFIG;
108 	ddr->cs2_config = CONFIG_SYS_DDR_CS2_CONFIG;
109 	ddr->cs3_config = CONFIG_SYS_DDR_CS3_CONFIG;
110 	ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
111 	ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
112 	ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
113 	ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
114 	ddr->sdram_cfg = CONFIG_SYS_DDR_CFG_1A;
115 	ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CFG_2;
116 	ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1;
117 	ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2;
118 	ddr->sdram_md_cntl = CONFIG_SYS_DDR_MODE_CTL;
119 	ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
120 	ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT;
121 	ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL;
122 
123 	asm ("sync;isync");
124 
125 	udelay (500);
126 
127 	ddr->sdram_cfg = CONFIG_SYS_DDR_CFG_1B;
128 	asm ("sync; isync");
129 
130 	udelay (500);
131 	ddr = &immap->im_ddr2;
132 
133 	ddr->cs0_bnds = CONFIG_SYS_DDR2_CS0_BNDS;
134 	ddr->cs1_bnds = CONFIG_SYS_DDR2_CS1_BNDS;
135 	ddr->cs2_bnds = CONFIG_SYS_DDR2_CS2_BNDS;
136 	ddr->cs3_bnds = CONFIG_SYS_DDR2_CS3_BNDS;
137 	ddr->cs0_config = CONFIG_SYS_DDR2_CS0_CONFIG;
138 	ddr->cs1_config = CONFIG_SYS_DDR2_CS1_CONFIG;
139 	ddr->cs2_config = CONFIG_SYS_DDR2_CS2_CONFIG;
140 	ddr->cs3_config = CONFIG_SYS_DDR2_CS3_CONFIG;
141 	ddr->timing_cfg_3 = CONFIG_SYS_DDR2_EXT_REFRESH;
142 	ddr->timing_cfg_0 = CONFIG_SYS_DDR2_TIMING_0;
143 	ddr->timing_cfg_1 = CONFIG_SYS_DDR2_TIMING_1;
144 	ddr->timing_cfg_2 = CONFIG_SYS_DDR2_TIMING_2;
145 	ddr->sdram_cfg = CONFIG_SYS_DDR2_CFG_1A;
146 	ddr->sdram_cfg_2 = CONFIG_SYS_DDR2_CFG_2;
147 	ddr->sdram_mode = CONFIG_SYS_DDR2_MODE_1;
148 	ddr->sdram_mode_2 = CONFIG_SYS_DDR2_MODE_2;
149 	ddr->sdram_md_cntl = CONFIG_SYS_DDR2_MODE_CTL;
150 	ddr->sdram_interval = CONFIG_SYS_DDR2_INTERVAL;
151 	ddr->sdram_data_init = CONFIG_SYS_DDR2_DATA_INIT;
152 	ddr->sdram_clk_cntl = CONFIG_SYS_DDR2_CLK_CTRL;
153 
154 	asm ("sync;isync");
155 
156 	udelay (500);
157 
158 	ddr->sdram_cfg = CONFIG_SYS_DDR2_CFG_1B;
159 	asm ("sync; isync");
160 
161 	udelay (500);
162 #endif
163 	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
164 }
165 #endif				/* !defined(CONFIG_SPD_EEPROM) */
166 
167 #if defined(CONFIG_PCI)
168 /*
169  * Initialize PCI Devices, report devices found.
170  */
171 
172 void pci_init_board(void)
173 {
174 	fsl_pcie_init_board(0);
175 }
176 #endif /* CONFIG_PCI */
177 
178 
179 #if defined(CONFIG_OF_BOARD_SETUP)
180 int ft_board_setup(void *blob, bd_t *bd)
181 {
182 	ft_cpu_setup(blob, bd);
183 
184 	FT_FSL_PCI_SETUP;
185 
186 	return 0;
187 }
188 #endif
189 
190 void sbc8641d_reset_board (void)
191 {
192 	puts ("Resetting board....\n");
193 }
194 
195 /*
196  * get_board_sys_clk
197  *      Clock is fixed at 1GHz on this board. Used for CONFIG_SYS_CLK_FREQ
198  */
199 
200 unsigned long get_board_sys_clk (ulong dummy)
201 {
202 	int i;
203 	ulong val = 0;
204 
205 	i = 5;
206 	i &= 0x07;
207 
208 	switch (i) {
209 	case 0:
210 		val = 33000000;
211 		break;
212 	case 1:
213 		val = 40000000;
214 		break;
215 	case 2:
216 		val = 50000000;
217 		break;
218 	case 3:
219 		val = 66000000;
220 		break;
221 	case 4:
222 		val = 83000000;
223 		break;
224 	case 5:
225 		val = 100000000;
226 		break;
227 	case 6:
228 		val = 134000000;
229 		break;
230 	case 7:
231 		val = 166000000;
232 		break;
233 	}
234 
235 	return val;
236 }
237 
238 void board_reset(void)
239 {
240 #ifdef CONFIG_SYS_RESET_ADDRESS
241 	ulong addr = CONFIG_SYS_RESET_ADDRESS;
242 
243 	/* flush and disable I/D cache */
244 	__asm__ __volatile__ ("mfspr	3, 1008"	::: "r3");
245 	__asm__ __volatile__ ("ori	5, 5, 0xcc00"	::: "r5");
246 	__asm__ __volatile__ ("ori	4, 3, 0xc00"	::: "r4");
247 	__asm__ __volatile__ ("andc	5, 3, 5"	::: "r5");
248 	__asm__ __volatile__ ("sync");
249 	__asm__ __volatile__ ("mtspr	1008, 4");
250 	__asm__ __volatile__ ("isync");
251 	__asm__ __volatile__ ("sync");
252 	__asm__ __volatile__ ("mtspr	1008, 5");
253 	__asm__ __volatile__ ("isync");
254 	__asm__ __volatile__ ("sync");
255 
256 	/*
257 	 * SRR0 has system reset vector, SRR1 has default MSR value
258 	 * rfi restores MSR from SRR1 and sets the PC to the SRR0 value
259 	 */
260 	__asm__ __volatile__ ("mtspr	26, %0"		:: "r" (addr));
261 	__asm__ __volatile__ ("li	4, (1 << 6)"	::: "r4");
262 	__asm__ __volatile__ ("mtspr	27, 4");
263 	__asm__ __volatile__ ("rfi");
264 #endif
265 }
266