1 /* 2 * Copyright (C) 2011 Samsung Electronics 3 * Heungjun Kim <riverful.kim@samsung.com> 4 * Kyungmin Park <kyungmin.park@samsung.com> 5 * Donghwa Lee <dh09.lee@samsung.com> 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #include <common.h> 11 #include <lcd.h> 12 #include <asm/io.h> 13 #include <asm/gpio.h> 14 #include <asm/arch/cpu.h> 15 #include <asm/arch/pinmux.h> 16 #include <asm/arch/clock.h> 17 #include <asm/arch/mipi_dsim.h> 18 #include <asm/arch/watchdog.h> 19 #include <asm/arch/power.h> 20 #include <power/pmic.h> 21 #include <usb/dwc2_udc.h> 22 #include <power/max8997_pmic.h> 23 #include <power/max8997_muic.h> 24 #include <power/battery.h> 25 #include <power/max17042_fg.h> 26 #include <libtizen.h> 27 #include <usb.h> 28 #include <usb_mass_storage.h> 29 30 #include "setup.h" 31 32 DECLARE_GLOBAL_DATA_PTR; 33 34 unsigned int board_rev; 35 36 #ifdef CONFIG_REVISION_TAG 37 u32 get_board_rev(void) 38 { 39 return board_rev; 40 } 41 #endif 42 43 static void check_hw_revision(void); 44 struct dwc2_plat_otg_data s5pc210_otg_data; 45 46 int exynos_init(void) 47 { 48 check_hw_revision(); 49 printf("HW Revision:\t0x%x\n", board_rev); 50 51 return 0; 52 } 53 54 void i2c_init_board(void) 55 { 56 int err; 57 58 /* I2C_5 -> PMIC */ 59 err = exynos_pinmux_config(PERIPH_ID_I2C5, PINMUX_FLAG_NONE); 60 if (err) { 61 debug("I2C%d not configured\n", (I2C_5)); 62 return; 63 } 64 65 /* I2C_8 -> FG */ 66 gpio_request(EXYNOS4_GPIO_Y40, "i2c_clk"); 67 gpio_request(EXYNOS4_GPIO_Y41, "i2c_data"); 68 gpio_direction_output(EXYNOS4_GPIO_Y40, 1); 69 gpio_direction_output(EXYNOS4_GPIO_Y41, 1); 70 } 71 72 static void trats_low_power_mode(void) 73 { 74 struct exynos4_clock *clk = 75 (struct exynos4_clock *)samsung_get_base_clock(); 76 struct exynos4_power *pwr = 77 (struct exynos4_power *)samsung_get_base_power(); 78 79 /* Power down CORE1 */ 80 /* LOCAL_PWR_CFG [1:0] 0x3 EN, 0x0 DIS */ 81 writel(0x0, &pwr->arm_core1_configuration); 82 83 /* Change the APLL frequency */ 84 /* ENABLE (1 enable) | LOCKED (1 locked) */ 85 /* [31] | [29] */ 86 /* FSEL | MDIV | PDIV | SDIV */ 87 /* [27] | [25:16] | [13:8] | [2:0] */ 88 writel(0xa0c80604, &clk->apll_con0); 89 90 /* Change CPU0 clock divider */ 91 /* CORE2_RATIO | APLL_RATIO | PCLK_DBG_RATIO | ATB_RATIO */ 92 /* [30:28] | [26:24] | [22:20] | [18:16] */ 93 /* PERIPH_RATIO | COREM1_RATIO | COREM0_RATIO | CORE_RATIO */ 94 /* [14:12] | [10:8] | [6:4] | [2:0] */ 95 writel(0x00000100, &clk->div_cpu0); 96 97 /* CLK_DIV_STAT_CPU0 - wait until clock gets stable (0 = stable) */ 98 while (readl(&clk->div_stat_cpu0) & 0x1111111) 99 continue; 100 101 /* Change clock divider ratio for DMC */ 102 /* DMCP_RATIO | DMCD_RATIO */ 103 /* [22:20] | [18:16] */ 104 /* DMC_RATIO | DPHY_RATIO | ACP_PCLK_RATIO | ACP_RATIO */ 105 /* [14:12] | [10:8] | [6:4] | [2:0] */ 106 writel(0x13113117, &clk->div_dmc0); 107 108 /* CLK_DIV_STAT_DMC0 - wait until clock gets stable (0 = stable) */ 109 while (readl(&clk->div_stat_dmc0) & 0x11111111) 110 continue; 111 112 /* Turn off unnecessary power domains */ 113 writel(0x0, &pwr->xxti_configuration); /* XXTI */ 114 writel(0x0, &pwr->cam_configuration); /* CAM */ 115 writel(0x0, &pwr->tv_configuration); /* TV */ 116 writel(0x0, &pwr->mfc_configuration); /* MFC */ 117 writel(0x0, &pwr->g3d_configuration); /* G3D */ 118 writel(0x0, &pwr->gps_configuration); /* GPS */ 119 writel(0x0, &pwr->gps_alive_configuration); /* GPS_ALIVE */ 120 121 /* Turn off unnecessary clocks */ 122 writel(0x0, &clk->gate_ip_cam); /* CAM */ 123 writel(0x0, &clk->gate_ip_tv); /* TV */ 124 writel(0x0, &clk->gate_ip_mfc); /* MFC */ 125 writel(0x0, &clk->gate_ip_g3d); /* G3D */ 126 writel(0x0, &clk->gate_ip_image); /* IMAGE */ 127 writel(0x0, &clk->gate_ip_gps); /* GPS */ 128 } 129 130 static int pmic_init_max8997(void) 131 { 132 struct pmic *p = pmic_get("MAX8997_PMIC"); 133 int i = 0, ret = 0; 134 u32 val; 135 136 if (pmic_probe(p)) 137 return -1; 138 139 /* BUCK1 VARM: 1.2V */ 140 val = (1200000 - 650000) / 25000; 141 ret |= pmic_reg_write(p, MAX8997_REG_BUCK1DVS1, val); 142 val = ENBUCK | ACTIVE_DISCHARGE; /* DVS OFF */ 143 ret |= pmic_reg_write(p, MAX8997_REG_BUCK1CTRL, val); 144 145 /* BUCK2 VINT: 1.1V */ 146 val = (1100000 - 650000) / 25000; 147 ret |= pmic_reg_write(p, MAX8997_REG_BUCK2DVS1, val); 148 val = ENBUCK | ACTIVE_DISCHARGE; /* DVS OFF */ 149 ret |= pmic_reg_write(p, MAX8997_REG_BUCK2CTRL, val); 150 151 152 /* BUCK3 G3D: 1.1V - OFF */ 153 ret |= pmic_reg_read(p, MAX8997_REG_BUCK3CTRL, &val); 154 val &= ~ENBUCK; 155 ret |= pmic_reg_write(p, MAX8997_REG_BUCK3CTRL, val); 156 157 val = (1100000 - 750000) / 50000; 158 ret |= pmic_reg_write(p, MAX8997_REG_BUCK3DVS, val); 159 160 /* BUCK4 CAMISP: 1.2V - OFF */ 161 ret |= pmic_reg_read(p, MAX8997_REG_BUCK4CTRL, &val); 162 val &= ~ENBUCK; 163 ret |= pmic_reg_write(p, MAX8997_REG_BUCK4CTRL, val); 164 165 val = (1200000 - 650000) / 25000; 166 ret |= pmic_reg_write(p, MAX8997_REG_BUCK4DVS, val); 167 168 /* BUCK5 VMEM: 1.2V */ 169 val = (1200000 - 650000) / 25000; 170 for (i = 0; i < 8; i++) 171 ret |= pmic_reg_write(p, MAX8997_REG_BUCK5DVS1 + i, val); 172 173 val = ENBUCK | ACTIVE_DISCHARGE; /* DVS OFF */ 174 ret |= pmic_reg_write(p, MAX8997_REG_BUCK5CTRL, val); 175 176 /* BUCK6 CAM AF: 2.8V */ 177 /* No Voltage Setting Register */ 178 /* GNSLCT 3.0X */ 179 val = GNSLCT; 180 ret |= pmic_reg_write(p, MAX8997_REG_BUCK6CTRL, val); 181 182 /* BUCK7 VCC_SUB: 2.0V */ 183 val = (2000000 - 750000) / 50000; 184 ret |= pmic_reg_write(p, MAX8997_REG_BUCK7DVS, val); 185 186 /* LDO1 VADC: 3.3V */ 187 val = max8997_reg_ldo(3300000) | DIS_LDO; /* OFF */ 188 ret |= pmic_reg_write(p, MAX8997_REG_LDO1CTRL, val); 189 190 /* LDO1 Disable active discharging */ 191 ret |= pmic_reg_read(p, MAX8997_REG_LDO1CONFIG, &val); 192 val &= ~LDO_ADE; 193 ret |= pmic_reg_write(p, MAX8997_REG_LDO1CONFIG, val); 194 195 /* LDO2 VALIVE: 1.1V */ 196 val = max8997_reg_ldo(1100000) | EN_LDO; 197 ret |= pmic_reg_write(p, MAX8997_REG_LDO2CTRL, val); 198 199 /* LDO3 VUSB/MIPI: 1.1V */ 200 val = max8997_reg_ldo(1100000) | DIS_LDO; /* OFF */ 201 ret |= pmic_reg_write(p, MAX8997_REG_LDO3CTRL, val); 202 203 /* LDO4 VMIPI: 1.8V */ 204 val = max8997_reg_ldo(1800000) | DIS_LDO; /* OFF */ 205 ret |= pmic_reg_write(p, MAX8997_REG_LDO4CTRL, val); 206 207 /* LDO5 VHSIC: 1.2V */ 208 val = max8997_reg_ldo(1200000) | DIS_LDO; /* OFF */ 209 ret |= pmic_reg_write(p, MAX8997_REG_LDO5CTRL, val); 210 211 /* LDO6 VCC_1.8V_PDA: 1.8V */ 212 val = max8997_reg_ldo(1800000) | EN_LDO; 213 ret |= pmic_reg_write(p, MAX8997_REG_LDO6CTRL, val); 214 215 /* LDO7 CAM_ISP: 1.8V */ 216 val = max8997_reg_ldo(1800000) | DIS_LDO; /* OFF */ 217 ret |= pmic_reg_write(p, MAX8997_REG_LDO7CTRL, val); 218 219 /* LDO8 VDAC/VUSB: 3.3V */ 220 val = max8997_reg_ldo(3300000) | DIS_LDO; /* OFF */ 221 ret |= pmic_reg_write(p, MAX8997_REG_LDO8CTRL, val); 222 223 /* LDO9 VCC_2.8V_PDA: 2.8V */ 224 val = max8997_reg_ldo(2800000) | EN_LDO; 225 ret |= pmic_reg_write(p, MAX8997_REG_LDO9CTRL, val); 226 227 /* LDO10 VPLL: 1.1V */ 228 val = max8997_reg_ldo(1100000) | EN_LDO; 229 ret |= pmic_reg_write(p, MAX8997_REG_LDO10CTRL, val); 230 231 /* LDO11 TOUCH: 2.8V */ 232 val = max8997_reg_ldo(2800000) | DIS_LDO; /* OFF */ 233 ret |= pmic_reg_write(p, MAX8997_REG_LDO11CTRL, val); 234 235 /* LDO12 VTCAM: 1.8V */ 236 val = max8997_reg_ldo(1800000) | DIS_LDO; /* OFF */ 237 ret |= pmic_reg_write(p, MAX8997_REG_LDO12CTRL, val); 238 239 /* LDO13 VCC_3.0_LCD: 3.0V */ 240 val = max8997_reg_ldo(3000000) | DIS_LDO; /* OFF */ 241 ret |= pmic_reg_write(p, MAX8997_REG_LDO13CTRL, val); 242 243 /* LDO14 MOTOR: 3.0V */ 244 val = max8997_reg_ldo(3000000) | DIS_LDO; /* OFF */ 245 ret |= pmic_reg_write(p, MAX8997_REG_LDO14CTRL, val); 246 247 /* LDO15 LED_A: 2.8V */ 248 val = max8997_reg_ldo(2800000) | DIS_LDO; /* OFF */ 249 ret |= pmic_reg_write(p, MAX8997_REG_LDO15CTRL, val); 250 251 /* LDO16 CAM_SENSOR: 1.8V */ 252 val = max8997_reg_ldo(1800000) | DIS_LDO; /* OFF */ 253 ret |= pmic_reg_write(p, MAX8997_REG_LDO16CTRL, val); 254 255 /* LDO17 VTF: 2.8V */ 256 val = max8997_reg_ldo(2800000) | DIS_LDO; /* OFF */ 257 ret |= pmic_reg_write(p, MAX8997_REG_LDO17CTRL, val); 258 259 /* LDO18 TOUCH_LED 3.3V */ 260 val = max8997_reg_ldo(3300000) | DIS_LDO; /* OFF */ 261 ret |= pmic_reg_write(p, MAX8997_REG_LDO18CTRL, val); 262 263 /* LDO21 VDDQ: 1.2V */ 264 val = max8997_reg_ldo(1200000) | EN_LDO; 265 ret |= pmic_reg_write(p, MAX8997_REG_LDO21CTRL, val); 266 267 /* SAFEOUT for both 1 and 2: 4.9V, Active discharge, Enable */ 268 val = (SAFEOUT_4_90V << 0) | (SAFEOUT_4_90V << 2) | 269 ACTDISSAFEO1 | ACTDISSAFEO2 | ENSAFEOUT1 | ENSAFEOUT2; 270 ret |= pmic_reg_write(p, MAX8997_REG_SAFEOUTCTRL, val); 271 272 if (ret) { 273 puts("MAX8997 PMIC setting error!\n"); 274 return -1; 275 } 276 return 0; 277 } 278 279 int exynos_power_init(void) 280 { 281 int chrg, ret; 282 struct power_battery *pb; 283 struct pmic *p_fg, *p_chrg, *p_muic, *p_bat; 284 285 /* 286 * For PMIC/MUIC the I2C bus is named as I2C5, but it is connected 287 * to logical I2C adapter 0 288 * 289 * The FUEL_GAUGE is marked as I2C9 on the schematic, but connected 290 * to logical I2C adapter 1 291 */ 292 ret = pmic_init(I2C_5); 293 ret |= pmic_init_max8997(); 294 ret |= power_fg_init(I2C_9); 295 ret |= power_muic_init(I2C_5); 296 ret |= power_bat_init(0); 297 if (ret) 298 return ret; 299 300 p_fg = pmic_get("MAX17042_FG"); 301 if (!p_fg) { 302 puts("MAX17042_FG: Not found\n"); 303 return -ENODEV; 304 } 305 306 p_chrg = pmic_get("MAX8997_PMIC"); 307 if (!p_chrg) { 308 puts("MAX8997_PMIC: Not found\n"); 309 return -ENODEV; 310 } 311 312 p_muic = pmic_get("MAX8997_MUIC"); 313 if (!p_muic) { 314 puts("MAX8997_MUIC: Not found\n"); 315 return -ENODEV; 316 } 317 318 p_bat = pmic_get("BAT_TRATS"); 319 if (!p_bat) { 320 puts("BAT_TRATS: Not found\n"); 321 return -ENODEV; 322 } 323 324 p_fg->parent = p_bat; 325 p_chrg->parent = p_bat; 326 p_muic->parent = p_bat; 327 328 p_bat->low_power_mode = trats_low_power_mode; 329 p_bat->pbat->battery_init(p_bat, p_fg, p_chrg, p_muic); 330 331 pb = p_bat->pbat; 332 chrg = p_muic->chrg->chrg_type(p_muic); 333 debug("CHARGER TYPE: %d\n", chrg); 334 335 if (!p_chrg->chrg->chrg_bat_present(p_chrg)) { 336 puts("No battery detected\n"); 337 return 0; 338 } 339 340 p_fg->fg->fg_battery_check(p_fg, p_bat); 341 342 if (pb->bat->state == CHARGE && chrg == CHARGER_USB) 343 puts("CHARGE Battery !\n"); 344 345 return 0; 346 } 347 348 static unsigned int get_hw_revision(void) 349 { 350 int hwrev = 0; 351 char str[10]; 352 int i; 353 354 /* hw_rev[3:0] == GPE1[3:0] */ 355 for (i = 0; i < 4; i++) { 356 int pin = i + EXYNOS4_GPIO_E10; 357 358 sprintf(str, "hw_rev%d", i); 359 gpio_request(pin, str); 360 gpio_cfg_pin(pin, S5P_GPIO_INPUT); 361 gpio_set_pull(pin, S5P_GPIO_PULL_NONE); 362 } 363 364 udelay(1); 365 366 for (i = 0; i < 4; i++) 367 hwrev |= (gpio_get_value(EXYNOS4_GPIO_E10 + i) << i); 368 369 debug("hwrev 0x%x\n", hwrev); 370 371 return hwrev; 372 } 373 374 static void check_hw_revision(void) 375 { 376 int hwrev; 377 378 hwrev = get_hw_revision(); 379 380 board_rev |= hwrev; 381 } 382 383 384 #ifdef CONFIG_USB_GADGET 385 static int s5pc210_phy_control(int on) 386 { 387 int ret = 0; 388 u32 val = 0; 389 struct pmic *p = pmic_get("MAX8997_PMIC"); 390 if (!p) 391 return -ENODEV; 392 393 if (pmic_probe(p)) 394 return -1; 395 396 if (on) { 397 ret |= pmic_set_output(p, MAX8997_REG_SAFEOUTCTRL, 398 ENSAFEOUT1, LDO_ON); 399 ret |= pmic_reg_read(p, MAX8997_REG_LDO3CTRL, &val); 400 ret |= pmic_reg_write(p, MAX8997_REG_LDO3CTRL, EN_LDO | val); 401 402 ret |= pmic_reg_read(p, MAX8997_REG_LDO8CTRL, &val); 403 ret |= pmic_reg_write(p, MAX8997_REG_LDO8CTRL, EN_LDO | val); 404 } else { 405 ret |= pmic_reg_read(p, MAX8997_REG_LDO8CTRL, &val); 406 ret |= pmic_reg_write(p, MAX8997_REG_LDO8CTRL, DIS_LDO | val); 407 408 ret |= pmic_reg_read(p, MAX8997_REG_LDO3CTRL, &val); 409 ret |= pmic_reg_write(p, MAX8997_REG_LDO3CTRL, DIS_LDO | val); 410 ret |= pmic_set_output(p, MAX8997_REG_SAFEOUTCTRL, 411 ENSAFEOUT1, LDO_OFF); 412 } 413 414 if (ret) { 415 puts("MAX8997 LDO setting error!\n"); 416 return -1; 417 } 418 419 return 0; 420 } 421 422 struct dwc2_plat_otg_data s5pc210_otg_data = { 423 .phy_control = s5pc210_phy_control, 424 .regs_phy = EXYNOS4_USBPHY_BASE, 425 .regs_otg = EXYNOS4_USBOTG_BASE, 426 .usb_phy_ctrl = EXYNOS4_USBPHY_CONTROL, 427 .usb_flags = PHY0_SLEEP, 428 }; 429 430 int board_usb_init(int index, enum usb_init_type init) 431 { 432 debug("USB_udc_probe\n"); 433 return dwc2_udc_probe(&s5pc210_otg_data); 434 } 435 436 int g_dnl_board_usb_cable_connected(void) 437 { 438 struct pmic *muic = pmic_get("MAX8997_MUIC"); 439 if (!muic) 440 return 0; 441 442 return !!muic->chrg->chrg_type(muic); 443 } 444 #endif 445 446 static void pmic_reset(void) 447 { 448 gpio_direction_output(EXYNOS4_GPIO_X07, 1); 449 gpio_set_pull(EXYNOS4_GPIO_X27, S5P_GPIO_PULL_NONE); 450 } 451 452 static void board_clock_init(void) 453 { 454 struct exynos4_clock *clk = 455 (struct exynos4_clock *)samsung_get_base_clock(); 456 457 writel(CLK_SRC_CPU_VAL, (unsigned int)&clk->src_cpu); 458 writel(CLK_SRC_TOP0_VAL, (unsigned int)&clk->src_top0); 459 writel(CLK_SRC_FSYS_VAL, (unsigned int)&clk->src_fsys); 460 writel(CLK_SRC_PERIL0_VAL, (unsigned int)&clk->src_peril0); 461 462 writel(CLK_DIV_CPU0_VAL, (unsigned int)&clk->div_cpu0); 463 writel(CLK_DIV_CPU1_VAL, (unsigned int)&clk->div_cpu1); 464 writel(CLK_DIV_DMC0_VAL, (unsigned int)&clk->div_dmc0); 465 writel(CLK_DIV_DMC1_VAL, (unsigned int)&clk->div_dmc1); 466 writel(CLK_DIV_LEFTBUS_VAL, (unsigned int)&clk->div_leftbus); 467 writel(CLK_DIV_RIGHTBUS_VAL, (unsigned int)&clk->div_rightbus); 468 writel(CLK_DIV_TOP_VAL, (unsigned int)&clk->div_top); 469 writel(CLK_DIV_FSYS1_VAL, (unsigned int)&clk->div_fsys1); 470 writel(CLK_DIV_FSYS2_VAL, (unsigned int)&clk->div_fsys2); 471 writel(CLK_DIV_FSYS3_VAL, (unsigned int)&clk->div_fsys3); 472 writel(CLK_DIV_PERIL0_VAL, (unsigned int)&clk->div_peril0); 473 writel(CLK_DIV_PERIL3_VAL, (unsigned int)&clk->div_peril3); 474 475 writel(PLL_LOCKTIME, (unsigned int)&clk->apll_lock); 476 writel(PLL_LOCKTIME, (unsigned int)&clk->mpll_lock); 477 writel(PLL_LOCKTIME, (unsigned int)&clk->epll_lock); 478 writel(PLL_LOCKTIME, (unsigned int)&clk->vpll_lock); 479 writel(APLL_CON1_VAL, (unsigned int)&clk->apll_con1); 480 writel(APLL_CON0_VAL, (unsigned int)&clk->apll_con0); 481 writel(MPLL_CON1_VAL, (unsigned int)&clk->mpll_con1); 482 writel(MPLL_CON0_VAL, (unsigned int)&clk->mpll_con0); 483 writel(EPLL_CON1_VAL, (unsigned int)&clk->epll_con1); 484 writel(EPLL_CON0_VAL, (unsigned int)&clk->epll_con0); 485 writel(VPLL_CON1_VAL, (unsigned int)&clk->vpll_con1); 486 writel(VPLL_CON0_VAL, (unsigned int)&clk->vpll_con0); 487 488 writel(CLK_GATE_IP_CAM_VAL, (unsigned int)&clk->gate_ip_cam); 489 writel(CLK_GATE_IP_VP_VAL, (unsigned int)&clk->gate_ip_tv); 490 writel(CLK_GATE_IP_MFC_VAL, (unsigned int)&clk->gate_ip_mfc); 491 writel(CLK_GATE_IP_G3D_VAL, (unsigned int)&clk->gate_ip_g3d); 492 writel(CLK_GATE_IP_IMAGE_VAL, (unsigned int)&clk->gate_ip_image); 493 writel(CLK_GATE_IP_LCD0_VAL, (unsigned int)&clk->gate_ip_lcd0); 494 writel(CLK_GATE_IP_LCD1_VAL, (unsigned int)&clk->gate_ip_lcd1); 495 writel(CLK_GATE_IP_FSYS_VAL, (unsigned int)&clk->gate_ip_fsys); 496 writel(CLK_GATE_IP_GPS_VAL, (unsigned int)&clk->gate_ip_gps); 497 writel(CLK_GATE_IP_PERIL_VAL, (unsigned int)&clk->gate_ip_peril); 498 writel(CLK_GATE_IP_PERIR_VAL, (unsigned int)&clk->gate_ip_perir); 499 writel(CLK_GATE_BLOCK_VAL, (unsigned int)&clk->gate_block); 500 } 501 502 static void board_power_init(void) 503 { 504 struct exynos4_power *pwr = 505 (struct exynos4_power *)samsung_get_base_power(); 506 507 /* PS HOLD */ 508 writel(EXYNOS4_PS_HOLD_CON_VAL, (unsigned int)&pwr->ps_hold_control); 509 510 /* Set power down */ 511 writel(0, (unsigned int)&pwr->cam_configuration); 512 writel(0, (unsigned int)&pwr->tv_configuration); 513 writel(0, (unsigned int)&pwr->mfc_configuration); 514 writel(0, (unsigned int)&pwr->g3d_configuration); 515 writel(0, (unsigned int)&pwr->lcd1_configuration); 516 writel(0, (unsigned int)&pwr->gps_configuration); 517 writel(0, (unsigned int)&pwr->gps_alive_configuration); 518 519 /* It is necessary to power down core 1 */ 520 /* to successfully boot CPU1 in kernel */ 521 writel(0, (unsigned int)&pwr->arm_core1_configuration); 522 } 523 524 static void exynos_uart_init(void) 525 { 526 /* UART_SEL GPY4[7] (part2) at EXYNOS4 */ 527 gpio_request(EXYNOS4_GPIO_Y47, "uart_sel"); 528 gpio_set_pull(EXYNOS4_GPIO_Y47, S5P_GPIO_PULL_UP); 529 gpio_direction_output(EXYNOS4_GPIO_Y47, 1); 530 } 531 532 int exynos_early_init_f(void) 533 { 534 wdt_stop(); 535 pmic_reset(); 536 board_clock_init(); 537 exynos_uart_init(); 538 board_power_init(); 539 540 return 0; 541 } 542 543 void exynos_reset_lcd(void) 544 { 545 gpio_request(EXYNOS4_GPIO_Y45, "lcd_reset"); 546 gpio_direction_output(EXYNOS4_GPIO_Y45, 1); 547 udelay(10000); 548 gpio_direction_output(EXYNOS4_GPIO_Y45, 0); 549 udelay(10000); 550 gpio_direction_output(EXYNOS4_GPIO_Y45, 1); 551 } 552 553 int lcd_power(void) 554 { 555 int ret = 0; 556 struct pmic *p = pmic_get("MAX8997_PMIC"); 557 if (!p) 558 return -ENODEV; 559 560 if (pmic_probe(p)) 561 return 0; 562 563 /* LDO15 voltage: 2.2v */ 564 ret |= pmic_reg_write(p, MAX8997_REG_LDO15CTRL, 0x1c | EN_LDO); 565 /* LDO13 voltage: 3.0v */ 566 ret |= pmic_reg_write(p, MAX8997_REG_LDO13CTRL, 0x2c | EN_LDO); 567 568 if (ret) { 569 puts("MAX8997 LDO setting error!\n"); 570 return -1; 571 } 572 573 return 0; 574 } 575 576 int mipi_power(void) 577 { 578 int ret = 0; 579 struct pmic *p = pmic_get("MAX8997_PMIC"); 580 if (!p) 581 return -ENODEV; 582 583 if (pmic_probe(p)) 584 return 0; 585 586 /* LDO3 voltage: 1.1v */ 587 ret |= pmic_reg_write(p, MAX8997_REG_LDO3CTRL, 0x6 | EN_LDO); 588 /* LDO4 voltage: 1.8v */ 589 ret |= pmic_reg_write(p, MAX8997_REG_LDO4CTRL, 0x14 | EN_LDO); 590 591 if (ret) { 592 puts("MAX8997 LDO setting error!\n"); 593 return -1; 594 } 595 596 return 0; 597 } 598 599 void exynos_lcd_misc_init(vidinfo_t *vid) 600 { 601 #ifdef CONFIG_TIZEN 602 get_tizen_logo_info(vid); 603 #endif 604 #ifdef CONFIG_S6E8AX0 605 s6e8ax0_init(); 606 setenv("lcdinfo", "lcd=s6e8ax0"); 607 #endif 608 } 609