1 /* 2 * Copyright (C) 2008-2009 Samsung Electronics 3 * Minkyu Kang <mk7.kang@samsung.com> 4 * Kyungmin Park <kyungmin.park@samsung.com> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #include <common.h> 10 #include <asm/gpio.h> 11 #include <asm/arch/mmc.h> 12 #include <dm.h> 13 #include <power/pmic.h> 14 #include <usb/dwc2_udc.h> 15 #include <asm/arch/cpu.h> 16 #include <power/max8998_pmic.h> 17 #include <samsung/misc.h> 18 #include <usb.h> 19 #include <usb_mass_storage.h> 20 #include <asm/mach-types.h> 21 22 DECLARE_GLOBAL_DATA_PTR; 23 24 u32 get_board_rev(void) 25 { 26 return 0; 27 } 28 29 int board_init(void) 30 { 31 /* Set Initial global variables */ 32 gd->bd->bi_arch_number = MACH_TYPE_GONI; 33 gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; 34 35 return 0; 36 } 37 38 #ifdef CONFIG_SYS_I2C_INIT_BOARD 39 void i2c_init_board(void) 40 { 41 gpio_request(S5PC110_GPIO_J43, "i2c_clk"); 42 gpio_request(S5PC110_GPIO_J40, "i2c_data"); 43 gpio_direction_output(S5PC110_GPIO_J43, 1); 44 gpio_direction_output(S5PC110_GPIO_J40, 1); 45 } 46 #endif 47 48 int dram_init(void) 49 { 50 gd->ram_size = PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE + 51 PHYS_SDRAM_3_SIZE; 52 53 return 0; 54 } 55 56 int dram_init_banksize(void) 57 { 58 gd->bd->bi_dram[0].start = PHYS_SDRAM_1; 59 gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; 60 gd->bd->bi_dram[1].start = PHYS_SDRAM_2; 61 gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; 62 gd->bd->bi_dram[2].start = PHYS_SDRAM_3; 63 gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE; 64 65 return 0; 66 } 67 68 #ifdef CONFIG_DISPLAY_BOARDINFO 69 int checkboard(void) 70 { 71 puts("Board:\tGoni\n"); 72 return 0; 73 } 74 #endif 75 76 #ifdef CONFIG_MMC 77 int board_mmc_init(bd_t *bis) 78 { 79 int i, ret, ret_sd = 0; 80 81 /* MASSMEMORY_EN: XMSMDATA7: GPJ2[7] output high */ 82 gpio_request(S5PC110_GPIO_J27, "massmemory_en"); 83 gpio_direction_output(S5PC110_GPIO_J27, 1); 84 85 /* 86 * MMC0 GPIO 87 * GPG0[0] SD_0_CLK 88 * GPG0[1] SD_0_CMD 89 * GPG0[2] SD_0_CDn -> Not used 90 * GPG0[3:6] SD_0_DATA[0:3] 91 */ 92 for (i = S5PC110_GPIO_G00; i < S5PC110_GPIO_G07; i++) { 93 if (i == S5PC110_GPIO_G02) 94 continue; 95 /* GPG0[0:6] special function 2 */ 96 gpio_cfg_pin(i, 0x2); 97 /* GPG0[0:6] pull disable */ 98 gpio_set_pull(i, S5P_GPIO_PULL_NONE); 99 /* GPG0[0:6] drv 4x */ 100 gpio_set_drv(i, S5P_GPIO_DRV_4X); 101 } 102 103 ret = s5p_mmc_init(0, 4); 104 if (ret) 105 error("MMC: Failed to init MMC:0.\n"); 106 107 /* 108 * SD card (T_FLASH) detect and init 109 * T_FLASH_DETECT: EINT28: GPH3[4] input mode 110 */ 111 gpio_request(S5PC110_GPIO_H34, "t_flash_detect"); 112 gpio_cfg_pin(S5PC110_GPIO_H34, S5P_GPIO_INPUT); 113 gpio_set_pull(S5PC110_GPIO_H34, S5P_GPIO_PULL_UP); 114 115 if (!gpio_get_value(S5PC110_GPIO_H34)) { 116 for (i = S5PC110_GPIO_G20; i < S5PC110_GPIO_G27; i++) { 117 if (i == S5PC110_GPIO_G22) 118 continue; 119 120 /* GPG2[0:6] special function 2 */ 121 gpio_cfg_pin(i, 0x2); 122 /* GPG2[0:6] pull disable */ 123 gpio_set_pull(i, S5P_GPIO_PULL_NONE); 124 /* GPG2[0:6] drv 4x */ 125 gpio_set_drv(i, S5P_GPIO_DRV_4X); 126 } 127 128 ret_sd = s5p_mmc_init(2, 4); 129 if (ret_sd) 130 error("MMC: Failed to init SD card (MMC:2).\n"); 131 } 132 133 return ret & ret_sd; 134 } 135 #endif 136 137 #ifdef CONFIG_USB_GADGET 138 static int s5pc1xx_phy_control(int on) 139 { 140 struct udevice *dev; 141 static int status; 142 int reg, ret; 143 144 ret = pmic_get("max8998-pmic", &dev); 145 if (ret) 146 return ret; 147 148 if (on && !status) { 149 reg = pmic_reg_read(dev, MAX8998_REG_ONOFF1); 150 reg |= MAX8998_LDO3; 151 ret = pmic_reg_write(dev, MAX8998_REG_ONOFF1, reg); 152 if (ret) { 153 puts("MAX8998 LDO setting error!\n"); 154 return -EINVAL; 155 } 156 157 reg = pmic_reg_read(dev, MAX8998_REG_ONOFF2); 158 reg |= MAX8998_LDO8; 159 ret = pmic_reg_write(dev, MAX8998_REG_ONOFF2, reg); 160 if (ret) { 161 puts("MAX8998 LDO setting error!\n"); 162 return -EINVAL; 163 } 164 status = 1; 165 } else if (!on && status) { 166 reg = pmic_reg_read(dev, MAX8998_REG_ONOFF1); 167 reg &= ~MAX8998_LDO3; 168 ret = pmic_reg_write(dev, MAX8998_REG_ONOFF1, reg); 169 if (ret) { 170 puts("MAX8998 LDO setting error!\n"); 171 return -EINVAL; 172 } 173 174 reg = pmic_reg_read(dev, MAX8998_REG_ONOFF2); 175 reg &= ~MAX8998_LDO8; 176 ret = pmic_reg_write(dev, MAX8998_REG_ONOFF2, reg); 177 if (ret) { 178 puts("MAX8998 LDO setting error!\n"); 179 return -EINVAL; 180 } 181 status = 0; 182 } 183 udelay(10000); 184 return 0; 185 } 186 187 struct dwc2_plat_otg_data s5pc110_otg_data = { 188 .phy_control = s5pc1xx_phy_control, 189 .regs_phy = S5PC110_PHY_BASE, 190 .regs_otg = S5PC110_OTG_BASE, 191 .usb_phy_ctrl = S5PC110_USB_PHY_CONTROL, 192 }; 193 194 int board_usb_init(int index, enum usb_init_type init) 195 { 196 debug("USB_udc_probe\n"); 197 return dwc2_udc_probe(&s5pc110_otg_data); 198 } 199 #endif 200 201 #ifdef CONFIG_MISC_INIT_R 202 int misc_init_r(void) 203 { 204 #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG 205 set_board_info(); 206 #endif 207 return 0; 208 } 209 #endif 210 211 int board_usb_cleanup(int index, enum usb_init_type init) 212 { 213 return 0; 214 } 215