1 /* 2 * (C) Copyright 2007-2008 3 * Stelian Pop <stelian.pop@leadtechdesign.com> 4 * Lead Tech Design <www.leadtechdesign.com> 5 * Copyright (C) 2008 Ronetix Ilko Iliev (www.ronetix.at) 6 * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 7 * 8 * See file CREDITS for list of people who contributed to this 9 * project. 10 * 11 * This program is free software; you can redistribute it and/or 12 * modify it under the terms of the GNU General Public License as 13 * published by the Free Software Foundation; either version 2 of 14 * the License, or (at your option) any later version. 15 * 16 * This program is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 * GNU General Public License for more details. 20 * 21 * You should have received a copy of the GNU General Public License 22 * along with this program; if not, write to the Free Software 23 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 24 * MA 02111-1307 USA 25 */ 26 27 #include <common.h> 28 #include <asm/sizes.h> 29 #include <asm/arch/at91sam9263.h> 30 #include <asm/arch/at91sam9_smc.h> 31 #include <asm/arch/at91_common.h> 32 #include <asm/arch/at91_pmc.h> 33 #include <asm/arch/at91_rstc.h> 34 #include <asm/arch/at91_matrix.h> 35 #include <asm/arch/at91_pio.h> 36 #include <asm/arch/clk.h> 37 #include <asm/arch/io.h> 38 #include <asm/arch/hardware.h> 39 #include <lcd.h> 40 #include <atmel_lcdc.h> 41 #include <dataflash.h> 42 #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) 43 #include <net.h> 44 #endif 45 #include <netdev.h> 46 47 DECLARE_GLOBAL_DATA_PTR; 48 49 /* ------------------------------------------------------------------------- */ 50 /* 51 * Miscelaneous platform dependent initialisations 52 */ 53 54 #ifdef CONFIG_CMD_NAND 55 static void pm9263_nand_hw_init(void) 56 { 57 unsigned long csa; 58 at91_smc_t *smc = (at91_smc_t *) AT91_SMC0_BASE; 59 at91_matrix_t *matrix = (at91_matrix_t *) AT91_MATRIX_BASE; 60 61 /* Enable CS3 */ 62 csa = readl(&matrix->csa[0]) | AT91_MATRIX_CSA_EBI_CS3A; 63 writel(csa, &matrix->csa[0]); 64 65 /* Configure SMC CS3 for NAND/SmartMedia */ 66 writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(1) | 67 AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(1), 68 &smc->cs[3].setup); 69 70 writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) | 71 AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3), 72 &smc->cs[3].pulse); 73 74 writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5), 75 &smc->cs[3].cycle); 76 77 writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | 78 AT91_SMC_MODE_EXNW_DISABLE | 79 #ifdef CONFIG_SYS_NAND_DBW_16 80 AT91_SMC_MODE_DBW_16 | 81 #else /* CONFIG_SYS_NAND_DBW_8 */ 82 AT91_SMC_MODE_DBW_8 | 83 #endif 84 AT91_SMC_MODE_TDF_CYCLE(2), 85 &smc->cs[3].mode); 86 87 /* Configure RDY/BSY */ 88 at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1); 89 90 /* Enable NandFlash */ 91 at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); 92 } 93 #endif 94 95 #ifdef CONFIG_MACB 96 static void pm9263_macb_hw_init(void) 97 { 98 at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; 99 100 /* 101 * PB27 enables the 50MHz oscillator for Ethernet PHY 102 * 1 - enable 103 * 0 - disable 104 */ 105 at91_set_pio_output(AT91_PIO_PORTB, 27, 1); 106 at91_set_pio_value(AT91_PIO_PORTB, 27, 1); /* 1- enable, 0 - disable */ 107 108 /* Enable clock */ 109 writel(1 << AT91SAM9263_ID_EMAC, &pmc->pcer); 110 111 /* 112 * Disable pull-up on: 113 * RXDV (PC25) => PHY normal mode (not Test mode) 114 * ERX0 (PE25) => PHY ADDR0 115 * ERX1 (PE26) => PHY ADDR1 => PHYADDR = 0x0 116 * 117 * PHY has internal pull-down 118 */ 119 120 at91_set_pio_pullup(AT91_PIO_PORTC, 25, 0); 121 at91_set_pio_pullup(AT91_PIO_PORTE, 25, 0); 122 at91_set_pio_pullup(AT91_PIO_PORTE, 26, 0); 123 124 /* Re-enable pull-up */ 125 at91_set_pio_pullup(AT91_PIO_PORTC, 25, 1); 126 at91_set_pio_pullup(AT91_PIO_PORTE, 25, 1); 127 at91_set_pio_pullup(AT91_PIO_PORTE, 26, 1); 128 129 at91_macb_hw_init(); 130 } 131 #endif 132 133 #ifdef CONFIG_LCD 134 vidinfo_t panel_info = { 135 vl_col: 240, 136 vl_row: 320, 137 vl_clk: 4965000, 138 vl_sync: ATMEL_LCDC_INVLINE_INVERTED | 139 ATMEL_LCDC_INVFRAME_INVERTED, 140 vl_bpix: 3, 141 vl_tft: 1, 142 vl_hsync_len: 5, 143 vl_left_margin: 1, 144 vl_right_margin:33, 145 vl_vsync_len: 1, 146 vl_upper_margin:1, 147 vl_lower_margin:0, 148 mmio: AT91SAM9263_LCDC_BASE, 149 }; 150 151 void lcd_enable(void) 152 { 153 at91_set_pio_value(AT91_PIO_PORTA, 22, 1); /* power up */ 154 } 155 156 void lcd_disable(void) 157 { 158 at91_set_pio_value(AT91_PIO_PORTA, 22, 0); /* power down */ 159 } 160 161 #ifdef CONFIG_LCD_IN_PSRAM 162 163 #define PSRAM_CRE_PIN AT91_PIO_PORTB, 29 164 #define PSRAM_CTRL_REG (PHYS_PSRAM + PHYS_PSRAM_SIZE - 2) 165 166 /* Initialize the PSRAM memory */ 167 static int pm9263_lcd_hw_psram_init(void) 168 { 169 volatile uint16_t x; 170 unsigned long csa; 171 at91_smc_t *smc = (at91_smc_t *) AT91_SMC1_BASE; 172 at91_matrix_t *matrix = (at91_matrix_t *) AT91_MATRIX_BASE; 173 174 /* Enable CS3 3.3v, no pull-ups */ 175 csa = readl(&matrix->csa[1]) | AT91_MATRIX_CSA_DBPUC | 176 AT91_MATRIX_CSA_VDDIOMSEL_3_3V; 177 178 writel(csa, &matrix->csa[1]); 179 180 /* Configure SMC1 CS0 for PSRAM - 16-bit */ 181 writel(AT91_SMC_SETUP_NWE(0) | AT91_SMC_SETUP_NCS_WR(0) | 182 AT91_SMC_SETUP_NRD(0) | AT91_SMC_SETUP_NCS_RD(0), 183 &smc->cs[0].setup); 184 185 writel(AT91_SMC_PULSE_NWE(7) | AT91_SMC_PULSE_NCS_WR(7) | 186 AT91_SMC_PULSE_NRD(2) | AT91_SMC_PULSE_NCS_RD(7), 187 &smc->cs[0].pulse); 188 189 writel(AT91_SMC_CYCLE_NWE(8) | AT91_SMC_CYCLE_NRD(8), 190 &smc->cs[0].cycle); 191 192 writel(AT91_SMC_MODE_DBW_16 | AT91_SMC_MODE_PMEN | AT91_SMC_MODE_PS_32, 193 &smc->cs[0].mode); 194 195 /* setup PB29 as output */ 196 at91_set_pio_output(PSRAM_CRE_PIN, 1); 197 198 at91_set_pio_value(PSRAM_CRE_PIN, 0); /* set PSRAM_CRE_PIN to '0' */ 199 200 /* PSRAM: write BCR */ 201 x = readw(PSRAM_CTRL_REG); 202 x = readw(PSRAM_CTRL_REG); 203 writew(1, PSRAM_CTRL_REG); /* 0 - RCR,1 - BCR */ 204 writew(0x9d4f, PSRAM_CTRL_REG); /* write the BCR */ 205 206 /* write RCR of the PSRAM */ 207 x = readw(PSRAM_CTRL_REG); 208 x = readw(PSRAM_CTRL_REG); 209 writew(0, PSRAM_CTRL_REG); /* 0 - RCR,1 - BCR */ 210 /* set RCR; 0x10-async mode,0x90-page mode */ 211 writew(0x90, PSRAM_CTRL_REG); 212 213 /* 214 * test to see if the PSRAM is MT45W2M16A or MT45W2M16B 215 * MT45W2M16B - CRE must be 0 216 * MT45W2M16A - CRE must be 1 217 */ 218 writew(0x1234, PHYS_PSRAM); 219 writew(0x5678, PHYS_PSRAM + 2); 220 221 /* test if the chip is MT45W2M16B */ 222 if ((readw(PHYS_PSRAM) != 0x1234) || (readw(PHYS_PSRAM+2) != 0x5678)) { 223 /* try with CRE=1 (MT45W2M16A) */ 224 at91_set_pio_value(PSRAM_CRE_PIN, 1); /* set PSRAM_CRE_PIN to '1' */ 225 226 /* write RCR of the PSRAM */ 227 x = readw(PSRAM_CTRL_REG); 228 x = readw(PSRAM_CTRL_REG); 229 writew(0, PSRAM_CTRL_REG); /* 0 - RCR,1 - BCR */ 230 /* set RCR;0x10-async mode,0x90-page mode */ 231 writew(0x90, PSRAM_CTRL_REG); 232 233 234 writew(0x1234, PHYS_PSRAM); 235 writew(0x5678, PHYS_PSRAM+2); 236 if ((readw(PHYS_PSRAM) != 0x1234) 237 || (readw(PHYS_PSRAM + 2) != 0x5678)) 238 return 1; 239 240 } 241 242 /* Bus matrix */ 243 writel(AT91_MATRIX_PRA_M5(3), &matrix->pr[5].a); 244 writel(CONFIG_PSRAM_SCFG, &matrix->scfg[5]); 245 246 return 0; 247 } 248 #endif 249 250 static void pm9263_lcd_hw_init(void) 251 { 252 at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; 253 254 at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDVSYNC */ 255 at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDHSYNC */ 256 at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDDOTCK */ 257 at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDDEN */ 258 at91_set_b_periph(AT91_PIO_PORTB, 9, 0); /* LCDCC */ 259 at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD2 */ 260 at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD3 */ 261 at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD4 */ 262 at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD5 */ 263 at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD6 */ 264 at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD7 */ 265 at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD10 */ 266 at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD11 */ 267 at91_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD12 */ 268 at91_set_b_periph(AT91_PIO_PORTC, 12, 0); /* LCDD13 */ 269 at91_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD14 */ 270 at91_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD15 */ 271 at91_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD18 */ 272 at91_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD19 */ 273 at91_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDD20 */ 274 at91_set_b_periph(AT91_PIO_PORTC, 17, 0); /* LCDD21 */ 275 at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDD22 */ 276 at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDD23 */ 277 278 writel(1 << AT91SAM9263_ID_LCDC, &pmc->pcer); 279 280 /* Power Control */ 281 at91_set_pio_output(AT91_PIO_PORTA, 22, 1); 282 at91_set_pio_value(AT91_PIO_PORTA, 22, 0); /* power down */ 283 284 #ifdef CONFIG_LCD_IN_PSRAM 285 /* initialize te PSRAM */ 286 int stat = pm9263_lcd_hw_psram_init(); 287 288 gd->fb_base = (stat == 0) ? PHYS_PSRAM : AT91SAM9263_SRAM0_BASE; 289 #else 290 gd->fb_base = AT91SAM9263_SRAM0_BASE; 291 #endif 292 293 } 294 295 #ifdef CONFIG_LCD_INFO 296 #include <nand.h> 297 #include <version.h> 298 299 extern flash_info_t flash_info[]; 300 301 void lcd_show_board_info(void) 302 { 303 ulong dram_size, nand_size, flash_size, dataflash_size; 304 int i; 305 char temp[32]; 306 307 lcd_printf ("%s\n", U_BOOT_VERSION); 308 lcd_printf ("(C) 2009 Ronetix GmbH\n"); 309 lcd_printf ("support@ronetix.at\n"); 310 lcd_printf ("%s CPU at %s MHz", 311 CONFIG_SYS_AT91_CPU_NAME, 312 strmhz(temp, get_cpu_clk_rate())); 313 314 dram_size = 0; 315 for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) 316 dram_size += gd->bd->bi_dram[i].size; 317 318 nand_size = 0; 319 for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) 320 nand_size += nand_info[i].size; 321 322 flash_size = 0; 323 for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) 324 flash_size += flash_info[i].size; 325 326 dataflash_size = 0; 327 for (i = 0; i < CONFIG_SYS_MAX_DATAFLASH_BANKS; i++) 328 dataflash_size += (unsigned int) dataflash_info[i].Device.pages_number * 329 dataflash_info[i].Device.pages_size; 330 331 lcd_printf ("%ld MB SDRAM, %ld MB NAND\n%ld MB NOR Flash\n" 332 "4 MB PSRAM, %ld MB DataFlash\n", 333 dram_size >> 20, 334 nand_size >> 20, 335 flash_size >> 20, 336 dataflash_size >> 20); 337 } 338 #endif /* CONFIG_LCD_INFO */ 339 340 #endif /* CONFIG_LCD */ 341 342 int board_init(void) 343 { 344 at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; 345 346 /* Enable Ctrlc */ 347 console_init_f(); 348 349 writel((1 << AT91SAM9263_ID_PIOA) | 350 (1 << AT91SAM9263_ID_PIOCDE) | 351 (1 << AT91SAM9263_ID_PIOB), 352 &pmc->pcer); 353 354 /* arch number of AT91SAM9263EK-Board */ 355 gd->bd->bi_arch_number = MACH_TYPE_PM9263; 356 357 /* adress of boot parameters */ 358 gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; 359 360 at91_serial_hw_init(); 361 #ifdef CONFIG_CMD_NAND 362 pm9263_nand_hw_init(); 363 #endif 364 #ifdef CONFIG_HAS_DATAFLASH 365 at91_spi0_hw_init(1 << 0); 366 #endif 367 #ifdef CONFIG_MACB 368 pm9263_macb_hw_init(); 369 #endif 370 #ifdef CONFIG_USB_OHCI_NEW 371 at91_uhp_hw_init(); 372 #endif 373 #ifdef CONFIG_LCD 374 pm9263_lcd_hw_init(); 375 #endif 376 return 0; 377 } 378 379 int dram_init(void) 380 { 381 gd->bd->bi_dram[0].start = PHYS_SDRAM; 382 gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; 383 return 0; 384 } 385 386 #ifdef CONFIG_RESET_PHY_R 387 void reset_phy(void) 388 { 389 } 390 #endif 391 392 int board_eth_init(bd_t *bis) 393 { 394 int rc = 0; 395 #ifdef CONFIG_MACB 396 rc = macb_eth_initialize(0, (void *)AT91_EMAC_BASE, 0x01); 397 #endif 398 return rc; 399 } 400 401 #ifdef CONFIG_DISPLAY_BOARDINFO 402 int checkboard (void) 403 { 404 char *ss; 405 406 printf ("Board : Ronetix PM9263\n"); 407 408 switch (gd->fb_base) { 409 case PHYS_PSRAM: 410 ss = "(PSRAM)"; 411 break; 412 413 case AT91SAM9263_SRAM0_BASE: 414 ss = "(Internal SRAM)"; 415 break; 416 417 default: 418 ss = ""; 419 break; 420 } 421 printf("Video memory : 0x%08lX %s\n", gd->fb_base, ss ); 422 423 printf ("\n"); 424 return 0; 425 } 426 #endif 427