1 /*
2  * Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #include <common.h>
8 #include <asm/io.h>
9 #include <asm/processor.h>
10 #include <asm/pci.h>
11 
12 #if defined(CONFIG_CPU_32BIT)
13 #define NOCACHE_OFFSET		0x00000000
14 #else
15 #define NOCACHE_OFFSET		0xa0000000
16 #endif
17 #define PLD_LEDCR		(0x04000008 + NOCACHE_OFFSET)
18 #define PLD_SWSR		(0x0400000a + NOCACHE_OFFSET)
19 #define PLD_VERSR		(0x0400000c + NOCACHE_OFFSET)
20 
21 #define SM107_DEVICEID		(0x13e00060 + NOCACHE_OFFSET)
22 
23 static void test_pld(void)
24 {
25 	printf("PLD version = %04x\n", readb(PLD_VERSR));
26 }
27 
28 static void test_sm107(void)
29 {
30 	printf("SM107 device ID = %04x\n", readl(SM107_DEVICEID));
31 }
32 
33 static void test_led(void)
34 {
35 	printf("turn on LEDs 3, 5, 7, 9\n");
36 	writeb(0x55, PLD_LEDCR);
37 	mdelay(2000);
38 	printf("turn on LEDs 4, 6, 8, 10\n");
39 	writeb(0xaa, PLD_LEDCR);
40 	mdelay(2000);
41 	writeb(0x00, PLD_LEDCR);
42 }
43 
44 static void test_dipsw(void)
45 {
46 	printf("Please DIPSW set = B'0101\n");
47 	while (readb(PLD_SWSR) != 0x05) {
48 		if (ctrlc())
49 			return;
50 	}
51 	printf("Please DIPSW set = B'1010\n");
52 	while (readb(PLD_SWSR) != 0x0A) {
53 		if (ctrlc())
54 			return;
55 	}
56 	printf("DIPSW OK\n");
57 }
58 
59 static void test_net(void)
60 {
61 	unsigned long data;
62 
63 	writel(0x80000000, 0xfe0401c0);
64 	data = readl(0xfe040220);
65 	if (data == 0x816910ec)
66 		printf("Ethernet OK\n");
67 	else
68 		printf("Ethernet NG, data = %08x\n", (unsigned int)data);
69 }
70 
71 static void test_sata(void)
72 {
73 	unsigned long data;
74 
75 	writel(0x80000800, 0xfe0401c0);
76 	data = readl(0xfe040220);
77 	if (data == 0x35121095)
78 		printf("SATA OK\n");
79 	else
80 		printf("SATA NG, data = %08x\n", (unsigned int)data);
81 }
82 
83 static void test_pci(void)
84 {
85 	writel(0x80001800, 0xfe0401c0);
86 	printf("PCI CN1 ID = %08x\n", readl(0xfe040220));
87 
88 	writel(0x80001000, 0xfe0401c0);
89 	printf("PCI CN2 ID = %08x\n", readl(0xfe040220));
90 }
91 
92 int do_hw_test(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
93 {
94 	char *cmd;
95 
96 	if (argc != 2)
97 		return cmd_usage(cmdtp);
98 
99 	cmd = argv[1];
100 	switch (cmd[0]) {
101 	case 'a':	/* all */
102 		test_pld();
103 		test_led();
104 		test_dipsw();
105 		test_sm107();
106 		test_net();
107 		test_sata();
108 		test_pci();
109 		break;
110 	case 'p':	/* pld or pci */
111 		if (cmd[1] == 'l')
112 			test_pld();
113 		else
114 			test_pci();
115 		break;
116 	case 'l':	/* led */
117 		test_led();
118 		break;
119 	case 'd':	/* dipsw */
120 		test_dipsw();
121 		break;
122 	case 's':	/* sm107 or sata */
123 		if (cmd[1] == 'm')
124 			test_sm107();
125 		else
126 			test_sata();
127 		break;
128 	case 'n':	/* net */
129 		test_net();
130 		break;
131 	default:
132 		return cmd_usage(cmdtp);
133 	}
134 
135 	return 0;
136 }
137 
138 U_BOOT_CMD(
139 	hwtest,	2,	1,	do_hw_test,
140 	"hardware test for R0P7785LC0011RL board",
141 	"\n"
142 	"hwtest all   - test all hardware\n"
143 	"hwtest pld   - output PLD version\n"
144 	"hwtest led   - turn on LEDs\n"
145 	"hwtest dipsw - test DIP switch\n"
146 	"hwtest sm107 - output SM107 version\n"
147 	"hwtest net   - check RTL8110 ID\n"
148 	"hwtest sata  - check SiI3512 ID\n"
149 	"hwtest pci   - output PCI slot device ID"
150 );
151