1========================================
2Renesas R0P7757LC0030RL board
3========================================
4
5This board specification:
6=========================
7
8The R0P7757LC0030RL(board config name:sh7757lcr) has the following device:
9
10 - SH7757 (SH-4A)
11 - DDR3-SDRAM 256MB (with ECC)
12 - SPI ROM 8MB
13 - 2D Graphic controller
14 - Ethernet controller
15 - eMMC 2GB
16
17
18configuration for This board:
19=============================
20
21You can select the configuration as follows:
22
23 - make sh7785lcr_config
24
25
26This board specific command:
27============================
28
29This board has the following its specific command:
30
31 - sh_g200
32 - write_mac
33
34
351. sh_g200
36
37If we run this command, SH4 can control the G200.
38The default setting is that SH4 cannot control the G200.
39
40
412. write_mac
42
43You can write MAC address to SPI ROM.
44
45 Usage 1) Write MAC address
46
47   write_mac [ETHERC ch0] [ETHERC ch1] [GETHERC ch0] [GETHERC ch1]
48
49	For example)
50	 => write_mac 00:00:87:6c:21:80 00:00:87:6c:21:81 00:00:87:6c:21:82 00:00:87:6c:21:83
51		*) We have to input the command as a single line
52		   (without carriage return)
53		*) We have to reset after input the command.
54
55 Usage 2) Show current data
56
57   write_mac
58
59	For example)
60		=> write_mac
61		 ETHERC ch0 = 00:00:87:6c:21:80
62		 ETHERC ch1 = 00:00:87:6c:21:81
63		GETHERC ch0 = 00:00:87:6c:21:82
64		GETHERC ch1 = 00:00:87:6c:21:83
65
66
67Update SPI ROM:
68============================
69
701. Copy u-boot image to RAM area.
712. Probe SPI device.
72   => sf probe 0
73   8192 KiB M25P64 at 0:0 is now current device
743. Erase SPI ROM.
75   => sf erase 0 80000
764. Write u-boot image to SPI ROM.
77   => sf write 0x89000000 0 80000
78