1 /* 2 * board/renesas/gose/gose.c 3 * 4 * Copyright (C) 2014 Renesas Electronics Corporation 5 * 6 * SPDX-License-Identifier: GPL-2.0 7 */ 8 9 #include <common.h> 10 #include <malloc.h> 11 #include <dm.h> 12 #include <dm/platform_data/serial_sh.h> 13 #include <asm/processor.h> 14 #include <asm/mach-types.h> 15 #include <asm/io.h> 16 #include <asm/errno.h> 17 #include <asm/arch/sys_proto.h> 18 #include <asm/gpio.h> 19 #include <asm/arch/rmobile.h> 20 #include <asm/arch/rcar-mstp.h> 21 #include <asm/arch/sh_sdhi.h> 22 #include <netdev.h> 23 #include <miiphy.h> 24 #include <i2c.h> 25 #include "qos.h" 26 27 DECLARE_GLOBAL_DATA_PTR; 28 29 #define CLK2MHZ(clk) (clk / 1000 / 1000) 30 void s_init(void) 31 { 32 struct rcar_rwdt *rwdt = (struct rcar_rwdt *)RWDT_BASE; 33 struct rcar_swdt *swdt = (struct rcar_swdt *)SWDT_BASE; 34 u32 stc; 35 36 /* Watchdog init */ 37 writel(0xA5A5A500, &rwdt->rwtcsra); 38 writel(0xA5A5A500, &swdt->swtcsra); 39 40 /* CPU frequency setting. Set to 1.5GHz */ 41 stc = ((1500 / CLK2MHZ(CONFIG_SYS_CLK_FREQ)) - 1) << PLL0_STC_BIT; 42 clrsetbits_le32(PLL0CR, PLL0_STC_MASK, stc); 43 44 /* QoS */ 45 qos_init(); 46 } 47 48 #define TMU0_MSTP125 (1 << 25) 49 #define SCIF0_MSTP721 (1 << 21) 50 #define ETHER_MSTP813 (1 << 13) 51 52 #define SDHI0_MSTP314 (1 << 14) 53 #define SDHI1_MSTP312 (1 << 12) 54 #define SDHI2_MSTP311 (1 << 11) 55 56 #define SD1CKCR 0xE6150078 57 #define SD2CKCR 0xE615026C 58 #define SD_97500KHZ 0x7 59 60 int board_early_init_f(void) 61 { 62 /* TMU0 */ 63 mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125); 64 65 /* SCIF0 */ 66 mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF0_MSTP721); 67 68 /* ETHER */ 69 mstp_clrbits_le32(MSTPSR8, SMSTPCR8, ETHER_MSTP813); 70 71 /* SDHI */ 72 mstp_clrbits_le32(MSTPSR3, SMSTPCR3, 73 SDHI0_MSTP314 | SDHI1_MSTP312 | SDHI2_MSTP311); 74 writel(SD_97500KHZ, SD1CKCR); 75 writel(SD_97500KHZ, SD2CKCR); 76 77 return 0; 78 } 79 80 #define PUPR5 0xE6060114 81 #define PUPR5_ETH 0x3FFC0000 82 #define PUPR5_ETH_MAGIC (1 << 27) 83 84 int board_init(void) 85 { 86 /* adress of boot parameters */ 87 gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; 88 89 /* Init PFC controller */ 90 r8a7793_pinmux_init(); 91 92 /* ETHER Enable */ 93 gpio_request(GPIO_FN_ETH_CRS_DV, NULL); 94 gpio_request(GPIO_FN_ETH_RX_ER, NULL); 95 gpio_request(GPIO_FN_ETH_RXD0, NULL); 96 gpio_request(GPIO_FN_ETH_RXD1, NULL); 97 gpio_request(GPIO_FN_ETH_LINK, NULL); 98 gpio_request(GPIO_FN_ETH_REFCLK, NULL); 99 gpio_request(GPIO_FN_ETH_MDIO, NULL); 100 gpio_request(GPIO_FN_ETH_TXD1, NULL); 101 gpio_request(GPIO_FN_ETH_TX_EN, NULL); 102 gpio_request(GPIO_FN_ETH_TXD0, NULL); 103 gpio_request(GPIO_FN_ETH_MDC, NULL); 104 gpio_request(GPIO_FN_IRQ0, NULL); 105 106 mstp_clrbits_le32(PUPR5, PUPR5, PUPR5_ETH & ~PUPR5_ETH_MAGIC); 107 gpio_request(GPIO_GP_5_22, NULL); /* PHY_RST */ 108 mstp_clrbits_le32(PUPR5, PUPR5, PUPR5_ETH_MAGIC); 109 110 gpio_direction_output(GPIO_GP_5_22, 0); 111 mdelay(20); 112 gpio_set_value(GPIO_GP_5_22, 1); 113 udelay(1); 114 115 return 0; 116 } 117 118 #define CXR24 0xEE7003C0 /* MAC address high register */ 119 #define CXR25 0xEE7003C8 /* MAC address low register */ 120 121 int board_eth_init(bd_t *bis) 122 { 123 int ret = -ENODEV; 124 u32 val; 125 unsigned char enetaddr[6]; 126 127 #ifdef CONFIG_SH_ETHER 128 ret = sh_eth_initialize(bis); 129 if (!eth_getenv_enetaddr("ethaddr", enetaddr)) 130 return ret; 131 132 /* Set Mac address */ 133 val = enetaddr[0] << 24 | enetaddr[1] << 16 | 134 enetaddr[2] << 8 | enetaddr[3]; 135 writel(val, CXR24); 136 137 val = enetaddr[4] << 8 | enetaddr[5]; 138 writel(val, CXR25); 139 #endif 140 141 return ret; 142 } 143 144 int board_mmc_init(bd_t *bis) 145 { 146 int ret = -ENODEV; 147 148 #ifdef CONFIG_SH_SDHI 149 gpio_request(GPIO_FN_SD0_DATA0, NULL); 150 gpio_request(GPIO_FN_SD0_DATA1, NULL); 151 gpio_request(GPIO_FN_SD0_DATA2, NULL); 152 gpio_request(GPIO_FN_SD0_DATA3, NULL); 153 gpio_request(GPIO_FN_SD0_CLK, NULL); 154 gpio_request(GPIO_FN_SD0_CMD, NULL); 155 gpio_request(GPIO_FN_SD0_CD, NULL); 156 gpio_request(GPIO_FN_SD2_DATA0, NULL); 157 gpio_request(GPIO_FN_SD2_DATA1, NULL); 158 gpio_request(GPIO_FN_SD2_DATA2, NULL); 159 gpio_request(GPIO_FN_SD2_DATA3, NULL); 160 gpio_request(GPIO_FN_SD2_CLK, NULL); 161 gpio_request(GPIO_FN_SD2_CMD, NULL); 162 gpio_request(GPIO_FN_SD2_CD, NULL); 163 164 /* SDHI 0 */ 165 gpio_request(GPIO_GP_7_17, NULL); 166 gpio_request(GPIO_GP_2_12, NULL); 167 gpio_direction_output(GPIO_GP_7_17, 1); /* power on */ 168 gpio_direction_output(GPIO_GP_2_12, 1); /* 1: 3.3V, 0: 1.8V */ 169 170 ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI0_BASE, 0, 171 SH_SDHI_QUIRK_16BIT_BUF); 172 if (ret) 173 return ret; 174 175 /* SDHI 1 */ 176 gpio_request(GPIO_GP_7_18, NULL); 177 gpio_request(GPIO_GP_2_13, NULL); 178 gpio_direction_output(GPIO_GP_7_18, 1); /* power on */ 179 gpio_direction_output(GPIO_GP_2_13, 1); /* 1: 3.3V, 0: 1.8V */ 180 181 ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI1_BASE, 1, 0); 182 if (ret) 183 return ret; 184 185 /* SDHI 2 */ 186 gpio_request(GPIO_GP_7_19, NULL); 187 gpio_request(GPIO_GP_2_26, NULL); 188 gpio_direction_output(GPIO_GP_7_19, 1); /* power on */ 189 gpio_direction_output(GPIO_GP_2_26, 1); /* 1: 3.3V, 0: 1.8V */ 190 191 ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI2_BASE, 2, 0); 192 #endif 193 return ret; 194 } 195 196 int dram_init(void) 197 { 198 gd->ram_size = CONFIG_SYS_SDRAM_SIZE; 199 200 return 0; 201 } 202 203 const struct rmobile_sysinfo sysinfo = { 204 CONFIG_RMOBILE_BOARD_STRING 205 }; 206 207 void reset_cpu(ulong addr) 208 { 209 u8 val; 210 211 i2c_set_bus_num(2); /* PowerIC connected to ch2 */ 212 i2c_read(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1); 213 val |= 0x02; 214 i2c_write(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1); 215 } 216 217 static const struct sh_serial_platdata serial_platdata = { 218 .base = SCIF0_BASE, 219 .type = PORT_SCIF, 220 .clk = 14745600, 221 .clk_mode = EXT_CLK, 222 }; 223 224 U_BOOT_DEVICE(gose_serials) = { 225 .name = "serial_sh", 226 .platdata = &serial_platdata, 227 }; 228