1 /* 2 * Copyright (c) 2014 DENX 3 * Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr> 4 * 5 * Derived from code written by Robert Aigner (ra@spiid.net) 6 * 7 * Itself derived from Beagle Board and 3430 SDP code by 8 * Richard Woodruff <r-woodruff2@ti.com> 9 * Syed Mohammed Khasim <khasim@ti.com> 10 * 11 * SPDX-License-Identifier: GPL-2.0+ 12 */ 13 #include <common.h> 14 #include <dm.h> 15 #include <netdev.h> 16 #include <ns16550.h> 17 #include <asm/io.h> 18 #include <asm/arch/mem.h> 19 #include <asm/arch/mux.h> 20 #include <asm/arch/sys_proto.h> 21 #include <i2c.h> 22 #include <asm/mach-types.h> 23 #include <asm/omap_mmc.h> 24 #include "cairo.h" 25 26 DECLARE_GLOBAL_DATA_PTR; 27 28 /* 29 * MUSB port on OMAP3EVM Rev >= E requires extvbus programming. 30 */ 31 u8 omap3_evm_need_extvbus(void) 32 { 33 u8 retval = 0; 34 35 /* TODO: verify if cairo handheld platform needs extvbus programming */ 36 37 return retval; 38 } 39 40 /* 41 * Routine: board_init 42 * Description: Early hardware init. 43 */ 44 int board_init(void) 45 { 46 gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ 47 /* board id for Linux */ 48 gd->bd->bi_arch_number = CONFIG_MACH_TYPE; 49 /* boot param addr */ 50 gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); 51 return 0; 52 } 53 54 /* 55 * Routine: set_muxconf_regs 56 * Description: Setting up the configuration Mux registers specific to the 57 * hardware. Many pins need to be moved from protect to primary 58 * mode. 59 */ 60 void set_muxconf_regs(void) 61 { 62 MUX_CAIRO(); 63 } 64 65 #if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) 66 int board_mmc_init(bd_t *bis) 67 { 68 return omap_mmc_init(0, 0, 0, -1, -1); 69 } 70 #endif 71 72 #ifdef CONFIG_SPL_BUILD 73 /* 74 * Routine: get_board_mem_timings 75 * Description: If we use SPL then there is no x-loader nor config header 76 * so we have to setup the DDR timings ourself on the first bank. This 77 * provides the timing values back to the function that configures 78 * the memory. 79 * 80 * The Cairo board uses SAMSUNG DDR - K4X51163PG-FGC6 81 */ 82 void get_board_mem_timings(struct board_sdrc_timings *timings) 83 { 84 timings->sharing = SAMSUNG_SHARING; 85 timings->mcfg = SAMSUNG_V_MCFG_165(128 << 20); 86 timings->ctrla = SAMSUNG_V_ACTIMA_165; 87 timings->ctrlb = SAMSUNG_V_ACTIMB_165; 88 timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; 89 timings->mr = SAMSUNG_V_MR_165; 90 } 91 #endif 92 93 static const struct ns16550_platdata cairo_serial = { 94 .base = OMAP34XX_UART2, 95 .reg_shift = 2, 96 .clock = V_NS16550_CLK, 97 .fcr = UART_FCR_DEFVAL, 98 }; 99 100 U_BOOT_DEVICE(cairo_uart) = { 101 "ns16550_serial", 102 &cairo_serial 103 }; 104 105 /* force SPL booting into U-Boot, not Linux */ 106 #ifdef CONFIG_SPL_OS_BOOT 107 int spl_start_uboot(void) 108 { 109 return 1; 110 } 111 #endif 112