1*83605d37SStefano BabicBoard information 2*83605d37SStefano Babic----------------- 3*83605d37SStefano Babic 4*83605d37SStefano BabicThe evaluation board "pbab01" is thought to be used 5*83605d37SStefano Babictogether with the SOM. 6*83605d37SStefano Babic 7*83605d37SStefano BabicMore information on the board can be found on manufacturer's 8*83605d37SStefano Babicwebsite: 9*83605d37SStefano Babic 10*83605d37SStefano Babichttp://www.phytec.de/produkt/system-on-modules/phyflex-imx-6/ 11*83605d37SStefano Babic 12*83605d37SStefano BabicBuilding U-Boot 13*83605d37SStefano Babic------------------------------- 14*83605d37SStefano Babic 15*83605d37SStefano Babic$ make pfla02_defconfig 16*83605d37SStefano Babic$ make 17*83605d37SStefano Babic 18*83605d37SStefano BabicThis generates the artifacts SPL and u-boot.img. 19*83605d37SStefano BabicThe SOM can boot from NAND or from SD-Card, having the SPI-NOR 20*83605d37SStefano Babicas second option. 21*83605d37SStefano BabicThe dip switch "SW3" on the board let choose the boot device. 22*83605d37SStefano Babic 23*83605d37SStefano BabicSW3_1(on), SW3_2(on), SW3_3(off): Boot first from SD, then try SPI 24*83605d37SStefano BabicSW3_1(off), SW3_2(on), SW3_3(off): Boot from SPI 25