1 /* 2 * Maintainer : Steve Sakoman <steve@sakoman.com> 3 * 4 * Derived from Beagle Board, 3430 SDP, and OMAP3EVM code by 5 * Richard Woodruff <r-woodruff2@ti.com> 6 * Syed Mohammed Khasim <khasim@ti.com> 7 * Sunil Kumar <sunilsaini05@gmail.com> 8 * Shashi Ranjan <shashiranjanmca05@gmail.com> 9 * 10 * (C) Copyright 2004-2008 11 * Texas Instruments, <www.ti.com> 12 * 13 * See file CREDITS for list of people who contributed to this 14 * project. 15 * 16 * This program is free software; you can redistribute it and/or 17 * modify it under the terms of the GNU General Public License as 18 * published by the Free Software Foundation; either version 2 of 19 * the License, or (at your option) any later version. 20 * 21 * This program is distributed in the hope that it will be useful, 22 * but WITHOUT ANY WARRANTY; without even the implied warranty of 23 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 24 * GNU General Public License for more details. 25 * 26 * You should have received a copy of the GNU General Public License 27 * along with this program; if not, write to the Free Software 28 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 29 * MA 02111-1307 USA 30 */ 31 #include <common.h> 32 #include <netdev.h> 33 #include <twl4030.h> 34 #include <asm/io.h> 35 #include <asm/arch/mmc_host_def.h> 36 #include <asm/arch/mux.h> 37 #include <asm/arch/mem.h> 38 #include <asm/arch/sys_proto.h> 39 #include <asm/arch/gpio.h> 40 #include <asm/mach-types.h> 41 #include "overo.h" 42 43 DECLARE_GLOBAL_DATA_PTR; 44 45 #define TWL4030_I2C_BUS 0 46 #define EXPANSION_EEPROM_I2C_BUS 2 47 #define EXPANSION_EEPROM_I2C_ADDRESS 0x51 48 49 #define GUMSTIX_SUMMIT 0x01000200 50 #define GUMSTIX_TOBI 0x02000200 51 #define GUMSTIX_TOBI_DUO 0x03000200 52 #define GUMSTIX_PALO35 0x04000200 53 #define GUMSTIX_PALO43 0x05000200 54 #define GUMSTIX_CHESTNUT43 0x06000200 55 #define GUMSTIX_PINTO 0x07000200 56 #define GUMSTIX_GALLOP43 0x08000200 57 58 #define ETTUS_USRP_E 0x01000300 59 60 #define GUMSTIX_NO_EEPROM 0xffffffff 61 62 static struct { 63 unsigned int device_vendor; 64 unsigned char revision; 65 unsigned char content; 66 char fab_revision[8]; 67 char env_var[16]; 68 char env_setting[64]; 69 } expansion_config; 70 71 #if defined(CONFIG_CMD_NET) 72 static void setup_net_chip(void); 73 #endif 74 75 /* GPMC definitions for LAN9221 chips on Tobi expansion boards */ 76 static const u32 gpmc_lan_config[] = { 77 NET_LAN9221_GPMC_CONFIG1, 78 NET_LAN9221_GPMC_CONFIG2, 79 NET_LAN9221_GPMC_CONFIG3, 80 NET_LAN9221_GPMC_CONFIG4, 81 NET_LAN9221_GPMC_CONFIG5, 82 NET_LAN9221_GPMC_CONFIG6, 83 /*CONFIG7- computed as params */ 84 }; 85 86 /* 87 * Routine: board_init 88 * Description: Early hardware init. 89 */ 90 int board_init(void) 91 { 92 gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ 93 /* board id for Linux */ 94 gd->bd->bi_arch_number = MACH_TYPE_OVERO; 95 /* boot param addr */ 96 gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); 97 98 return 0; 99 } 100 101 /* 102 * Routine: get_board_revision 103 * Description: Returns the board revision 104 */ 105 int get_board_revision(void) 106 { 107 int revision; 108 109 if (!omap_request_gpio(112) && 110 !omap_request_gpio(113) && 111 !omap_request_gpio(115)) { 112 113 omap_set_gpio_direction(112, 1); 114 omap_set_gpio_direction(113, 1); 115 omap_set_gpio_direction(115, 1); 116 117 revision = omap_get_gpio_datain(115) << 2 | 118 omap_get_gpio_datain(113) << 1 | 119 omap_get_gpio_datain(112); 120 121 omap_free_gpio(112); 122 omap_free_gpio(113); 123 omap_free_gpio(115); 124 } else { 125 printf("Error: unable to acquire board revision GPIOs\n"); 126 revision = -1; 127 } 128 129 return revision; 130 } 131 132 /* 133 * Routine: get_sdio2_config 134 * Description: Return information about the wifi module connection 135 * Returns 0 if the module connects though a level translator 136 * Returns 1 if the module connects directly 137 */ 138 int get_sdio2_config(void) 139 { 140 int sdio_direct; 141 142 if (!omap_request_gpio(130) && !omap_request_gpio(139)) { 143 144 omap_set_gpio_direction(130, 0); 145 omap_set_gpio_direction(139, 1); 146 147 sdio_direct = 1; 148 omap_set_gpio_dataout(130, 0); 149 if (omap_get_gpio_datain(139) == 0) { 150 omap_set_gpio_dataout(130, 1); 151 if (omap_get_gpio_datain(139) == 1) 152 sdio_direct = 0; 153 } 154 155 omap_free_gpio(130); 156 omap_free_gpio(139); 157 } else { 158 printf("Error: unable to acquire sdio2 clk GPIOs\n"); 159 sdio_direct = -1; 160 } 161 162 return sdio_direct; 163 } 164 165 /* 166 * Routine: get_expansion_id 167 * Description: This function checks for expansion board by checking I2C 168 * bus 2 for the availability of an AT24C01B serial EEPROM. 169 * returns the device_vendor field from the EEPROM 170 */ 171 unsigned int get_expansion_id(void) 172 { 173 i2c_set_bus_num(EXPANSION_EEPROM_I2C_BUS); 174 175 /* return GUMSTIX_NO_EEPROM if eeprom doesn't respond */ 176 if (i2c_probe(EXPANSION_EEPROM_I2C_ADDRESS) == 1) { 177 i2c_set_bus_num(TWL4030_I2C_BUS); 178 return GUMSTIX_NO_EEPROM; 179 } 180 181 /* read configuration data */ 182 i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 1, (u8 *)&expansion_config, 183 sizeof(expansion_config)); 184 185 i2c_set_bus_num(TWL4030_I2C_BUS); 186 187 return expansion_config.device_vendor; 188 } 189 190 /* 191 * Routine: misc_init_r 192 * Description: Configure board specific parts 193 */ 194 int misc_init_r(void) 195 { 196 twl4030_power_init(); 197 twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON); 198 199 #if defined(CONFIG_CMD_NET) 200 setup_net_chip(); 201 #endif 202 203 printf("Board revision: %d\n", get_board_revision()); 204 205 switch (get_sdio2_config()) { 206 case 0: 207 printf("Tranceiver detected on mmc2\n"); 208 MUX_OVERO_SDIO2_TRANSCEIVER(); 209 break; 210 case 1: 211 printf("Direct connection on mmc2\n"); 212 MUX_OVERO_SDIO2_DIRECT(); 213 break; 214 default: 215 printf("Unable to detect mmc2 connection type\n"); 216 } 217 218 switch (get_expansion_id()) { 219 case GUMSTIX_SUMMIT: 220 printf("Recognized Summit expansion board (rev %d %s)\n", 221 expansion_config.revision, 222 expansion_config.fab_revision); 223 setenv("defaultdisplay", "dvi"); 224 break; 225 case GUMSTIX_TOBI: 226 printf("Recognized Tobi expansion board (rev %d %s)\n", 227 expansion_config.revision, 228 expansion_config.fab_revision); 229 setenv("defaultdisplay", "dvi"); 230 break; 231 case GUMSTIX_TOBI_DUO: 232 printf("Recognized Tobi Duo expansion board (rev %d %s)\n", 233 expansion_config.revision, 234 expansion_config.fab_revision); 235 break; 236 case GUMSTIX_PALO35: 237 printf("Recognized Palo35 expansion board (rev %d %s)\n", 238 expansion_config.revision, 239 expansion_config.fab_revision); 240 setenv("defaultdisplay", "lcd35"); 241 break; 242 case GUMSTIX_PALO43: 243 printf("Recognized Palo43 expansion board (rev %d %s)\n", 244 expansion_config.revision, 245 expansion_config.fab_revision); 246 setenv("defaultdisplay", "lcd43"); 247 break; 248 case GUMSTIX_CHESTNUT43: 249 printf("Recognized Chestnut43 expansion board (rev %d %s)\n", 250 expansion_config.revision, 251 expansion_config.fab_revision); 252 setenv("defaultdisplay", "lcd43"); 253 break; 254 case GUMSTIX_PINTO: 255 printf("Recognized Pinto expansion board (rev %d %s)\n", 256 expansion_config.revision, 257 expansion_config.fab_revision); 258 break; 259 case GUMSTIX_GALLOP43: 260 printf("Recognized Gallop43 expansion board (rev %d %s)\n", 261 expansion_config.revision, 262 expansion_config.fab_revision); 263 setenv("defaultdisplay", "lcd43"); 264 break; 265 case ETTUS_USRP_E: 266 printf("Recognized Ettus Research USRP-E (rev %d %s)\n", 267 expansion_config.revision, 268 expansion_config.fab_revision); 269 MUX_USRP_E(); 270 setenv("defaultdisplay", "dvi"); 271 break; 272 case GUMSTIX_NO_EEPROM: 273 printf("No EEPROM on expansion board\n"); 274 break; 275 default: 276 printf("Unrecognized expansion board\n"); 277 } 278 279 if (expansion_config.content == 1) 280 setenv(expansion_config.env_var, expansion_config.env_setting); 281 282 dieid_num_r(); 283 284 return 0; 285 } 286 287 /* 288 * Routine: set_muxconf_regs 289 * Description: Setting up the configuration Mux registers specific to the 290 * hardware. Many pins need to be moved from protect to primary 291 * mode. 292 */ 293 void set_muxconf_regs(void) 294 { 295 MUX_OVERO(); 296 } 297 298 #if defined(CONFIG_CMD_NET) 299 /* 300 * Routine: setup_net_chip 301 * Description: Setting up the configuration GPMC registers specific to the 302 * Ethernet hardware. 303 */ 304 static void setup_net_chip(void) 305 { 306 struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE; 307 308 /* first lan chip */ 309 enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[5], 0x2C000000, 310 GPMC_SIZE_16M); 311 312 /* second lan chip */ 313 enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[4], 0x2B000000, 314 GPMC_SIZE_16M); 315 316 /* Enable off mode for NWE in PADCONF_GPMC_NWE register */ 317 writew(readw(&ctrl_base ->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe); 318 /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */ 319 writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe); 320 /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */ 321 writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00, 322 &ctrl_base->gpmc_nadv_ale); 323 324 /* Make GPIO 64 as output pin and send a magic pulse through it */ 325 if (!omap_request_gpio(64)) { 326 omap_set_gpio_direction(64, 0); 327 omap_set_gpio_dataout(64, 1); 328 udelay(1); 329 omap_set_gpio_dataout(64, 0); 330 udelay(1); 331 omap_set_gpio_dataout(64, 1); 332 } 333 } 334 #endif 335 336 int board_eth_init(bd_t *bis) 337 { 338 int rc = 0; 339 #ifdef CONFIG_SMC911X 340 rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); 341 #endif 342 return rc; 343 } 344 345 #ifdef CONFIG_GENERIC_MMC 346 int board_mmc_init(bd_t *bis) 347 { 348 omap_mmc_init(0); 349 return 0; 350 } 351 #endif 352