1 /*
2  *  (C) Copyright 2010,2011
3  *  NVIDIA Corporation <www.nvidia.com>
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 
8 #include <common.h>
9 #include <asm/io.h>
10 #include <asm/arch/tegra.h>
11 #include <asm/arch-tegra/board.h>
12 #include <asm/arch/clock.h>
13 #include <asm/arch/funcmux.h>
14 #include <asm/arch/gpio.h>
15 #include <asm/arch/pinmux.h>
16 #include <asm/gpio.h>
17 
18 /* TODO: Remove this code when the SPI switch is working */
19 #if (CONFIG_MACH_TYPE != MACH_TYPE_VENTANA)
20 void gpio_early_init_uart(void)
21 {
22 	/* Enable UART via GPIO_PI3 (port 8, bit 3) so serial console works */
23 	gpio_request(TEGRA_GPIO(I, 3), "uart_en");
24 	gpio_direction_output(TEGRA_GPIO(I, 3), 0);
25 }
26 #endif
27 
28 #ifdef CONFIG_TEGRA_MMC
29 /*
30  * Routine: pin_mux_mmc
31  * Description: setup the pin muxes/tristate values for the SDMMC(s)
32  */
33 void pin_mux_mmc(void)
34 {
35 	funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT);
36 	funcmux_select(PERIPH_ID_SDMMC3, FUNCMUX_SDMMC3_SDB_4BIT);
37 
38 	/* For power GPIO PI6 */
39 	pinmux_tristate_disable(PMUX_PINGRP_ATA);
40 	/* For CD GPIO PI5 */
41 	pinmux_tristate_disable(PMUX_PINGRP_ATC);
42 }
43 #endif
44 
45 void pin_mux_usb(void)
46 {
47 	/* For USB0's GPIO PD0. For now, since we have no pinmux in fdt */
48 	pinmux_tristate_disable(PMUX_PINGRP_SLXK);
49 	/* For USB1's ULPI signals */
50 	funcmux_select(PERIPH_ID_USB2, FUNCMUX_USB2_ULPI);
51 	pinmux_set_func(PMUX_PINGRP_CDEV2, PMUX_FUNC_PLLP_OUT4);
52 	pinmux_tristate_disable(PMUX_PINGRP_CDEV2);
53 	/* USB1 PHY reset GPIO */
54 	pinmux_tristate_disable(PMUX_PINGRP_UAC);
55 }
56