1 /* 2 * (C) Copyright 2010,2011 3 * NVIDIA Corporation <www.nvidia.com> 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #include <common.h> 9 #include <asm/io.h> 10 #include <asm/arch/tegra.h> 11 #include <asm/arch-tegra/board.h> 12 #include <asm/arch/clock.h> 13 #include <asm/arch/funcmux.h> 14 #include <asm/arch/gpio.h> 15 #include <asm/arch/pinmux.h> 16 #include <asm/gpio.h> 17 18 /* TODO: Remove this code when the SPI switch is working */ 19 #if (CONFIG_MACH_TYPE != MACH_TYPE_VENTANA) 20 void gpio_early_init_uart(void) 21 { 22 /* Enable UART via GPIO_PI3 (port 8, bit 3) so serial console works */ 23 gpio_request(TEGRA_GPIO(I, 3), "uart_en"); 24 gpio_direction_output(TEGRA_GPIO(I, 3), 0); 25 } 26 #endif 27 28 #ifdef CONFIG_TEGRA_MMC 29 /* 30 * Routine: pin_mux_mmc 31 * Description: setup the pin muxes/tristate values for the SDMMC(s) 32 */ 33 void pin_mux_mmc(void) 34 { 35 funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT); 36 funcmux_select(PERIPH_ID_SDMMC3, FUNCMUX_SDMMC3_SDB_4BIT); 37 38 /* For power GPIO PI6 */ 39 pinmux_tristate_disable(PMUX_PINGRP_ATA); 40 /* For CD GPIO PI5 */ 41 pinmux_tristate_disable(PMUX_PINGRP_ATC); 42 } 43 #endif 44 45 void pin_mux_usb(void) 46 { 47 /* For USB0's GPIO PD0. For now, since we have no pinmux in fdt */ 48 pinmux_tristate_disable(PMUX_PINGRP_SLXK); 49 /* For USB1's ULPI signals */ 50 funcmux_select(PERIPH_ID_USB2, FUNCMUX_USB2_ULPI); 51 pinmux_set_func(PMUX_PINGRP_CDEV2, PMUX_FUNC_PLLP_OUT4); 52 pinmux_tristate_disable(PMUX_PINGRP_CDEV2); 53 /* USB1 PHY reset GPIO */ 54 pinmux_tristate_disable(PMUX_PINGRP_UAC); 55 } 56