1/* 2 * (C) Copyright 2008 3 * Mark Jonas <mark.jonas@de.bosch.com> 4 * 5 * (C) Copyright 2007 6 * Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> 7 * 8 * board/mpr2/lowlevel_init.S 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License as 12 * published by the Free Software Foundation; either version 2 of 13 * the License, or (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 23 * MA 02111-1307 USA 24 */ 25#include <asm/macro.h> 26 27 .global lowlevel_init 28 29 .text 30 .align 2 31 32lowlevel_init: 33 34/* 35 * Set frequency multipliers and dividers in FRQCR. 36 */ 37 write16 WTCSR_A, WTCSR_D 38 39 write16 WTCNT_A, WTCNT_D 40 41 write16 FRQCR_A, FRQCR_D 42 43/* 44 * Setup CS0 (Flash). 45 */ 46 write32 CS0BCR_A, CS0BCR_D 47 48 write32 CS0WCR_A, CS0WCR_D 49 50/* 51 * Setup CS3 (SDRAM). 52 */ 53 write32 CS3BCR_A, CS3BCR_D 54 55 write32 CS3WCR_A, CS3WCR_D 56 57 write32 SDCR_A, SDCR_D1 58 59 write32 RTCSR_A, RTCSR_D 60 61 write32 RTCNT_A, RTCNT_D 62 63 write32 RTCOR_A, RTCOR_D 64 65 write32 SDCR_A, SDCR_D2 66 67 mov.l SDMR3_A, r1 68 mov.l SDMR3_D, r0 69 add r0, r1 70 mov #0, r0 71 mov.w r0, @r1 72 73 rts 74 nop 75 76 .align 4 77 78/* 79 * Configuration for MPR2 A.3 through A.7 80 */ 81 82/* 83 * PLL Settings 84 */ 85FRQCR_D: .long 0x1103 /* I:B:P=8:4:2 */ 86WTCNT_D: .long 0x5A00 /* start counting at zero */ 87WTCSR_D: .long 0xA507 /* divide by 4096 */ 88 89/* 90 * Spansion S29GL256N11 @ 48 MHz 91 */ 92/* 1 idle cycle inserted, normal space, 16 bit */ 93CS0BCR_D: .long 0x12490400 94/* tSW=0.5ck, 6 wait cycles, NO external wait, tHW=0.5ck */ 95CS0WCR_D: .long 0x00000340 96 97/* 98 * Samsung K4S511632B-UL75 @ 48 MHz 99 * Micron MT48LC32M16A2-75 @ 48 MHz 100 */ 101/* CS3BCR = 0x10004400, minimum idle cycles, SDRAM, 16 bit */ 102CS3BCR_D: .long 0x10004400 103/* tRP=1ck, tRCD=1ck, CL=2, tRWL=2ck, tRC=4ck */ 104CS3WCR_D: .long 0x00000091 105/* no refresh, 13 rows, 10 cols, NO bank active mode */ 106SDCR_D1: .long 0x00000012 107SDCR_D2: .long 0x00000812 /* refresh */ 108RTCSR_D: .long 0xA55A0008 /* 1/4, once */ 109RTCNT_D: .long 0xA55A005D /* count 93 */ 110RTCOR_D: .long 0xa55a005d /* count 93 */ 111/* mode register CL2, burst read and SINGLE WRITE */ 112SDMR3_D: .long 0x440 113 114/* 115 * Registers 116 */ 117 118FRQCR_A: .long 0xA415FF80 119WTCNT_A: .long 0xA415FF84 120WTCSR_A: .long 0xA415FF86 121 122#define BSC_BASE 0xA4FD0000 123CS0BCR_A: .long BSC_BASE + 0x04 124CS3BCR_A: .long BSC_BASE + 0x0C 125CS0WCR_A: .long BSC_BASE + 0x24 126CS3WCR_A: .long BSC_BASE + 0x2C 127SDCR_A: .long BSC_BASE + 0x44 128RTCSR_A: .long BSC_BASE + 0x48 129RTCNT_A: .long BSC_BASE + 0x4C 130RTCOR_A: .long BSC_BASE + 0x50 131SDMR3_A: .long BSC_BASE + 0x5000 132