1 /* 2 * (C) Copyright 2008 Stefan Roese <sr@denx.de>, DENX Software Engineering 3 * 4 * Copyright (C) 2006 Micronas GmbH 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #include <common.h> 10 #include <command.h> 11 #include <netdev.h> 12 #include <asm/mipsregs.h> 13 #include "vct.h" 14 15 #if defined(CONFIG_VCT_PREMIUM) 16 #define BOARD_NAME "PremiumD" 17 #elif defined(CONFIG_VCT_PLATINUM) 18 #define BOARD_NAME "PlatinumD" 19 #elif defined(CONFIG_VCT_PLATINUMAVC) 20 #define BOARD_NAME "PlatinumAVC" 21 #else 22 #error "vct: No board variant defined!" 23 #endif 24 25 #if defined(CONFIG_VCT_ONENAND) 26 #define BOARD_NAME_ADD " OneNAND" 27 #else 28 #define BOARD_NAME_ADD " NOR" 29 #endif 30 31 int board_early_init_f(void) 32 { 33 /* 34 * First initialize the PIN mulitplexing 35 */ 36 vct_pin_mux_initialize(); 37 38 /* 39 * Init the EBI very early so that FLASH can be accessed 40 */ 41 ebi_initialize(); 42 43 return 0; 44 } 45 46 void _machine_restart(void) 47 { 48 reg_write(DCGU_EN_WDT_RESET(DCGU_BASE), DCGU_MAGIC_WDT); 49 reg_write(WDT_TORR(WDT_BASE), 0x00); 50 reg_write(WDT_CR(WDT_BASE), 0x1D); 51 52 /* 53 * Now wait for the watchdog to trigger the reset 54 */ 55 udelay(1000000); 56 } 57 58 /* 59 * SDRAM is already configured by the bootstrap code, only return the 60 * auto-detected size here 61 */ 62 phys_size_t initdram(int board_type) 63 { 64 return get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 65 CONFIG_SYS_MBYTES_SDRAM << 20); 66 } 67 68 int checkboard(void) 69 { 70 char buf[64]; 71 int i = getenv_f("serial#", buf, sizeof(buf)); 72 u32 config0 = read_c0_prid(); 73 74 if ((config0 & 0xff0000) == PRID_COMP_LEGACY 75 && (config0 & 0xff00) == PRID_IMP_LX4280) { 76 puts("Board: MDED \n"); 77 printf("CPU: LX4280 id: 0x%02x, rev: 0x%02x\n", 78 (config0 >> 8) & 0xFF, config0 & 0xFF); 79 } else if ((config0 & 0xff0000) == PRID_COMP_MIPS 80 && (config0 & 0xff00) == PRID_IMP_VGC) { 81 u32 jedec_id = *((u32 *) 0xBEBC71A0); 82 if ((((jedec_id) >> 12) & 0xFF) == 0x40) { 83 puts("Board: VGCA \n"); 84 } else if ((((jedec_id) >> 12) & 0xFF) == 0x48 85 || (((jedec_id) >> 12) & 0xFF) == 0x49) { 86 puts("Board: VGCB \n"); 87 } 88 printf("CPU: MIPS 4K id: 0x%02x, rev: 0x%02x\n", 89 (config0 >> 8) & 0xFF, config0 & 0xFF); 90 } else if (config0 == 0x19378) { 91 printf("CPU: MIPS 24K id: 0x%02x, rev: 0x%02x\n", 92 (config0 >> 8) & 0xFF, config0 & 0xFF); 93 } else { 94 printf("Unsupported cpu %d, proc_id=0x%x\n", config0 >> 24, 95 config0); 96 } 97 98 printf("Board: Micronas VCT " BOARD_NAME BOARD_NAME_ADD); 99 if (i > 0) { 100 puts(", serial# "); 101 puts(buf); 102 } 103 putc('\n'); 104 105 return 0; 106 } 107 108 int board_eth_init(bd_t *bis) 109 { 110 int rc = 0; 111 #ifdef CONFIG_SMC911X 112 rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); 113 #endif 114 return rc; 115 } 116