1 /*
2  * (C) Copyright 2011
3  * Logic Product Development <www.logicpd.com>
4  *
5  * Author :
6  *	Peter Barada <peter.barada@logicpd.com>
7  *
8  * Derived from Beagle Board and 3430 SDP code by
9  *	Richard Woodruff <r-woodruff2@ti.com>
10  *	Syed Mohammed Khasim <khasim@ti.com>
11  *
12  * See file CREDITS for list of people who contributed to this
13  * project.
14  *
15  * This program is free software; you can redistribute it and/or
16  * modify it under the terms of the GNU General Public License as
17  * published by the Free Software Foundation; either version 2 of
18  * the License, or (at your option) any later version.
19  *
20  * This program is distributed in the hope that it will be useful,
21  * but WITHOUT ANY WARRANTY; without even the implied warranty of
22  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
23  * GNU General Public License for more details.
24  *
25  * You should have received a copy of the GNU General Public License
26  * along with this program; if not, write to the Free Software
27  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
28  * MA 02111-1307 USA
29  */
30 #include <common.h>
31 #include <netdev.h>
32 #include <flash.h>
33 #include <nand.h>
34 #include <i2c.h>
35 #include <twl4030.h>
36 #include <asm/io.h>
37 #include <asm/arch/mmc_host_def.h>
38 #include <asm/arch/mux.h>
39 #include <asm/arch/mem.h>
40 #include <asm/arch/sys_proto.h>
41 #include <asm/gpio.h>
42 #include <asm/mach-types.h>
43 #include "omap3logic.h"
44 
45 DECLARE_GLOBAL_DATA_PTR;
46 
47 /*
48  * two dimensional array of strucures containining board name and Linux
49  * machine IDs; row it selected based on CPU column is slected based
50  * on hsusb0_data5 pin having a pulldown resistor
51  */
52 static struct board_id {
53 	char *name;
54 	int machine_id;
55 } boards[2][2] = {
56 	{
57 		{
58 			.name		= "OMAP35xx SOM LV",
59 			.machine_id	= MACH_TYPE_OMAP3530_LV_SOM,
60 		},
61 		{
62 			.name		= "OMAP35xx Torpedo",
63 			.machine_id	= MACH_TYPE_OMAP3_TORPEDO,
64 		},
65 	},
66 	{
67 		{
68 			.name		= "DM37xx SOM LV",
69 			.machine_id	= MACH_TYPE_DM3730_SOM_LV,
70 		},
71 		{
72 			.name		= "DM37xx Torpedo",
73 			.machine_id	= MACH_TYPE_DM3730_TORPEDO,
74 		},
75 	},
76 };
77 
78 /*
79  * BOARD_ID_GPIO - GPIO of pin with optional pulldown resistor on SOM LV
80  */
81 #define BOARD_ID_GPIO	189 /* hsusb0_data5 pin */
82 
83 /*
84  * Routine: board_init
85  * Description: Early hardware init.
86  */
87 int board_init(void)
88 {
89 	struct board_id *board;
90 	unsigned int val;
91 
92 	gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
93 
94 	/* boot param addr */
95 	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
96 
97 	/*
98 	 * To identify between a SOM LV and Torpedo module,
99 	 * a pulldown resistor is on hsusb0_data5 for the SOM LV module.
100 	 * Drive the pin (and let it soak), then read it back.
101 	 * If the pin is still high its a Torpedo.  If low its a SOM LV
102 	 */
103 
104 	/* Mux hsusb0_data5 as a GPIO */
105 	MUX_VAL(CP(HSUSB0_DATA5),	(IEN  | PTD | DIS | M4));
106 
107 	if (gpio_request(BOARD_ID_GPIO, "husb0_data5.gpio_189") == 0) {
108 
109 		/*
110 		 * Drive BOARD_ID_GPIO - the pulldown resistor on the SOM LV
111 		 * will drain the voltage.
112 		 */
113 		gpio_direction_output(BOARD_ID_GPIO, 0);
114 		gpio_set_value(BOARD_ID_GPIO, 1);
115 
116 		/* Let it soak for a bit */
117 		sdelay(0x100);
118 
119 		/*
120 		 * Read state of BOARD_ID_GPIO as an input and if its set.
121 		 * If so the board is a Torpedo
122 		 */
123 		gpio_direction_input(BOARD_ID_GPIO);
124 		val = gpio_get_value(BOARD_ID_GPIO);
125 		gpio_free(BOARD_ID_GPIO);
126 
127 		board = &boards[!!(get_cpu_family() == CPU_OMAP36XX)][!!val];
128 		printf("Board: %s\n", board->name);
129 
130 		/* Set the machine_id passed to Linux */
131 		gd->bd->bi_arch_number = board->machine_id;
132 	}
133 
134 	/* restore hsusb0_data5 pin as hsusb0_data5 */
135 	MUX_VAL(CP(HSUSB0_DATA5),	(IEN  | PTD | DIS | M0));
136 
137 	return 0;
138 }
139 
140 #if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
141 int board_mmc_init(bd_t *bis)
142 {
143 	return omap_mmc_init(0, 0, 0, -1, -1);
144 }
145 #endif
146 
147 #ifdef CONFIG_SMC911X
148 /* GPMC CS1 settings for Logic SOM LV/Torpedo LAN92xx Ethernet chip */
149 static const u32 gpmc_lan92xx_config[] = {
150 	NET_LAN92XX_GPMC_CONFIG1,
151 	NET_LAN92XX_GPMC_CONFIG2,
152 	NET_LAN92XX_GPMC_CONFIG3,
153 	NET_LAN92XX_GPMC_CONFIG4,
154 	NET_LAN92XX_GPMC_CONFIG5,
155 	NET_LAN92XX_GPMC_CONFIG6,
156 };
157 
158 int board_eth_init(bd_t *bis)
159 {
160 	enable_gpmc_cs_config(gpmc_lan92xx_config, &gpmc_cfg->cs[1],
161 			CONFIG_SMC911X_BASE, GPMC_SIZE_16M);
162 
163 	return smc911x_initialize(0, CONFIG_SMC911X_BASE);
164 }
165 #endif
166 
167 /*
168  * IEN  - Input Enable
169  * IDIS - Input Disable
170  * PTD  - Pull type Down
171  * PTU  - Pull type Up
172  * DIS  - Pull type selection is inactive
173  * EN   - Pull type selection is active
174  * M0   - Mode 0
175  * The commented string gives the final mux configuration for that pin
176  */
177 
178 /*
179  * Routine: set_muxconf_regs
180  * Description: Setting up the configuration Mux registers specific to the
181  *		hardware. Many pins need to be moved from protect to primary
182  *		mode.
183  */
184 void set_muxconf_regs(void)
185 {
186 	/*GPMC*/
187 	MUX_VAL(CP(GPMC_A1),		(IDIS | PTU | EN  | M0));
188 	MUX_VAL(CP(GPMC_A2),		(IDIS | PTU | EN  | M0));
189 	MUX_VAL(CP(GPMC_A3),		(IDIS | PTU | EN  | M0));
190 	MUX_VAL(CP(GPMC_A4),		(IDIS | PTU | EN  | M0));
191 	MUX_VAL(CP(GPMC_A5),		(IDIS | PTU | EN  | M0));
192 	MUX_VAL(CP(GPMC_A6),		(IDIS | PTU | EN  | M0));
193 	MUX_VAL(CP(GPMC_A7),		(IDIS | PTU | EN  | M0));
194 	MUX_VAL(CP(GPMC_A8),		(IDIS | PTU | EN  | M0));
195 	MUX_VAL(CP(GPMC_A9),		(IDIS | PTU | EN  | M0));
196 	MUX_VAL(CP(GPMC_A10),		(IDIS | PTU | EN  | M0));
197 	MUX_VAL(CP(GPMC_D0),		(IEN  | PTU | EN  | M0));
198 	MUX_VAL(CP(GPMC_D1),		(IEN  | PTU | EN  | M0));
199 	MUX_VAL(CP(GPMC_D2),		(IEN  | PTU | EN  | M0));
200 	MUX_VAL(CP(GPMC_D3),		(IEN  | PTU | EN  | M0));
201 	MUX_VAL(CP(GPMC_D4),		(IEN  | PTU | EN  | M0));
202 	MUX_VAL(CP(GPMC_D5),		(IEN  | PTU | EN  | M0));
203 	MUX_VAL(CP(GPMC_D6),		(IEN  | PTU | EN  | M0));
204 	MUX_VAL(CP(GPMC_D7),		(IEN  | PTU | EN  | M0));
205 	MUX_VAL(CP(GPMC_D8),		(IEN  | PTU | EN  | M0));
206 	MUX_VAL(CP(GPMC_D9),		(IEN  | PTU | EN  | M0));
207 	MUX_VAL(CP(GPMC_D10),		(IEN  | PTU | EN  | M0));
208 	MUX_VAL(CP(GPMC_D11),		(IEN  | PTU | EN  | M0));
209 	MUX_VAL(CP(GPMC_D12),		(IEN  | PTU | EN  | M0));
210 	MUX_VAL(CP(GPMC_D13),		(IEN  | PTU | EN  | M0));
211 	MUX_VAL(CP(GPMC_D14),		(IEN  | PTU | EN  | M0));
212 	MUX_VAL(CP(GPMC_D15),		(IEN  | PTU | EN  | M0));
213 	MUX_VAL(CP(GPMC_NCS0),		(IDIS | PTU | EN  | M0));
214 	MUX_VAL(CP(GPMC_NCS1),		(IDIS | PTU | EN  | M0));
215 	MUX_VAL(CP(GPMC_NCS2),		(IDIS | PTU | EN  | M0));
216 	MUX_VAL(CP(GPMC_NCS3),		(IDIS | PTD | DIS | M0));
217 	MUX_VAL(CP(GPMC_NCS5),          (IDIS | PTU | DIS | M4));
218 	MUX_VAL(CP(GPMC_NCS7),		(IDIS | PTD | DIS | M1)); /*GPMC_IO_DIR*/
219 	MUX_VAL(CP(GPMC_NBE0_CLE),	(IDIS | PTU | EN  | M0));
220 	MUX_VAL(CP(GPMC_WAIT1),		(IEN  | PTU | EN  | M0));
221 
222 	/*Expansion card  */
223 	MUX_VAL(CP(MMC1_CLK),		(IDIS | PTU | EN  | M0));
224 	MUX_VAL(CP(MMC1_CMD),		(IEN  | PTU | EN  | M0));
225 	MUX_VAL(CP(MMC1_DAT0),		(IEN  | PTU | EN  | M0));
226 	MUX_VAL(CP(MMC1_DAT1),		(IEN  | PTU | EN  | M0));
227 	MUX_VAL(CP(MMC1_DAT2),		(IEN  | PTU | EN  | M0));
228 	MUX_VAL(CP(MMC1_DAT3),		(IEN  | PTU | EN  | M0));
229 
230 	/* Serial Console */
231 	MUX_VAL(CP(UART1_TX),		(IDIS | PTD | DIS | M0));
232 	MUX_VAL(CP(UART1_RTS),		(IDIS | PTD | DIS | M0));
233 	MUX_VAL(CP(UART1_CTS),		(IEN  | PTU | DIS | M0));
234 	MUX_VAL(CP(UART1_RX),		(IEN  | PTD | DIS | M0));
235 
236 	/* I2C */
237 	MUX_VAL(CP(I2C2_SCL),		(IEN  | PTU | EN  | M0));
238 	MUX_VAL(CP(I2C2_SDA),		(IEN  | PTU | EN  | M0));
239 	MUX_VAL(CP(I2C3_SCL),		(IEN  | PTU | EN  | M0));
240 	MUX_VAL(CP(I2C3_SDA),		(IEN  | PTU | EN  | M0));
241 
242 	MUX_VAL(CP(HDQ_SIO),		(IEN  | PTU | EN  | M0));
243 
244 	/*Control and debug */
245 	MUX_VAL(CP(SYS_NIRQ),		(IEN  | PTU | EN  | M0));
246 	MUX_VAL(CP(SYS_OFF_MODE),	(IEN  | PTD | DIS | M0));
247 	MUX_VAL(CP(SYS_CLKOUT1),	(IEN  | PTD | DIS | M0));
248 	MUX_VAL(CP(SYS_CLKOUT2),	(IEN  | PTU | EN  | M0));
249 	MUX_VAL(CP(JTAG_nTRST),		(IEN  | PTD | DIS | M0));
250 	MUX_VAL(CP(SDRC_CKE0),		(IDIS | PTU | EN  | M0));
251 }
252