1 /* 2 * (C) Copyright 2011 3 * Logic Product Development <www.logicpd.com> 4 * 5 * Author : 6 * Peter Barada <peter.barada@logicpd.com> 7 * 8 * Derived from Beagle Board and 3430 SDP code by 9 * Richard Woodruff <r-woodruff2@ti.com> 10 * Syed Mohammed Khasim <khasim@ti.com> 11 * 12 * See file CREDITS for list of people who contributed to this 13 * project. 14 * 15 * This program is free software; you can redistribute it and/or 16 * modify it under the terms of the GNU General Public License as 17 * published by the Free Software Foundation; either version 2 of 18 * the License, or (at your option) any later version. 19 * 20 * This program is distributed in the hope that it will be useful, 21 * but WITHOUT ANY WARRANTY; without even the implied warranty of 22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 23 * GNU General Public License for more details. 24 * 25 * You should have received a copy of the GNU General Public License 26 * along with this program; if not, write to the Free Software 27 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 28 * MA 02111-1307 USA 29 */ 30 #include <common.h> 31 #include <netdev.h> 32 #include <flash.h> 33 #include <nand.h> 34 #include <i2c.h> 35 #include <twl4030.h> 36 #include <asm/io.h> 37 #include <asm/arch/mmc_host_def.h> 38 #include <asm/arch/mux.h> 39 #include <asm/arch/mem.h> 40 #include <asm/arch/sys_proto.h> 41 #include <asm/gpio.h> 42 #include <asm/mach-types.h> 43 #include "omap3logic.h" 44 45 DECLARE_GLOBAL_DATA_PTR; 46 47 /* 48 * two dimensional array of strucures containining board name and Linux 49 * machine IDs; row it selected based on CPU column is slected based 50 * on hsusb0_data5 pin having a pulldown resistor 51 */ 52 static struct board_id { 53 char *name; 54 int machine_id; 55 } boards[2][2] = { 56 { 57 { 58 .name = "OMAP35xx SOM LV", 59 .machine_id = MACH_TYPE_OMAP3530_LV_SOM, 60 }, 61 { 62 .name = "OMAP35xx Torpedo", 63 .machine_id = MACH_TYPE_OMAP3_TORPEDO, 64 }, 65 }, 66 { 67 { 68 .name = "DM37xx SOM LV", 69 .machine_id = MACH_TYPE_DM3730_SOM_LV, 70 }, 71 { 72 .name = "DM37xx Torpedo", 73 .machine_id = MACH_TYPE_DM3730_TORPEDO, 74 }, 75 }, 76 }; 77 78 /* 79 * BOARD_ID_GPIO - GPIO of pin with optional pulldown resistor on SOM LV 80 */ 81 #define BOARD_ID_GPIO 189 /* hsusb0_data5 pin */ 82 83 /* 84 * Routine: board_init 85 * Description: Early hardware init. 86 */ 87 int board_init(void) 88 { 89 struct board_id *board; 90 unsigned int val; 91 92 gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ 93 94 /* boot param addr */ 95 gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); 96 97 /* 98 * To identify between a SOM LV and Torpedo module, 99 * a pulldown resistor is on hsusb0_data5 for the SOM LV module. 100 * Drive the pin (and let it soak), then read it back. 101 * If the pin is still high its a Torpedo. If low its a SOM LV 102 */ 103 104 /* Mux hsusb0_data5 as a GPIO */ 105 MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M4)); 106 107 if (gpio_request(BOARD_ID_GPIO, "husb0_data5.gpio_189") == 0) { 108 109 /* 110 * Drive BOARD_ID_GPIO - the pulldown resistor on the SOM LV 111 * will drain the voltage. 112 */ 113 gpio_direction_output(BOARD_ID_GPIO, 0); 114 gpio_set_value(BOARD_ID_GPIO, 1); 115 116 /* Let it soak for a bit */ 117 sdelay(0x100); 118 119 /* 120 * Read state of BOARD_ID_GPIO as an input and if its set. 121 * If so the board is a Torpedo 122 */ 123 gpio_direction_input(BOARD_ID_GPIO); 124 val = gpio_get_value(BOARD_ID_GPIO); 125 gpio_free(BOARD_ID_GPIO); 126 127 board = &boards[!!(get_cpu_family() == CPU_OMAP36XX)][!!val]; 128 printf("Board: %s\n", board->name); 129 130 /* Set the machine_id passed to Linux */ 131 gd->bd->bi_arch_number = board->machine_id; 132 } 133 134 /* restore hsusb0_data5 pin as hsusb0_data5 */ 135 MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)); 136 137 return 0; 138 } 139 140 #if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) 141 int board_mmc_init(bd_t *bis) 142 { 143 return omap_mmc_init(0, 0, 0, -1, -1); 144 } 145 #endif 146 147 #ifdef CONFIG_SMC911X 148 /* GPMC CS1 settings for Logic SOM LV/Torpedo LAN92xx Ethernet chip */ 149 static const u32 gpmc_lan92xx_config[] = { 150 NET_LAN92XX_GPMC_CONFIG1, 151 NET_LAN92XX_GPMC_CONFIG2, 152 NET_LAN92XX_GPMC_CONFIG3, 153 NET_LAN92XX_GPMC_CONFIG4, 154 NET_LAN92XX_GPMC_CONFIG5, 155 NET_LAN92XX_GPMC_CONFIG6, 156 }; 157 158 int board_eth_init(bd_t *bis) 159 { 160 enable_gpmc_cs_config(gpmc_lan92xx_config, &gpmc_cfg->cs[1], 161 CONFIG_SMC911X_BASE, GPMC_SIZE_16M); 162 163 return smc911x_initialize(0, CONFIG_SMC911X_BASE); 164 } 165 #endif 166 167 /* 168 * IEN - Input Enable 169 * IDIS - Input Disable 170 * PTD - Pull type Down 171 * PTU - Pull type Up 172 * DIS - Pull type selection is inactive 173 * EN - Pull type selection is active 174 * M0 - Mode 0 175 * The commented string gives the final mux configuration for that pin 176 */ 177 178 /* 179 * Routine: set_muxconf_regs 180 * Description: Setting up the configuration Mux registers specific to the 181 * hardware. Many pins need to be moved from protect to primary 182 * mode. 183 */ 184 void set_muxconf_regs(void) 185 { 186 /*GPMC*/ 187 MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)); 188 MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)); 189 MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)); 190 MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)); 191 MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)); 192 MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)); 193 MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)); 194 MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0)); 195 MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0)); 196 MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0)); 197 MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)); 198 MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)); 199 MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)); 200 MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)); 201 MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)); 202 MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)); 203 MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)); 204 MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)); 205 MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)); 206 MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)); 207 MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)); 208 MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)); 209 MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)); 210 MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)); 211 MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)); 212 MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)); 213 MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)); 214 MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)); 215 MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)); 216 MUX_VAL(CP(GPMC_NCS3), (IDIS | PTD | DIS | M0)); 217 MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | DIS | M4)); 218 MUX_VAL(CP(GPMC_NCS7), (IDIS | PTD | DIS | M1)); /*GPMC_IO_DIR*/ 219 MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0)); 220 MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)); 221 222 /*Expansion card */ 223 MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)); 224 MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)); 225 MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)); 226 MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)); 227 MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)); 228 MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)); 229 230 /* Serial Console */ 231 MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)); 232 MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0)); 233 MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M0)); 234 MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)); 235 236 /* I2C */ 237 MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)); 238 MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)); 239 MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)); 240 MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)); 241 242 MUX_VAL(CP(HDQ_SIO), (IEN | PTU | EN | M0)); 243 244 /*Control and debug */ 245 MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)); 246 MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)); 247 MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)); 248 MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M0)); 249 MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)); 250 MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)); 251 } 252