xref: /openbmc/u-boot/board/laird/wb50n/wb50n.c (revision 63e22517)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  */
4 
5 #include <common.h>
6 #include <asm/io.h>
7 #include <asm/arch/sama5_sfr.h>
8 #include <asm/arch/sama5d3_smc.h>
9 #include <asm/arch/at91_common.h>
10 #include <asm/arch/at91_pmc.h>
11 #include <asm/arch/at91_rstc.h>
12 #include <asm/arch/gpio.h>
13 #include <asm/arch/clk.h>
14 #include <micrel.h>
15 #include <net.h>
16 #include <netdev.h>
17 #include <spl.h>
18 #include <asm/arch/atmel_mpddrc.h>
19 #include <asm/arch/at91_wdt.h>
20 
21 DECLARE_GLOBAL_DATA_PTR;
22 
23 /* ------------------------------------------------------------------------- */
24 /*
25  * Miscelaneous platform dependent initialisations
26  */
27 
28 void wb50n_nand_hw_init(void)
29 {
30 	struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
31 
32 	at91_periph_clk_enable(ATMEL_ID_SMC);
33 
34 	/* Configure SMC CS3 for NAND/SmartMedia */
35 	writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(1) |
36 	       AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(1),
37 	       &smc->cs[3].setup);
38 	writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(5) |
39 	       AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(5),
40 	       &smc->cs[3].pulse);
41 	writel(AT91_SMC_CYCLE_NWE(8) | AT91_SMC_CYCLE_NRD(8),
42 	       &smc->cs[3].cycle);
43 	writel(AT91_SMC_TIMINGS_TCLR(3) | AT91_SMC_TIMINGS_TADL(10) |
44 	       AT91_SMC_TIMINGS_TAR(3) | AT91_SMC_TIMINGS_TRR(4) |
45 	       AT91_SMC_TIMINGS_TWB(5) | AT91_SMC_TIMINGS_RBNSEL(3) |
46 	       AT91_SMC_TIMINGS_NFSEL(1), &smc->cs[3].timings);
47 	writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
48 	       AT91_SMC_MODE_EXNW_DISABLE |
49 	       AT91_SMC_MODE_DBW_8 |
50 	       AT91_SMC_MODE_TDF_CYCLE(3), &smc->cs[3].mode);
51 
52 	/* Disable Flash Write Protect Line */
53 	at91_set_pio_output(AT91_PIO_PORTE, 14, 1);
54 }
55 
56 int board_early_init_f(void)
57 {
58 	at91_periph_clk_enable(ATMEL_ID_PIOA);
59 	at91_periph_clk_enable(ATMEL_ID_PIOB);
60 	at91_periph_clk_enable(ATMEL_ID_PIOC);
61 	at91_periph_clk_enable(ATMEL_ID_PIOD);
62 	at91_periph_clk_enable(ATMEL_ID_PIOE);
63 
64 	at91_seriald_hw_init();
65 
66 	return 0;
67 }
68 
69 int board_init(void)
70 {
71 	/* adress of boot parameters */
72 	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
73 
74 	wb50n_nand_hw_init();
75 
76 	at91_macb_hw_init();
77 
78 	return 0;
79 }
80 
81 int dram_init(void)
82 {
83 	gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
84 	                            CONFIG_SYS_SDRAM_SIZE);
85 	return 0;
86 }
87 
88 int board_phy_config(struct phy_device *phydev)
89 {
90 	/* rx data delay */
91 	ksz9021_phy_extended_write(phydev,
92 	                           MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW, 0x2222);
93 	/* tx data delay */
94 	ksz9021_phy_extended_write(phydev,
95 	                           MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW, 0x2222);
96 	/* rx/tx clock delay */
97 	ksz9021_phy_extended_write(phydev,
98 	                           MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, 0xf2f4);
99 
100 	return 0;
101 }
102 
103 int board_eth_init(bd_t *bis)
104 {
105 	int rc = 0;
106 
107 	rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x00);
108 
109 	return rc;
110 }
111 
112 #ifdef CONFIG_BOARD_LATE_INIT
113 #include <linux/ctype.h>
114 int board_late_init(void)
115 {
116 #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
117 	const char *LAIRD_NAME = "lrd_name";
118 	char name[32], *p;
119 
120 	strcpy(name, get_cpu_name());
121 	for (p = name; *p != '\0'; *p = tolower(*p), p++)
122 		;
123 	strcat(name, "-wb50n");
124 	env_set(LAIRD_NAME, name);
125 
126 #endif
127 
128 	return 0;
129 }
130 #endif
131 
132 /* SPL */
133 #ifdef CONFIG_SPL_BUILD
134 void spl_board_init(void)
135 {
136 	wb50n_nand_hw_init();
137 }
138 
139 static void ddr2_conf(struct atmel_mpddrc_config *ddr2)
140 {
141 	ddr2->md = (ATMEL_MPDDRC_MD_DBW_32_BITS | ATMEL_MPDDRC_MD_LPDDR_SDRAM);
142 
143 	ddr2->cr = (ATMEL_MPDDRC_CR_NC_COL_9 |
144 	            ATMEL_MPDDRC_CR_NR_ROW_13 |
145 	            ATMEL_MPDDRC_CR_CAS_DDR_CAS3 |
146 	            ATMEL_MPDDRC_CR_NDQS_DISABLED |
147 	            ATMEL_MPDDRC_CR_DECOD_INTERLEAVED |
148 	            ATMEL_MPDDRC_CR_UNAL_SUPPORTED);
149 
150 	ddr2->rtr = 0x411;
151 
152 	ddr2->tpr0 = (6 << ATMEL_MPDDRC_TPR0_TRAS_OFFSET |
153 	              2 << ATMEL_MPDDRC_TPR0_TRCD_OFFSET |
154 	              2 << ATMEL_MPDDRC_TPR0_TWR_OFFSET |
155 	              8 << ATMEL_MPDDRC_TPR0_TRC_OFFSET |
156 	              2 << ATMEL_MPDDRC_TPR0_TRP_OFFSET |
157 	              2 << ATMEL_MPDDRC_TPR0_TRRD_OFFSET |
158 	              2 << ATMEL_MPDDRC_TPR0_TWTR_OFFSET |
159 	              2 << ATMEL_MPDDRC_TPR0_TMRD_OFFSET);
160 
161 	ddr2->tpr1 = (2 << ATMEL_MPDDRC_TPR1_TXP_OFFSET |
162 	              200 << ATMEL_MPDDRC_TPR1_TXSRD_OFFSET |
163 	              19 << ATMEL_MPDDRC_TPR1_TXSNR_OFFSET |
164 	              18 << ATMEL_MPDDRC_TPR1_TRFC_OFFSET);
165 
166 	ddr2->tpr2 = (7 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET |
167 	              2 << ATMEL_MPDDRC_TPR2_TRTP_OFFSET |
168 	              3 << ATMEL_MPDDRC_TPR2_TRPA_OFFSET |
169 	              7 << ATMEL_MPDDRC_TPR2_TXARDS_OFFSET |
170 	              2 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET);
171 }
172 
173 void mem_init(void)
174 {
175 	struct atmel_sfr *sfr = (struct atmel_sfr *)ATMEL_BASE_SFR;
176 	struct atmel_mpddrc_config ddr2;
177 
178 	ddr2_conf(&ddr2);
179 
180 	writel(ATMEL_SFR_DDRCFG_FDQIEN | ATMEL_SFR_DDRCFG_FDQSIEN,
181 	       &sfr->ddrcfg);
182 
183 	/* enable MPDDR clock */
184 	at91_periph_clk_enable(ATMEL_ID_MPDDRC);
185 	at91_system_clk_enable(AT91_PMC_DDR);
186 
187 	/* DDRAM2 Controller initialize */
188 	ddr2_init(ATMEL_BASE_MPDDRC, ATMEL_BASE_DDRCS, &ddr2);
189 }
190 
191 void at91_pmc_init(void)
192 {
193 	u32 tmp;
194 
195 	tmp = AT91_PMC_PLLAR_29 |
196 	      AT91_PMC_PLLXR_PLLCOUNT(0x3f) |
197 	      AT91_PMC_PLLXR_MUL(43) | AT91_PMC_PLLXR_DIV(1);
198 	at91_plla_init(tmp);
199 
200 	at91_pllicpr_init(AT91_PMC_IPLL_PLLA(0x3));
201 
202 	tmp = AT91_PMC_MCKR_MDIV_4 | AT91_PMC_MCKR_CSS_PLLA;
203 	at91_mck_init(tmp);
204 }
205 #endif
206