1 /* 2 * Novena SPL 3 * 4 * Copyright (C) 2014 Marek Vasut <marex@denx.de> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #include <common.h> 10 #include <asm/io.h> 11 #include <asm/arch/clock.h> 12 #include <asm/arch/iomux.h> 13 #include <asm/arch/mx6-ddr.h> 14 #include <asm/arch/mx6-pins.h> 15 #include <asm/arch/sys_proto.h> 16 #include <asm/gpio.h> 17 #include <asm/imx-common/boot_mode.h> 18 #include <asm/imx-common/iomux-v3.h> 19 #include <asm/imx-common/mxc_i2c.h> 20 #include <asm/arch/crm_regs.h> 21 #include <i2c.h> 22 #include <mmc.h> 23 #include <fsl_esdhc.h> 24 #include <spl.h> 25 26 #include <asm/arch/mx6-ddr.h> 27 28 #include "novena.h" 29 30 DECLARE_GLOBAL_DATA_PTR; 31 32 #define UART_PAD_CTRL \ 33 (PAD_CTL_PKE | PAD_CTL_PUE | \ 34 PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ 35 PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) 36 37 #define USDHC_PAD_CTRL \ 38 (PAD_CTL_PKE | PAD_CTL_PUE | \ 39 PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \ 40 PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) 41 42 #define ENET_PAD_CTRL \ 43 (PAD_CTL_PKE | PAD_CTL_PUE | \ 44 PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ 45 PAD_CTL_DSE_40ohm | PAD_CTL_HYS) 46 47 #define ENET_PHY_CFG_PAD_CTRL \ 48 (PAD_CTL_PKE | PAD_CTL_PUE | \ 49 PAD_CTL_PUS_22K_UP | PAD_CTL_HYS) 50 51 #define RGMII_PAD_CTRL \ 52 (PAD_CTL_PKE | PAD_CTL_PUE | \ 53 PAD_CTL_PUS_100K_UP | PAD_CTL_DSE_40ohm | PAD_CTL_HYS) 54 55 #define SPI_PAD_CTRL \ 56 (PAD_CTL_HYS | \ 57 PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_MED | \ 58 PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST) 59 60 #define I2C_PAD_CTRL \ 61 (PAD_CTL_PKE | PAD_CTL_PUE | \ 62 PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_LOW | \ 63 PAD_CTL_DSE_240ohm | PAD_CTL_HYS | \ 64 PAD_CTL_ODE) 65 66 #define BUTTON_PAD_CTRL \ 67 (PAD_CTL_PKE | PAD_CTL_PUE | \ 68 PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ 69 PAD_CTL_DSE_40ohm | PAD_CTL_HYS) 70 71 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) 72 73 /* 74 * Audio 75 */ 76 static iomux_v3_cfg_t audio_pads[] = { 77 /* AUD_PWRON */ 78 MX6_PAD_DISP0_DAT23__GPIO5_IO17 | MUX_PAD_CTRL(NO_PAD_CTRL), 79 }; 80 81 static void novena_spl_setup_iomux_audio(void) 82 { 83 imx_iomux_v3_setup_multiple_pads(audio_pads, ARRAY_SIZE(audio_pads)); 84 gpio_direction_output(NOVENA_AUDIO_PWRON, 1); 85 } 86 87 /* 88 * ENET 89 */ 90 static iomux_v3_cfg_t enet_pads1[] = { 91 MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), 92 MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), 93 MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(RGMII_PAD_CTRL), 94 MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(RGMII_PAD_CTRL), 95 MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(RGMII_PAD_CTRL), 96 MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(RGMII_PAD_CTRL), 97 MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(RGMII_PAD_CTRL), 98 MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(RGMII_PAD_CTRL), 99 MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), 100 101 /* pin 35, PHY_AD2 */ 102 MX6_PAD_RGMII_RXC__GPIO6_IO30 | MUX_PAD_CTRL(ENET_PHY_CFG_PAD_CTRL), 103 /* pin 32, MODE0 */ 104 MX6_PAD_RGMII_RD0__GPIO6_IO25 | MUX_PAD_CTRL(ENET_PHY_CFG_PAD_CTRL), 105 /* pin 31, MODE1 */ 106 MX6_PAD_RGMII_RD1__GPIO6_IO27 | MUX_PAD_CTRL(ENET_PHY_CFG_PAD_CTRL), 107 /* pin 28, MODE2 */ 108 MX6_PAD_RGMII_RD2__GPIO6_IO28 | MUX_PAD_CTRL(ENET_PHY_CFG_PAD_CTRL), 109 /* pin 27, MODE3 */ 110 MX6_PAD_RGMII_RD3__GPIO6_IO29 | MUX_PAD_CTRL(ENET_PHY_CFG_PAD_CTRL), 111 /* pin 33, CLK125_EN */ 112 MX6_PAD_RGMII_RX_CTL__GPIO6_IO24 | MUX_PAD_CTRL(ENET_PHY_CFG_PAD_CTRL), 113 114 /* pin 42 PHY nRST */ 115 MX6_PAD_EIM_D23__GPIO3_IO23 | MUX_PAD_CTRL(NO_PAD_CTRL), 116 }; 117 118 static iomux_v3_cfg_t enet_pads2[] = { 119 MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(RGMII_PAD_CTRL), 120 MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(RGMII_PAD_CTRL), 121 MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(RGMII_PAD_CTRL), 122 MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(RGMII_PAD_CTRL), 123 MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(RGMII_PAD_CTRL), 124 MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(RGMII_PAD_CTRL), 125 }; 126 127 static void novena_spl_setup_iomux_enet(void) 128 { 129 imx_iomux_v3_setup_multiple_pads(enet_pads1, ARRAY_SIZE(enet_pads1)); 130 131 /* Assert Ethernet PHY nRST */ 132 gpio_direction_output(IMX_GPIO_NR(3, 23), 0); 133 134 /* 135 * Use imx6 internal pull-ups to drive PHY mode pins during PHY reset 136 * de-assertion. The intention is to use weak signal drivers (pull-ups) 137 * to prevent the conflict between PHY pins becoming outputs after 138 * reset and imx6 still driving the pins. The issue is described in PHY 139 * datasheet, p.14 140 */ 141 gpio_direction_input(IMX_GPIO_NR(6, 30)); /* PHY_AD2 = 1 */ 142 gpio_direction_input(IMX_GPIO_NR(6, 25)); /* MODE0 = 1 */ 143 gpio_direction_input(IMX_GPIO_NR(6, 27)); /* MODE1 = 1 */ 144 gpio_direction_input(IMX_GPIO_NR(6, 28)); /* MODE2 = 1 */ 145 gpio_direction_input(IMX_GPIO_NR(6, 29)); /* MODE3 = 1 */ 146 gpio_direction_input(IMX_GPIO_NR(6, 24)); /* CLK125_EN = 1 */ 147 148 /* Following reset timing (p.53, fig.8 from the PHY datasheet) */ 149 mdelay(10); 150 151 /* De-assert Ethernet PHY nRST */ 152 gpio_set_value(IMX_GPIO_NR(3, 23), 1); 153 154 /* PHY is now configured, connect FEC to the pads */ 155 imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2)); 156 157 /* 158 * PHY datasheet recommends on p.53 to wait at least 100us after reset 159 * before using MII, so we enforce the delay here 160 */ 161 udelay(100); 162 } 163 164 /* 165 * FPGA 166 */ 167 static iomux_v3_cfg_t fpga_pads[] = { 168 /* FPGA_RESET_N */ 169 MX6_PAD_DISP0_DAT13__GPIO5_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL), 170 }; 171 172 static void novena_spl_setup_iomux_fpga(void) 173 { 174 imx_iomux_v3_setup_multiple_pads(fpga_pads, ARRAY_SIZE(fpga_pads)); 175 gpio_direction_output(NOVENA_FPGA_RESET_N_GPIO, 0); 176 } 177 178 /* 179 * GPIO Button 180 */ 181 static iomux_v3_cfg_t button_pads[] = { 182 /* Debug */ 183 MX6_PAD_KEY_COL4__GPIO4_IO14 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), 184 }; 185 186 static void novena_spl_setup_iomux_buttons(void) 187 { 188 imx_iomux_v3_setup_multiple_pads(button_pads, ARRAY_SIZE(button_pads)); 189 } 190 191 /* 192 * I2C 193 */ 194 /* 195 * I2C1: 196 * 0x1d ... MMA7455L 197 * 0x30 ... SO-DIMM temp sensor 198 * 0x44 ... STMPE610 199 * 0x50 ... SO-DIMM ID 200 */ 201 struct i2c_pads_info i2c_pad_info0 = { 202 .scl = { 203 .i2c_mode = MX6_PAD_EIM_D21__I2C1_SCL | PC, 204 .gpio_mode = MX6_PAD_EIM_D21__GPIO3_IO21 | PC, 205 .gp = IMX_GPIO_NR(3, 21) 206 }, 207 .sda = { 208 .i2c_mode = MX6_PAD_EIM_D28__I2C1_SDA | PC, 209 .gpio_mode = MX6_PAD_EIM_D28__GPIO3_IO28 | PC, 210 .gp = IMX_GPIO_NR(3, 28) 211 } 212 }; 213 214 /* 215 * I2C2: 216 * 0x08 ... PMIC 217 * 0x3a ... HDMI DCC 218 * 0x50 ... HDMI DCC 219 */ 220 static struct i2c_pads_info i2c_pad_info1 = { 221 .scl = { 222 .i2c_mode = MX6_PAD_EIM_EB2__I2C2_SCL | PC, 223 .gpio_mode = MX6_PAD_EIM_EB2__GPIO2_IO30 | PC, 224 .gp = IMX_GPIO_NR(2, 30) 225 }, 226 .sda = { 227 .i2c_mode = MX6_PAD_EIM_D16__I2C2_SDA | PC, 228 .gpio_mode = MX6_PAD_EIM_D16__GPIO3_IO16 | PC, 229 .gp = IMX_GPIO_NR(3, 16) 230 } 231 }; 232 233 /* 234 * I2C3: 235 * 0x11 ... ES8283 236 * 0x50 ... LCD EDID 237 * 0x56 ... EEPROM 238 */ 239 static struct i2c_pads_info i2c_pad_info2 = { 240 .scl = { 241 .i2c_mode = MX6_PAD_EIM_D17__I2C3_SCL | PC, 242 .gpio_mode = MX6_PAD_EIM_D17__GPIO3_IO17 | PC, 243 .gp = IMX_GPIO_NR(3, 17) 244 }, 245 .sda = { 246 .i2c_mode = MX6_PAD_EIM_D18__I2C3_SDA | PC, 247 .gpio_mode = MX6_PAD_EIM_D18__GPIO3_IO18 | PC, 248 .gp = IMX_GPIO_NR(3, 18) 249 } 250 }; 251 252 static void novena_spl_setup_iomux_i2c(void) 253 { 254 setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info0); 255 setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); 256 setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2); 257 } 258 259 /* 260 * PCI express 261 */ 262 #ifdef CONFIG_CMD_PCI 263 static iomux_v3_cfg_t pcie_pads[] = { 264 /* "Reset" pin */ 265 MX6_PAD_EIM_D29__GPIO3_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL), 266 /* "Power on" pin */ 267 MX6_PAD_GPIO_17__GPIO7_IO12 | MUX_PAD_CTRL(NO_PAD_CTRL), 268 /* "Wake up" pin (input) */ 269 MX6_PAD_EIM_D22__GPIO3_IO22 | MUX_PAD_CTRL(NO_PAD_CTRL), 270 /* "Disable endpoint" (rfkill) pin */ 271 MX6_PAD_EIM_A22__GPIO2_IO16 | MUX_PAD_CTRL(NO_PAD_CTRL), 272 }; 273 274 static void novena_spl_setup_iomux_pcie(void) 275 { 276 imx_iomux_v3_setup_multiple_pads(pcie_pads, ARRAY_SIZE(pcie_pads)); 277 278 /* Ensure PCIe is powered down */ 279 gpio_direction_output(NOVENA_PCIE_POWER_ON_GPIO, 0); 280 281 /* Put the card into reset */ 282 gpio_direction_output(NOVENA_PCIE_RESET_GPIO, 0); 283 284 /* Input signal to wake system from mPCIe card */ 285 gpio_direction_input(NOVENA_PCIE_WAKE_UP_GPIO); 286 287 /* Drive RFKILL high, to ensure the radio is turned on */ 288 gpio_direction_output(NOVENA_PCIE_DISABLE_GPIO, 1); 289 } 290 #else 291 static inline void novena_spl_setup_iomux_pcie(void) {} 292 #endif 293 294 /* 295 * SDHC 296 */ 297 static iomux_v3_cfg_t usdhc2_pads[] = { 298 MX6_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), 299 MX6_PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), 300 MX6_PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 301 MX6_PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 302 MX6_PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 303 MX6_PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 304 MX6_PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL), /* WP */ 305 MX6_PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ 306 }; 307 308 static iomux_v3_cfg_t usdhc3_pads[] = { 309 MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), 310 MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), 311 MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 312 MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 313 MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 314 MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 315 }; 316 317 static void novena_spl_setup_iomux_sdhc(void) 318 { 319 imx_iomux_v3_setup_multiple_pads(usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); 320 imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); 321 322 /* Big SD write-protect and card-detect */ 323 gpio_direction_input(IMX_GPIO_NR(1, 2)); 324 gpio_direction_input(IMX_GPIO_NR(1, 4)); 325 } 326 327 /* 328 * SPI 329 */ 330 #ifdef CONFIG_MXC_SPI 331 static iomux_v3_cfg_t ecspi3_pads[] = { 332 /* SS1 */ 333 MX6_PAD_DISP0_DAT1__ECSPI3_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL), 334 MX6_PAD_DISP0_DAT2__ECSPI3_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL), 335 MX6_PAD_DISP0_DAT0__ECSPI3_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL), 336 MX6_PAD_DISP0_DAT3__GPIO4_IO24 | MUX_PAD_CTRL(SPI_PAD_CTRL), 337 MX6_PAD_DISP0_DAT4__GPIO4_IO25 | MUX_PAD_CTRL(SPI_PAD_CTRL), 338 MX6_PAD_DISP0_DAT5__GPIO4_IO26 | MUX_PAD_CTRL(SPI_PAD_CTRL), 339 MX6_PAD_DISP0_DAT7__ECSPI3_RDY | MUX_PAD_CTRL(SPI_PAD_CTRL), 340 }; 341 342 static void novena_spl_setup_iomux_spi(void) 343 { 344 imx_iomux_v3_setup_multiple_pads(ecspi3_pads, ARRAY_SIZE(ecspi3_pads)); 345 /* De-assert the nCS */ 346 gpio_direction_output(MX6_PAD_DISP0_DAT3__GPIO4_IO24, 1); 347 gpio_direction_output(MX6_PAD_DISP0_DAT4__GPIO4_IO25, 1); 348 gpio_direction_output(MX6_PAD_DISP0_DAT5__GPIO4_IO26, 1); 349 } 350 #else 351 static void novena_spl_setup_iomux_spi(void) {} 352 #endif 353 354 /* 355 * UART 356 */ 357 static iomux_v3_cfg_t const uart2_pads[] = { 358 MX6_PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), 359 MX6_PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), 360 }; 361 362 static iomux_v3_cfg_t const uart3_pads[] = { 363 MX6_PAD_EIM_D24__UART3_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), 364 MX6_PAD_EIM_D25__UART3_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), 365 }; 366 367 static iomux_v3_cfg_t const uart4_pads[] = { 368 MX6_PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), 369 MX6_PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), 370 MX6_PAD_CSI0_DAT16__UART4_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL), 371 MX6_PAD_CSI0_DAT17__UART4_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL), 372 373 }; 374 375 static void novena_spl_setup_iomux_uart(void) 376 { 377 imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads)); 378 imx_iomux_v3_setup_multiple_pads(uart3_pads, ARRAY_SIZE(uart3_pads)); 379 imx_iomux_v3_setup_multiple_pads(uart4_pads, ARRAY_SIZE(uart4_pads)); 380 } 381 382 /* 383 * Video 384 */ 385 #ifdef CONFIG_VIDEO 386 static iomux_v3_cfg_t hdmi_pads[] = { 387 /* "Ghost HPD" pin */ 388 MX6_PAD_EIM_A24__GPIO5_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL), 389 390 /* LCD_PWR_CTL */ 391 MX6_PAD_CSI0_DAT10__GPIO5_IO28 | MUX_PAD_CTRL(NO_PAD_CTRL), 392 /* LCD_BL_ON */ 393 MX6_PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL), 394 /* GPIO_PWM1 */ 395 MX6_PAD_DISP0_DAT8__GPIO4_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL), 396 }; 397 398 static void novena_spl_setup_iomux_video(void) 399 { 400 imx_iomux_v3_setup_multiple_pads(hdmi_pads, ARRAY_SIZE(hdmi_pads)); 401 gpio_direction_input(NOVENA_HDMI_GHOST_HPD); 402 } 403 #else 404 static inline void novena_spl_setup_iomux_video(void) {} 405 #endif 406 407 /* 408 * SPL boots from uSDHC card 409 */ 410 #ifdef CONFIG_FSL_ESDHC 411 static struct fsl_esdhc_cfg usdhc_cfg = { 412 USDHC3_BASE_ADDR, 0, 4 413 }; 414 415 int board_mmc_getcd(struct mmc *mmc) 416 { 417 /* There is no CD for a microSD card, assume always present. */ 418 return 1; 419 } 420 421 int board_mmc_init(bd_t *bis) 422 { 423 usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); 424 return fsl_esdhc_initialize(bis, &usdhc_cfg); 425 } 426 #endif 427 428 /* Configure MX6Q/DUAL mmdc DDR io registers */ 429 static struct mx6dq_iomux_ddr_regs novena_ddr_ioregs = { 430 /* SDCLK[0:1], CAS, RAS, Reset: Differential input, 40ohm */ 431 .dram_sdclk_0 = 0x00020038, 432 .dram_sdclk_1 = 0x00020038, 433 .dram_cas = 0x00000038, 434 .dram_ras = 0x00000038, 435 .dram_reset = 0x00000038, 436 /* SDCKE[0:1]: 100k pull-up */ 437 .dram_sdcke0 = 0x00003000, 438 .dram_sdcke1 = 0x00003000, 439 /* SDBA2: pull-up disabled */ 440 .dram_sdba2 = 0x00000000, 441 /* SDODT[0:1]: 100k pull-up, 40 ohm */ 442 .dram_sdodt0 = 0x00000038, 443 .dram_sdodt1 = 0x00000038, 444 /* SDQS[0:7]: Differential input, 40 ohm */ 445 .dram_sdqs0 = 0x00000038, 446 .dram_sdqs1 = 0x00000038, 447 .dram_sdqs2 = 0x00000038, 448 .dram_sdqs3 = 0x00000038, 449 .dram_sdqs4 = 0x00000038, 450 .dram_sdqs5 = 0x00000038, 451 .dram_sdqs6 = 0x00000038, 452 .dram_sdqs7 = 0x00000038, 453 454 /* DQM[0:7]: Differential input, 40 ohm */ 455 .dram_dqm0 = 0x00000038, 456 .dram_dqm1 = 0x00000038, 457 .dram_dqm2 = 0x00000038, 458 .dram_dqm3 = 0x00000038, 459 .dram_dqm4 = 0x00000038, 460 .dram_dqm5 = 0x00000038, 461 .dram_dqm6 = 0x00000038, 462 .dram_dqm7 = 0x00000038, 463 }; 464 465 /* Configure MX6Q/DUAL mmdc GRP io registers */ 466 static struct mx6dq_iomux_grp_regs novena_grp_ioregs = { 467 /* DDR3 */ 468 .grp_ddr_type = 0x000c0000, 469 .grp_ddrmode_ctl = 0x00020000, 470 /* Disable DDR pullups */ 471 .grp_ddrpke = 0x00000000, 472 /* ADDR[00:16], SDBA[0:1]: 40 ohm */ 473 .grp_addds = 0x00000038, 474 /* CS0/CS1/SDBA2/CKE0/CKE1/SDWE: 40 ohm */ 475 .grp_ctlds = 0x00000038, 476 /* DATA[00:63]: Differential input, 40 ohm */ 477 .grp_ddrmode = 0x00020000, 478 .grp_b0ds = 0x00000038, 479 .grp_b1ds = 0x00000038, 480 .grp_b2ds = 0x00000038, 481 .grp_b3ds = 0x00000038, 482 .grp_b4ds = 0x00000038, 483 .grp_b5ds = 0x00000038, 484 .grp_b6ds = 0x00000038, 485 .grp_b7ds = 0x00000038, 486 }; 487 488 static struct mx6_mmdc_calibration novena_mmdc_calib = { 489 /* write leveling calibration determine */ 490 .p0_mpwldectrl0 = 0x00420048, 491 .p0_mpwldectrl1 = 0x006f0059, 492 .p1_mpwldectrl0 = 0x005a0104, 493 .p1_mpwldectrl1 = 0x01070113, 494 /* Read DQS Gating calibration */ 495 .p0_mpdgctrl0 = 0x437c040b, 496 .p0_mpdgctrl1 = 0x0413040e, 497 .p1_mpdgctrl0 = 0x444f0446, 498 .p1_mpdgctrl1 = 0x044d0422, 499 /* Read Calibration: DQS delay relative to DQ read access */ 500 .p0_mprddlctl = 0x4c424249, 501 .p1_mprddlctl = 0x4e48414f, 502 /* Write Calibration: DQ/DM delay relative to DQS write access */ 503 .p0_mpwrdlctl = 0x42414641, 504 .p1_mpwrdlctl = 0x46374b43, 505 }; 506 507 static struct mx6_ddr_sysinfo novena_ddr_info = { 508 /* Width of data bus: 0=16, 1=32, 2=64 */ 509 .dsize = 2, 510 /* Config for full 4GB range so that get_mem_size() works */ 511 .cs_density = 32, /* 32Gb per CS */ 512 /* Single chip select */ 513 .ncs = 1, 514 .cs1_mirror = 0, 515 .rtt_wr = 1, /* RTT_Wr = RZQ/4 */ 516 .rtt_nom = 2, /* RTT_Nom = RZQ/2 */ 517 .walat = 3, /* Write additional latency */ 518 .ralat = 7, /* Read additional latency */ 519 .mif3_mode = 3, /* Command prediction working mode */ 520 .bi_on = 1, /* Bank interleaving enabled */ 521 .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */ 522 .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */ 523 }; 524 525 static struct mx6_ddr3_cfg elpida_4gib_1600 = { 526 .mem_speed = 1600, 527 .density = 4, 528 .width = 64, 529 .banks = 8, 530 .rowaddr = 16, 531 .coladdr = 10, 532 .pagesz = 2, 533 .trcd = 1300, 534 .trcmin = 4900, 535 .trasmin = 3590, 536 }; 537 538 static void ccgr_init(void) 539 { 540 struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; 541 542 writel(0x00C03F3F, &ccm->CCGR0); 543 writel(0x0030FC03, &ccm->CCGR1); 544 writel(0x0FFFC000, &ccm->CCGR2); 545 writel(0x3FF00000, &ccm->CCGR3); 546 writel(0xFFFFF300, &ccm->CCGR4); 547 writel(0x0F0000C3, &ccm->CCGR5); 548 writel(0x000003FF, &ccm->CCGR6); 549 } 550 551 static void gpr_init(void) 552 { 553 struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; 554 555 /* enable AXI cache for VDOA/VPU/IPU */ 556 writel(0xF00000CF, &iomux->gpr[4]); 557 /* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ 558 writel(0x007F007F, &iomux->gpr[6]); 559 writel(0x007F007F, &iomux->gpr[7]); 560 } 561 562 /* 563 * called from C runtime startup code (arch/arm/lib/crt0.S:_main) 564 * - we have a stack and a place to store GD, both in SRAM 565 * - no variable global data is available 566 */ 567 void board_init_f(ulong dummy) 568 { 569 /* setup AIPS and disable watchdog */ 570 arch_cpu_init(); 571 572 ccgr_init(); 573 gpr_init(); 574 575 /* setup GP timer */ 576 timer_init(); 577 578 #ifdef CONFIG_BOARD_POSTCLK_INIT 579 board_postclk_init(); 580 #endif 581 #ifdef CONFIG_FSL_ESDHC 582 get_clocks(); 583 #endif 584 585 /* Setup IOMUX and configure basics. */ 586 novena_spl_setup_iomux_audio(); 587 novena_spl_setup_iomux_buttons(); 588 novena_spl_setup_iomux_enet(); 589 novena_spl_setup_iomux_fpga(); 590 novena_spl_setup_iomux_i2c(); 591 novena_spl_setup_iomux_pcie(); 592 novena_spl_setup_iomux_sdhc(); 593 novena_spl_setup_iomux_spi(); 594 novena_spl_setup_iomux_uart(); 595 novena_spl_setup_iomux_video(); 596 597 /* UART clocks enabled and gd valid - init serial console */ 598 preloader_console_init(); 599 600 /* Start the DDR DRAM */ 601 mx6dq_dram_iocfg(64, &novena_ddr_ioregs, &novena_grp_ioregs); 602 mx6_dram_cfg(&novena_ddr_info, &novena_mmdc_calib, &elpida_4gib_1600); 603 604 /* Clear the BSS. */ 605 memset(__bss_start, 0, __bss_end - __bss_start); 606 607 /* load/boot image from boot device */ 608 board_init_r(NULL, 0); 609 } 610 611 void reset_cpu(ulong addr) 612 { 613 } 614