1 /* 2 * (C) Copyright 2013 Keymile AG 3 * Valentin Longchamp <valentin.longchamp@keymile.com> 4 * 5 * Copyright 2009-2011 Freescale Semiconductor, Inc. 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #include <common.h> 11 #include <i2c.h> 12 #include <hwconfig.h> 13 #include <asm/mmu.h> 14 #include <fsl_ddr_sdram.h> 15 #include <fsl_ddr_dimm_params.h> 16 17 DECLARE_GLOBAL_DATA_PTR; 18 19 void fsl_ddr_board_options(memctl_options_t *popts, 20 dimm_params_t *pdimm, 21 unsigned int ctrl_num) 22 { 23 if (ctrl_num) { 24 printf("Wrong parameter for controller number %d", ctrl_num); 25 return; 26 } 27 28 /* automatic calibration for nb of cycles between read and DQS pre */ 29 popts->cpo_override = 0xFF; 30 31 /* 1/2 clk delay between wr command and data strobe */ 32 popts->write_data_delay = 4; 33 /* clk lauched 1/2 applied cylcle after address command */ 34 popts->clk_adjust = 4; 35 /* 1T timing: command/address held for only 1 cycle */ 36 popts->twot_en = 0; 37 38 /* we have only one module, half str should be OK */ 39 popts->half_strength_driver_enable = 1; 40 41 /* wrlvl values overridden as recommended by ddr init func */ 42 popts->wrlvl_override = 1; 43 popts->wrlvl_sample = 0xf; 44 popts->wrlvl_start = 0x6; 45 46 /* Enable ZQ calibration */ 47 popts->zq_en = 1; 48 49 /* DHC_EN =1, ODT = 75 Ohm */ 50 popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR_ODT_75ohm; 51 } 52 53 int initdram(void) 54 { 55 phys_size_t dram_size = 0; 56 57 puts("Initializing with SPD\n"); 58 59 dram_size = fsl_ddr_sdram(); 60 61 dram_size = setup_ddr_tlbs(dram_size / 0x100000); 62 dram_size *= 0x100000; 63 64 debug(" DDR: "); 65 gd->ram_size = dram_size; 66 67 return 0; 68 } 69