1#
2# (C) Copyright 2010
3# Heiko Schocher, DENX Software Engineering, hs@denx.de.
4#
5# (C) Copyright 2011
6# Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
7#
8# See file CREDITS for list of people who contributed to this
9# project.
10#
11# This program is free software; you can redistribute it and/or
12# modify it under the terms of the GNU General Public License as
13# published by the Free Software Foundation; either version 2 of
14# the License, or (at your option) any later version.
15#
16# This program is distributed in the hope that it will be useful,
17# but WITHOUT ANY WARRANTY; without even the implied warranty of
18# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19# GNU General Public License for more details.
20#
21# You should have received a copy of the GNU General Public License
22# along with this program; if not, write to the Free Software
23# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
24# MA 02110-1301 USA
25#
26# Refer docs/README.kwimage for more details about how-to configure
27# and create kirkwood boot image
28#
29
30# Boot Media configurations
31BOOT_FROM	spi	# Boot from SPI flash
32
33DATA 0xFFD10000 0x01112222	# MPP Control 0 Register
34# bit 3-0:   MPPSel0	2, NF_IO[2]
35# bit 7-4:   MPPSel1	2, NF_IO[3]
36# bit 12-8:  MPPSel2	2, NF_IO[4]
37# bit 15-12: MPPSel3	2, NF_IO[5]
38# bit 19-16: MPPSel4	1, NF_IO[6]
39# bit 23-20: MPPSel5	1, NF_IO[7]
40# bit 27-24: MPPSel6	1, SYSRST_O
41# bit 31-28: MPPSel7	0, GPO[7]
42
43DATA 0xFFD10004 0x03303300
44
45DATA 0xFFD10008 0x00001100	# MPP Control 2 Register
46# bit 3-0:   MPPSel16	0, GPIO[16]
47# bit 7-4:   MPPSel17	0, GPIO[17]
48# bit 12-8:  MPPSel18	1, NF_IO[0]
49# bit 15-12: MPPSel19	1, NF_IO[1]
50# bit 19-16: MPPSel20	0, GPIO[20]
51# bit 23-20: MPPSel21	0, GPIO[21]
52# bit 27-24: MPPSel22	0, GPIO[22]
53# bit 31-28: MPPSel23	0, GPIO[23]
54
55DATA 0xFFD100E0 0x1B1B1B1B	# IO Configuration 0 Register
56DATA 0xFFD20134 0x66666666	# L2 RAM Timing 0 Register
57DATA 0xFFD20138 0x66666666	# L2 RAM Timing 1 Register
58
59# NOTE: Don't write on 0x20148 , 0x2014c and 0x20154, leave them untouched!
60# If not it could cause KW Exceptions during boot in Fast Corners/High Voltage
61
62#Dram initalization
63DATA 0xFFD01400 0x430004E0	# SDRAM Configuration Register
64# bit13-0:  0x4E0 (DDR2 clks refresh rate)
65# bit23-14: zero
66# bit24: 1= enable exit self refresh mode on DDR access
67# bit25: 1 required
68# bit29-26: zero
69# bit31-30: 01
70
71DATA 0xFFD01404 0x38543000	# DDR Controller Control Low
72# bit 3-0:  0 reserved
73# bit 4:    0=addr/cmd in smame cycle
74# bit 5:    0=clk is driven during self refresh, we don't care for APX
75# bit 6:    0=use recommended falling edge of clk for addr/cmd
76# bit14:    0=input buffer always powered up
77# bit18:    1=cpu lock transaction enabled
78# bit23-20: 5=recommended value for CL=4 and STARTBURST_DEL disabled bit31=0
79# bit27-24: 8= CL+4, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM
80# bit30-28: 3 required
81# bit31:    0=no additional STARTBURST delay
82
83DATA 0xFFD01408 0x2302433E	# DDR Timing (Low) (active cycles value +1)
84# bit3-0:   TRAS lsbs
85# bit7-4:   TRCD
86# bit11- 8: TRP
87# bit15-12: TWR
88# bit19-16: TWTR
89# bit20:    TRAS msb
90# bit23-21: 0x0
91# bit27-24: TRRD
92# bit31-28: TRTP
93
94DATA 0xFFD0140C 0x00000A3E	#  DDR Timing (High)
95# bit6-0:   TRFC
96# bit8-7:   TR2R
97# bit10-9:  TR2W
98# bit12-11: TW2W
99# bit31-13: zero required
100
101DATA 0xFFD01410 0x00000001	#  DDR Address Control
102# bit1-0:   01, Cs0width=x16
103# bit3-2:   00, Cs0size=2Gb
104# bit5-4:   00, Cs2width=nonexistent
105# bit7-6:   00, Cs1size =nonexistent
106# bit9-8:   00, Cs2width=nonexistent
107# bit11-10: 00, Cs2size =nonexistent
108# bit13-12: 00, Cs3width=nonexistent
109# bit15-14: 00, Cs3size =nonexistent
110# bit16:    0,  Cs0AddrSel
111# bit17:    0,  Cs1AddrSel
112# bit18:    0,  Cs2AddrSel
113# bit19:    0,  Cs3AddrSel
114# bit31-20: 0 required
115
116DATA 0xFFD01414 0x00000000	#  DDR Open Pages Control
117# bit0:    0,  OpenPage enabled
118# bit31-1: 0 required
119
120DATA 0xFFD01418 0x00000000	#  DDR Operation
121# bit3-0:   0x0, DDR cmd
122# bit31-4:  0 required
123
124DATA 0xFFD0141C 0x00000652	#  DDR Mode
125DATA 0xFFD01420 0x00000006	#  DDR Extended Mode
126# bit0:    0,  DDR DLL enabled
127# bit1:    1,  DDR drive strenght reduced
128# bit2:    1,  DDR ODT control lsd disabled
129# bit5-3:  000, required
130# bit6:    0,  DDR ODT control msb disabled
131# bit9-7:  000, required
132# bit10:   0,  differential DQS enabled
133# bit11:   0, required
134# bit12:   0, DDR output buffer enabled
135# bit31-13: 0 required
136
137DATA 0xFFD01424 0x0000F17F	#  DDR Controller Control High
138# bit2-0:  111, required
139# bit3  :  1  , MBUS Burst Chop disabled
140# bit6-4:  111, required
141# bit7  :  0
142# bit8  :  1  , add a sample stage
143# bit9  :  0  , no half clock cycle addition to dataout
144# bit10 :  0  , 1/4 clock cycle skew enabled for addr/ctl signals
145# bit11 :  0  , 1/4 clock cycle skew disabled for write mesh
146# bit15-12: 1111 required
147# bit31-16: 0    required
148
149DATA 0xFFD01428 0x00084520	# DDR2 SDRAM Timing Low
150# bit3-0  : 0000, required
151# bit7-4  : 0010, M_ODT assertion 2 cycles after read
152# bit11-8 : 0101, M_ODT de-assertion 5 cycles after read
153# bit15-12: 0100, internal ODT assertion 4 cycles after read
154# bit19-16: 1000, internal ODT de-assertion 8 cycles after read
155# bit31-20: 0   , required
156
157DATA 0xFFD0147c 0x00008451	# DDR2 SDRAM Timing High
158# bit3-0  : 0001, M_ODT assertion same cycle as write
159# bit7-4  : 0101, M_ODT de-assertion x cycles after write
160# bit11-8 : 0100, internal ODT assertion x cycles after write
161# bit15-12: 1000, internal ODT de-assertion x cycles after write
162
163DATA 0xFFD01500 0x00000000	# CS[0]n Base address to 0x0
164DATA 0xFFD01504 0x0FFFFFF1	# CS[0]n Size
165# bit0:    1,  Window enabled
166# bit1:    0,  Write Protect disabled
167# bit3-2:  00, CS0 hit selected
168# bit23-4: ones, required
169# bit31-24: 0x0F, Size (i.e. 256MB)
170
171DATA 0xFFD0150C 0x00000000	# CS[1]n Size, window disabled
172DATA 0xFFD01514 0x00000000	# CS[2]n Size, window disabled
173DATA 0xFFD0151C 0x00000000	# CS[3]n Size, window disabled
174
175DATA 0xFFD01494 0x00010000	#  DDR ODT Control (Low)
176# bit3-0:  0, ODT0Rd, MODT[0] not asserted during read from DRAM CS0
177# bit19-16:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0
178
179DATA 0xFFD01498 0x00000000	#  DDR ODT Control (High)
180# bit1-0:  00, ODT0 controlled by ODT Control (low) register above
181# bit3-2:  00, ODT1 controlled by register
182# bit31-4: zero, required
183
184DATA 0xFFD0149C 0x0000F801	# CPU ODT Control
185# bit3-0:  1, ODT0Rd, Internal ODT asserted during read from DRAM bank0
186# bit7-4:  0, ODT0Wr, Internal ODT not asserted during write to DRAM bank0
187# bit9-8:  0, ODTEn, controlled by ODT0Rd and ODT0Wr
188# bit11-10:2, DQ_ODTSel. ODT select turned on, 75 ohm
189# bit13-12:3, STARTBURST ODT buffer selected, 50 ohm
190# bit14   :1, STARTBURST ODT enabled
191# bit15   :1, Use ODT Block
192
193DATA 0xFFD01480 0x00000001	# DDR Initialization Control
194# bit0=1, enable DDR init upon this register write
195
196# End of Header extension
197DATA 0x0 0x0
198