1 /* 2 * (C) Copyright 2009 3 * Marvell Semiconductor <www.marvell.com> 4 * Prafulla Wadaskar <prafulla@marvell.com> 5 * 6 * (C) Copyright 2009 7 * Stefan Roese, DENX Software Engineering, sr@denx.de. 8 * 9 * (C) Copyright 2010 10 * Heiko Schocher, DENX Software Engineering, hs@denx.de. 11 * 12 * See file CREDITS for list of people who contributed to this 13 * project. 14 * 15 * This program is free software; you can redistribute it and/or 16 * modify it under the terms of the GNU General Public License as 17 * published by the Free Software Foundation; either version 2 of 18 * the License, or (at your option) any later version. 19 * 20 * This program is distributed in the hope that it will be useful, 21 * but WITHOUT ANY WARRANTY; without even the implied warranty of 22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 23 * GNU General Public License for more details. 24 * 25 * You should have received a copy of the GNU General Public License 26 * along with this program; if not, write to the Free Software 27 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, 28 * MA 02110-1301 USA 29 */ 30 31 #include <common.h> 32 #include <i2c.h> 33 #include <nand.h> 34 #include <netdev.h> 35 #include <miiphy.h> 36 #include <asm/io.h> 37 #include <asm/arch/kirkwood.h> 38 #include <asm/arch/mpp.h> 39 40 #include "../common/common.h" 41 42 DECLARE_GLOBAL_DATA_PTR; 43 44 static int io_dev; 45 extern I2C_MUX_DEVICE *i2c_mux_ident_muxstring (uchar *buf); 46 47 /* Multi-Purpose Pins Functionality configuration */ 48 u32 kwmpp_config[] = { 49 MPP0_NF_IO2, 50 MPP1_NF_IO3, 51 MPP2_NF_IO4, 52 MPP3_NF_IO5, 53 MPP4_NF_IO6, 54 MPP5_NF_IO7, 55 MPP6_SYSRST_OUTn, 56 MPP7_PEX_RST_OUTn, 57 #if defined(CONFIG_SOFT_I2C) 58 MPP8_GPIO, /* SDA */ 59 MPP9_GPIO, /* SCL */ 60 #endif 61 #if defined(CONFIG_HARD_I2C) 62 MPP8_TW_SDA, 63 MPP9_TW_SCK, 64 #endif 65 MPP10_UART0_TXD, 66 MPP11_UART0_RXD, 67 MPP12_GPO, /* Reserved */ 68 MPP13_UART1_TXD, 69 MPP14_UART1_RXD, 70 MPP15_GPIO, /* Not used */ 71 MPP16_GPIO, /* Not used */ 72 MPP17_GPIO, /* Reserved */ 73 MPP18_NF_IO0, 74 MPP19_NF_IO1, 75 MPP20_GPIO, 76 MPP21_GPIO, 77 MPP22_GPIO, 78 MPP23_GPIO, 79 MPP24_GPIO, 80 MPP25_GPIO, 81 MPP26_GPIO, 82 MPP27_GPIO, 83 MPP28_GPIO, 84 MPP29_GPIO, 85 MPP30_GPIO, 86 MPP31_GPIO, 87 MPP32_GPIO, 88 MPP33_GPIO, 89 MPP34_GPIO, /* CDL1 (input) */ 90 MPP35_GPIO, /* CDL2 (input) */ 91 MPP36_GPIO, /* MAIN_IRQ (input) */ 92 MPP37_GPIO, /* BOARD_LED */ 93 MPP38_GPIO, /* Piggy3 LED[1] */ 94 MPP39_GPIO, /* Piggy3 LED[2] */ 95 MPP40_GPIO, /* Piggy3 LED[3] */ 96 MPP41_GPIO, /* Piggy3 LED[4] */ 97 MPP42_GPIO, /* Piggy3 LED[5] */ 98 MPP43_GPIO, /* Piggy3 LED[6] */ 99 MPP44_GPIO, /* Piggy3 LED[7] */ 100 MPP45_GPIO, /* Piggy3 LED[8] */ 101 MPP46_GPIO, /* Reserved */ 102 MPP47_GPIO, /* Reserved */ 103 MPP48_GPIO, /* Reserved */ 104 MPP49_GPIO, /* SW_INTOUTn */ 105 0 106 }; 107 108 int ethernet_present(void) 109 { 110 uchar buf; 111 int ret = 0; 112 113 if (i2c_read(0x10, 2, 1, &buf, 1) != 0) { 114 printf ("%s: Error reading Boco\n", __FUNCTION__); 115 return -1; 116 } 117 if ((buf & 0x40) == 0x40) { 118 ret = 1; 119 } 120 return ret; 121 } 122 123 int misc_init_r(void) 124 { 125 I2C_MUX_DEVICE *i2cdev; 126 char *str; 127 int mach_type; 128 129 /* add I2C Bus for I/O Expander */ 130 i2cdev = i2c_mux_ident_muxstring((uchar *)"pca9554a:70:a"); 131 io_dev = i2cdev->busid; 132 puts("Piggy:"); 133 if (ethernet_present() == 0) 134 puts (" not"); 135 puts(" present\n"); 136 137 str = getenv("mach_type"); 138 if (str != NULL) { 139 mach_type = simple_strtoul(str, NULL, 10); 140 printf("Overwriting MACH_TYPE with %d!!!\n", mach_type); 141 gd->bd->bi_arch_number = mach_type; 142 } 143 return 0; 144 } 145 146 int board_init(void) 147 { 148 u32 tmp; 149 150 kirkwood_mpp_conf(kwmpp_config); 151 152 /* 153 * The FLASH_GPIO_PIN switches between using a 154 * NAND or a SPI FLASH. Set this pin on start 155 * to NAND mode. 156 */ 157 tmp = readl(KW_GPIO0_BASE); 158 writel(tmp | FLASH_GPIO_PIN , KW_GPIO0_BASE); 159 tmp = readl(KW_GPIO0_BASE + 4); 160 writel(tmp & (~FLASH_GPIO_PIN) , KW_GPIO0_BASE + 4); 161 printf("KM: setting NAND mode\n"); 162 163 /* 164 * arch number of board 165 */ 166 gd->bd->bi_arch_number = MACH_TYPE_SUEN3; 167 168 /* address of boot parameters */ 169 gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100; 170 171 #if defined(CONFIG_SOFT_I2C) 172 /* init the GPIO for I2C Bitbang driver */ 173 kw_gpio_set_valid(SUEN3_SDA_PIN, 1); 174 kw_gpio_set_valid(SUEN3_SCL_PIN, 1); 175 kw_gpio_direction_output(SUEN3_SDA_PIN, 0); 176 kw_gpio_direction_output(SUEN3_SCL_PIN, 0); 177 #endif 178 #if defined(CONFIG_SYS_EEPROM_WREN) 179 kw_gpio_set_valid(SUEN3_ENV_WP, 38); 180 kw_gpio_direction_output(SUEN3_ENV_WP, 1); 181 #endif 182 return 0; 183 } 184 185 #if defined(CONFIG_CMD_SF) 186 int do_spi_toggle(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) 187 { 188 u32 tmp; 189 if (argc < 2) { 190 cmd_usage(cmdtp); 191 return 1; 192 } 193 194 if ((strcmp(argv[1], "off") == 0)) { 195 printf("SPI FLASH disabled, NAND enabled\n"); 196 /* Multi-Purpose Pins Functionality configuration */ 197 kwmpp_config[0] = MPP0_NF_IO2; 198 kwmpp_config[1] = MPP1_NF_IO3; 199 kwmpp_config[2] = MPP2_NF_IO4; 200 kwmpp_config[3] = MPP3_NF_IO5; 201 202 kirkwood_mpp_conf(kwmpp_config); 203 tmp = readl(KW_GPIO0_BASE); 204 writel(tmp | FLASH_GPIO_PIN , KW_GPIO0_BASE); 205 } else if ((strcmp(argv[1], "on") == 0)) { 206 printf("SPI FLASH enabled, NAND disabled\n"); 207 /* Multi-Purpose Pins Functionality configuration */ 208 kwmpp_config[0] = MPP0_SPI_SCn; 209 kwmpp_config[1] = MPP1_SPI_MOSI; 210 kwmpp_config[2] = MPP2_SPI_SCK; 211 kwmpp_config[3] = MPP3_SPI_MISO; 212 213 kirkwood_mpp_conf(kwmpp_config); 214 tmp = readl(KW_GPIO0_BASE); 215 writel(tmp & (~FLASH_GPIO_PIN) , KW_GPIO0_BASE); 216 } else { 217 cmd_usage(cmdtp); 218 return 1; 219 } 220 221 return 0; 222 } 223 224 U_BOOT_CMD( 225 spitoggle, 2, 0, do_spi_toggle, 226 "En-/disable SPI FLASH access", 227 "<on|off> - Enable (on) or disable (off) SPI FLASH access\n" 228 ); 229 #endif 230 231 int dram_init(void) 232 { 233 int i; 234 235 for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { 236 gd->bd->bi_dram[i].start = kw_sdram_bar(i); 237 gd->bd->bi_dram[i].size = get_ram_size((long *)kw_sdram_bar(i), 238 kw_sdram_bs(i)); 239 } 240 return 0; 241 } 242 243 /* Configure and enable MV88E1118 PHY */ 244 void reset_phy(void) 245 { 246 char *name = "egiga0"; 247 248 if (miiphy_set_current_dev(name)) 249 return; 250 251 /* reset the phy */ 252 miiphy_reset(name, CONFIG_PHY_BASE_ADR); 253 } 254 255 #if defined(CONFIG_HUSH_INIT_VAR) 256 int hush_init_var (void) 257 { 258 ivm_read_eeprom (); 259 return 0; 260 } 261 #endif 262 263 #if defined(CONFIG_BOOTCOUNT_LIMIT) 264 void bootcount_store (ulong a) 265 { 266 volatile ulong *save_addr; 267 volatile ulong size = 0; 268 int i; 269 for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { 270 size += gd->bd->bi_dram[i].size; 271 } 272 save_addr = (ulong*)(size - BOOTCOUNT_ADDR); 273 writel(a, save_addr); 274 writel(BOOTCOUNT_MAGIC, &save_addr[1]); 275 } 276 277 ulong bootcount_load (void) 278 { 279 volatile ulong *save_addr; 280 volatile ulong size = 0; 281 int i; 282 for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { 283 size += gd->bd->bi_dram[i].size; 284 } 285 save_addr = (ulong*)(size - BOOTCOUNT_ADDR); 286 if (readl(&save_addr[1]) != BOOTCOUNT_MAGIC) 287 return 0; 288 else 289 return readl(save_addr); 290 } 291 #endif 292 293 #if defined(CONFIG_SOFT_I2C) 294 void set_sda (int state) 295 { 296 I2C_ACTIVE; 297 I2C_SDA(state); 298 } 299 300 void set_scl (int state) 301 { 302 I2C_SCL(state); 303 } 304 305 int get_sda (void) 306 { 307 I2C_TRISTATE; 308 return I2C_READ; 309 } 310 311 int get_scl (void) 312 { 313 return (kw_gpio_get_value(SUEN3_SCL_PIN) ? 1 : 0); 314 } 315 #endif 316 317 #if defined(CONFIG_SYS_EEPROM_WREN) 318 int eeprom_write_enable (unsigned dev_addr, int state) 319 { 320 kw_gpio_set_value(SUEN3_ENV_WP, !state); 321 322 return !kw_gpio_get_value(SUEN3_ENV_WP); 323 } 324 #endif 325