xref: /openbmc/u-boot/board/isee/igep003x/board.c (revision a818704b)
1 /*
2  * Board functions for IGEP COM AQUILA and SMARC AM335x based boards
3  *
4  * Copyright (C) 2013-2017, ISEE 2007 SL - http://www.isee.biz/
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 
9 #include <common.h>
10 #include <errno.h>
11 #include <spl.h>
12 #include <asm/arch/cpu.h>
13 #include <asm/arch/hardware.h>
14 #include <asm/arch/omap.h>
15 #include <asm/arch/ddr_defs.h>
16 #include <asm/arch/clock.h>
17 #include <asm/arch/gpio.h>
18 #include <asm/arch/mmc_host_def.h>
19 #include <asm/arch/sys_proto.h>
20 #include <asm/io.h>
21 #include <asm/emif.h>
22 #include <asm/gpio.h>
23 #include <i2c.h>
24 #include <miiphy.h>
25 #include <cpsw.h>
26 #include <fdt_support.h>
27 #include <mtd_node.h>
28 #include <jffs2/load_kernel.h>
29 #include <environment.h>
30 #include "board.h"
31 
32 DECLARE_GLOBAL_DATA_PTR;
33 
34 /* GPIO0_27 and GPIO0_26 are used to read board revision from IGEP003x boards
35  * and control IGEP0034 green and red LEDs.
36  * U-boot configures these pins as input pullup to detect board revision:
37  * IGEP0034-LITE = 0b00
38  * IGEP0034 (FULL) = 0b01
39  * IGEP0033 = 0b1X
40  */
41 #define GPIO_GREEN_REVISION	27
42 #define GPIO_RED_REVISION	26
43 
44 static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
45 
46 /*
47  * Routine: get_board_revision
48  * Description: Returns the board revision
49  */
50 static int get_board_revision(void)
51 {
52 	int revision;
53 
54 	gpio_request(GPIO_GREEN_REVISION, "green_revision");
55 	gpio_direction_input(GPIO_GREEN_REVISION);
56 	revision = 2 * gpio_get_value(GPIO_GREEN_REVISION);
57 	gpio_free(GPIO_GREEN_REVISION);
58 
59 	gpio_request(GPIO_RED_REVISION, "red_revision");
60 	gpio_direction_input(GPIO_RED_REVISION);
61 	revision = revision + gpio_get_value(GPIO_RED_REVISION);
62 	gpio_free(GPIO_RED_REVISION);
63 
64 	return revision;
65 }
66 
67 #ifdef CONFIG_SPL_BUILD
68 /* PN H5TQ4G63AFR is equivalent to MT41K256M16HA125*/
69 static const struct ddr_data ddr3_igep0034_data = {
70 	.datardsratio0 = MT41K256M16HA125E_RD_DQS,
71 	.datawdsratio0 = MT41K256M16HA125E_WR_DQS,
72 	.datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE,
73 	.datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA,
74 };
75 
76 static const struct ddr_data ddr3_igep0034_lite_data = {
77 	.datardsratio0 = K4B2G1646EBIH9_RD_DQS,
78 	.datawdsratio0 = K4B2G1646EBIH9_WR_DQS,
79 	.datafwsratio0 = K4B2G1646EBIH9_PHY_FIFO_WE,
80 	.datawrsratio0 = K4B2G1646EBIH9_PHY_WR_DATA,
81 };
82 
83 static const struct cmd_control ddr3_igep0034_cmd_ctrl_data = {
84 	.cmd0csratio = MT41K256M16HA125E_RATIO,
85 	.cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
86 
87 	.cmd1csratio = MT41K256M16HA125E_RATIO,
88 	.cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
89 
90 	.cmd2csratio = MT41K256M16HA125E_RATIO,
91 	.cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
92 };
93 
94 static const struct cmd_control ddr3_igep0034_lite_cmd_ctrl_data = {
95 	.cmd0csratio = K4B2G1646EBIH9_RATIO,
96 	.cmd0iclkout = K4B2G1646EBIH9_INVERT_CLKOUT,
97 
98 	.cmd1csratio = K4B2G1646EBIH9_RATIO,
99 	.cmd1iclkout = K4B2G1646EBIH9_INVERT_CLKOUT,
100 
101 	.cmd2csratio = K4B2G1646EBIH9_RATIO,
102 	.cmd2iclkout = K4B2G1646EBIH9_INVERT_CLKOUT,
103 };
104 
105 static struct emif_regs ddr3_igep0034_emif_reg_data = {
106 	.sdram_config = MT41K256M16HA125E_EMIF_SDCFG,
107 	.ref_ctrl = MT41K256M16HA125E_EMIF_SDREF,
108 	.sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1,
109 	.sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2,
110 	.sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3,
111 	.zq_config = MT41K256M16HA125E_ZQ_CFG,
112 	.emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY,
113 };
114 
115 static struct emif_regs ddr3_igep0034_lite_emif_reg_data = {
116 	.sdram_config = K4B2G1646EBIH9_EMIF_SDCFG,
117 	.ref_ctrl = K4B2G1646EBIH9_EMIF_SDREF,
118 	.sdram_tim1 = K4B2G1646EBIH9_EMIF_TIM1,
119 	.sdram_tim2 = K4B2G1646EBIH9_EMIF_TIM2,
120 	.sdram_tim3 = K4B2G1646EBIH9_EMIF_TIM3,
121 	.zq_config = K4B2G1646EBIH9_ZQ_CFG,
122 	.emif_ddr_phy_ctlr_1 = K4B2G1646EBIH9_EMIF_READ_LATENCY,
123 };
124 
125 const struct ctrl_ioregs ioregs_igep0034 = {
126 	.cm0ioctl		= MT41K256M16HA125E_IOCTRL_VALUE,
127 	.cm1ioctl		= MT41K256M16HA125E_IOCTRL_VALUE,
128 	.cm2ioctl		= MT41K256M16HA125E_IOCTRL_VALUE,
129 	.dt0ioctl		= MT41K256M16HA125E_IOCTRL_VALUE,
130 	.dt1ioctl		= MT41K256M16HA125E_IOCTRL_VALUE,
131 };
132 
133 const struct ctrl_ioregs ioregs_igep0034_lite = {
134 	.cm0ioctl		= K4B2G1646EBIH9_IOCTRL_VALUE,
135 	.cm1ioctl		= K4B2G1646EBIH9_IOCTRL_VALUE,
136 	.cm2ioctl		= K4B2G1646EBIH9_IOCTRL_VALUE,
137 	.dt0ioctl		= K4B2G1646EBIH9_IOCTRL_VALUE,
138 	.dt1ioctl		= K4B2G1646EBIH9_IOCTRL_VALUE,
139 };
140 
141 #define OSC    (V_OSCK/1000000)
142 const struct dpll_params dpll_ddr = {
143 		400, OSC-1, 1, -1, -1, -1, -1};
144 
145 const struct dpll_params *get_dpll_ddr_params(void)
146 {
147 	return &dpll_ddr;
148 }
149 
150 void set_uart_mux_conf(void)
151 {
152 	enable_uart0_pin_mux();
153 }
154 
155 void set_mux_conf_regs(void)
156 {
157 	enable_board_pin_mux();
158 }
159 
160 void sdram_init(void)
161 {
162 	if (get_board_revision() == 1)
163 		config_ddr(400, &ioregs_igep0034, &ddr3_igep0034_data,
164 			&ddr3_igep0034_cmd_ctrl_data, &ddr3_igep0034_emif_reg_data, 0);
165 	else
166 		config_ddr(400, &ioregs_igep0034_lite, &ddr3_igep0034_lite_data,
167 			&ddr3_igep0034_lite_cmd_ctrl_data, &ddr3_igep0034_lite_emif_reg_data, 0);
168 }
169 
170 #ifdef CONFIG_SPL_OS_BOOT
171 int spl_start_uboot(void)
172 {
173 	/* break into full u-boot on 'c' */
174 	return serial_tstc() && serial_getc() == 'c';
175 }
176 #endif
177 #endif
178 
179 /*
180  * Basic board specific setup.  Pinmux has been handled already.
181  */
182 int board_init(void)
183 {
184 	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
185 
186 	gpmc_init();
187 
188 	return 0;
189 }
190 
191 #ifdef CONFIG_BOARD_LATE_INIT
192 int board_late_init(void)
193 {
194 #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
195 	switch (get_board_revision()) {
196 		case 0:
197 			setenv("board_name", "igep0034-lite");
198 			break;
199 		case 1:
200 			setenv("board_name", "igep0034");
201 			break;
202 		default:
203 			setenv("board_name", "igep0033");
204 			break;
205 	}
206 #endif
207 	return 0;
208 }
209 #endif
210 
211 #ifdef CONFIG_OF_BOARD_SETUP
212 int ft_board_setup(void *blob, bd_t *bd)
213 {
214 #ifdef CONFIG_FDT_FIXUP_PARTITIONS
215 	static struct node_info nodes[] = {
216 		{ "ti,omap2-nand", MTD_DEV_TYPE_NAND, },
217 	};
218 
219 	fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
220 #endif
221 	return 0;
222 }
223 #endif
224 
225 #if defined(CONFIG_DRIVER_TI_CPSW)
226 static void cpsw_control(int enabled)
227 {
228 	/* VTP can be added here */
229 
230 	return;
231 }
232 
233 static struct cpsw_slave_data cpsw_slaves[] = {
234 	{
235 		.slave_reg_ofs	= 0x208,
236 		.sliver_reg_ofs	= 0xd80,
237 		.phy_addr	= 0,
238 		.phy_if		= PHY_INTERFACE_MODE_RMII,
239 	},
240 };
241 
242 static struct cpsw_platform_data cpsw_data = {
243 	.mdio_base		= CPSW_MDIO_BASE,
244 	.cpsw_base		= CPSW_BASE,
245 	.mdio_div		= 0xff,
246 	.channels		= 8,
247 	.cpdma_reg_ofs		= 0x800,
248 	.slaves			= 1,
249 	.slave_data		= cpsw_slaves,
250 	.ale_reg_ofs		= 0xd00,
251 	.ale_entries		= 1024,
252 	.host_port_reg_ofs	= 0x108,
253 	.hw_stats_reg_ofs	= 0x900,
254 	.bd_ram_ofs		= 0x2000,
255 	.mac_control		= (1 << 5),
256 	.control		= cpsw_control,
257 	.host_port_num		= 0,
258 	.version		= CPSW_CTRL_VERSION_2,
259 };
260 
261 int board_eth_init(bd_t *bis)
262 {
263 	int rv, ret = 0;
264 	uint8_t mac_addr[6];
265 	uint32_t mac_hi, mac_lo;
266 
267 	if (!eth_getenv_enetaddr("ethaddr", mac_addr)) {
268 		/* try reading mac address from efuse */
269 		mac_lo = readl(&cdev->macid0l);
270 		mac_hi = readl(&cdev->macid0h);
271 		mac_addr[0] = mac_hi & 0xFF;
272 		mac_addr[1] = (mac_hi & 0xFF00) >> 8;
273 		mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
274 		mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
275 		mac_addr[4] = mac_lo & 0xFF;
276 		mac_addr[5] = (mac_lo & 0xFF00) >> 8;
277 		if (is_valid_ethaddr(mac_addr))
278 			eth_setenv_enetaddr("ethaddr", mac_addr);
279 	}
280 
281 	writel((GMII1_SEL_RMII | RMII1_IO_CLK_EN),
282 	       &cdev->miisel);
283 
284 	if (get_board_revision() == 1)
285 		cpsw_slaves[0].phy_addr = 1;
286 
287 	rv = cpsw_register(&cpsw_data);
288 	if (rv < 0)
289 		printf("Error %d registering CPSW switch\n", rv);
290 	else
291 		ret += rv;
292 
293 	return ret;
294 }
295 #endif
296