1# 2# Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com> 3# 4# SPDX-License-Identifier: GPL-2.0+ 5# 6 7if VENDOR_INTEL 8 9choice 10 prompt "Mainboard model" 11 optional 12 13config TARGET_CROWNBAY 14 bool "Crown Bay" 15 help 16 This is the Intel Crown Bay Customer Reference Board. It contains 17 the Intel Atom Processor E6xx populated on the COM Express module 18 with 1GB DDR2 soldered down memory and a carrier board with the 19 Intel Platform Controller Hub EG20T, other system components and 20 peripheral connectors for PCIe/SATA/USB/LAN/SD/UART/Audio/LVDS. 21 22config TARGET_GALILEO 23 bool "Galileo" 24 help 25 This is the Intel Galileo board, which is the first in a family of 26 Arduino-certified development and prototyping boards based on Intel 27 architecture. It includes an Intel Quark SoC X1000 processor, a 32-bit 28 single-core, single-thread, Intel Pentium processor instrunction set 29 architecture (ISA) compatible, operating at speeds up to 400Mhz, 30 along with 256MB DDR3 memory. It supports a wide range of industry 31 standard I/O interfaces, including a full-sized mini-PCIe slot, 32 one 100Mb Ethernet port, a microSD card slot, a USB host port and 33 a USB client port. 34 35config TARGET_MINNOWMAX 36 bool "Minnowboard MAX" 37 help 38 This is the Intel Minnowboard MAX. It contains an Atom E3800 39 processor in a small form factor with Ethernet, micro-SD, USB 2, 40 USB 3, SATA, serial console, some GPIOs and HDMI 1.3 video out. 41 It requires some binary blobs - see README.x86 for details. 42 43 Note that PCIE_ECAM_BASE is set up by the FSP so the value used 44 by U-Boot matches that value. 45 46endchoice 47 48source "board/intel/crownbay/Kconfig" 49source "board/intel/galileo/Kconfig" 50source "board/intel/minnowmax/Kconfig" 51 52endif 53