1# 2# Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com> 3# 4# SPDX-License-Identifier: GPL-2.0+ 5# 6 7if VENDOR_INTEL 8 9choice 10 prompt "Mainboard model" 11 optional 12 13config TARGET_BAYLEYBAY 14 bool "Bayley Bay" 15 help 16 This is the Intel Bayley Bay Customer Reference Board. It contains an 17 Intel quad-core Atom Processor E3800 with dual-channel DDR3L SODIMM 18 4GB memory, HDMI/DP/VGA display, HD audio, SATA, USB2, USB3, SD, eMMC, 19 PCIe and some other sensor interfaces. 20 21config TARGET_COUGARCANYON2 22 bool "Cougar Canyon 2" 23 help 24 This is the Intel Cougar Canyon 2 Customer Reference Board. It 25 is built on the Chief River platform with Intel Ivybridge Processor 26 and Panther Point chipset. The board has 4GB RAM, with some other 27 peripheral connectors for PCIe/SATA/USB2/USB3/LAN/UART/PS2/VGA/HDMI. 28 29config TARGET_CROWNBAY 30 bool "Crown Bay" 31 help 32 This is the Intel Crown Bay Customer Reference Board. It contains 33 the Intel Atom Processor E6xx populated on the COM Express module 34 with 1GB DDR2 soldered down memory and a carrier board with the 35 Intel Platform Controller Hub EG20T, other system components and 36 peripheral connectors for PCIe/SATA/USB/LAN/SD/UART/Audio/LVDS. 37 38config TARGET_GALILEO 39 bool "Galileo" 40 help 41 This is the Intel Galileo board, which is the first in a family of 42 Arduino-certified development and prototyping boards based on Intel 43 architecture. It includes an Intel Quark SoC X1000 processor, a 32-bit 44 single-core, single-thread, Intel Pentium processor instrunction set 45 architecture (ISA) compatible, operating at speeds up to 400Mhz, 46 along with 256MB DDR3 memory. It supports a wide range of industry 47 standard I/O interfaces, including a full-sized mini-PCIe slot, 48 one 100Mb Ethernet port, a microSD card slot, a USB host port and 49 a USB client port. 50 51config TARGET_MINNOWMAX 52 bool "Minnowboard MAX" 53 help 54 This is the Intel Minnowboard MAX. It contains an Atom E3800 55 processor in a small form factor with Ethernet, micro-SD, USB 2, 56 USB 3, SATA, serial console, some GPIOs and HDMI 1.3 video out. 57 It requires some binary blobs - see README.x86 for details. 58 59 Note that PCIE_ECAM_BASE is set up by the FSP so the value used 60 by U-Boot matches that value. 61 62endchoice 63 64source "board/intel/bayleybay/Kconfig" 65source "board/intel/cougarcanyon2/Kconfig" 66source "board/intel/crownbay/Kconfig" 67source "board/intel/galileo/Kconfig" 68source "board/intel/minnowmax/Kconfig" 69 70endif 71