1 /* 2 * (C) Copyright 2013 3 * Heiko Schocher, DENX Software Engineering, hs@denx.de. 4 * 5 * Based on: 6 * Copyright (c) 2011 IDS GmbH, Germany 7 * ids8313.c - ids8313 board support. 8 * 9 * Sergej Stepanov <ste@ids.de> 10 * Based on board/freescale/mpc8313erdb/mpc8313erdb.c 11 * 12 * SPDX-License-Identifier: GPL-2.0+ 13 */ 14 15 #include <common.h> 16 #include <mpc83xx.h> 17 #include <spi.h> 18 #include <libfdt.h> 19 20 DECLARE_GLOBAL_DATA_PTR; 21 /** CPLD contains the info about: 22 * - board type: *pCpld & 0xF0 23 * - hw-revision: *pCpld & 0x0F 24 * - cpld-revision: *pCpld+1 25 */ 26 int checkboard(void) 27 { 28 char *pcpld = (char *)CONFIG_SYS_CPLD_BASE; 29 u8 u8Vers = readb(pcpld); 30 u8 u8Revs = readb(pcpld + 1); 31 32 printf("Board: "); 33 switch (u8Vers & 0xF0) { 34 case '\x40': 35 printf("CU73X"); 36 break; 37 case '\x50': 38 printf("CC73X"); 39 break; 40 default: 41 printf("unknown(0x%02X, 0x%02X)\n", u8Vers, u8Revs); 42 return 0; 43 } 44 printf("\nInfo: HW-Rev: %i, CPLD-Rev: %i\n", 45 u8Vers & 0x0F, u8Revs & 0xFF); 46 return 0; 47 } 48 49 /* 50 * fixed sdram init 51 */ 52 int fixed_sdram(unsigned long config) 53 { 54 immap_t *im = (immap_t *)CONFIG_SYS_IMMR; 55 u32 msize = CONFIG_SYS_DDR_SIZE << 20; 56 57 #ifndef CONFIG_SYS_RAMBOOT 58 u32 msize_log2 = __ilog2(msize); 59 60 out_be32(&im->sysconf.ddrlaw[0].bar, 61 (CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000)); 62 out_be32(&im->sysconf.ddrlaw[0].ar, LBLAWAR_EN | (msize_log2 - 1)); 63 out_be32(&im->sysconf.ddrcdr, CONFIG_SYS_DDRCDR_VALUE); 64 sync(); 65 66 /* 67 * Erratum DDR3 requires a 50ms delay after clearing DDRCDR[DDR_cfg], 68 * or the DDR2 controller may fail to initialize correctly. 69 */ 70 udelay(50000); 71 72 out_be32(&im->ddr.csbnds[0].csbnds, (msize - 1) >> 24); 73 out_be32(&im->ddr.cs_config[0], config); 74 75 /* currently we use only one CS, so disable the other banks */ 76 out_be32(&im->ddr.cs_config[1], 0); 77 out_be32(&im->ddr.cs_config[2], 0); 78 out_be32(&im->ddr.cs_config[3], 0); 79 80 out_be32(&im->ddr.timing_cfg_3, CONFIG_SYS_DDR_TIMING_3); 81 out_be32(&im->ddr.timing_cfg_1, CONFIG_SYS_DDR_TIMING_1); 82 out_be32(&im->ddr.timing_cfg_2, CONFIG_SYS_DDR_TIMING_2); 83 out_be32(&im->ddr.timing_cfg_0, CONFIG_SYS_DDR_TIMING_0); 84 85 out_be32(&im->ddr.sdram_cfg, CONFIG_SYS_SDRAM_CFG); 86 out_be32(&im->ddr.sdram_cfg2, CONFIG_SYS_SDRAM_CFG2); 87 88 out_be32(&im->ddr.sdram_mode, CONFIG_SYS_DDR_MODE); 89 out_be32(&im->ddr.sdram_mode2, CONFIG_SYS_DDR_MODE_2); 90 91 out_be32(&im->ddr.sdram_interval, CONFIG_SYS_DDR_INTERVAL); 92 out_be32(&im->ddr.sdram_clk_cntl, CONFIG_SYS_DDR_CLK_CNTL); 93 sync(); 94 udelay(300); 95 96 /* enable DDR controller */ 97 setbits_be32(&im->ddr.sdram_cfg, SDRAM_CFG_MEM_EN); 98 /* now check the real size */ 99 disable_addr_trans(); 100 msize = get_ram_size(CONFIG_SYS_DDR_BASE, msize); 101 enable_addr_trans(); 102 #endif 103 return msize; 104 } 105 106 static int setup_sdram(void) 107 { 108 u32 msize = CONFIG_SYS_DDR_SIZE << 20; 109 long int size_01, size_02; 110 111 size_01 = fixed_sdram(CONFIG_SYS_DDR_CONFIG); 112 size_02 = fixed_sdram(CONFIG_SYS_DDR_CONFIG_256); 113 114 if (size_01 > size_02) 115 msize = fixed_sdram(CONFIG_SYS_DDR_CONFIG); 116 else 117 msize = size_02; 118 119 return msize; 120 } 121 122 phys_size_t initdram(int board_type) 123 { 124 immap_t *im = (immap_t *)CONFIG_SYS_IMMR; 125 fsl_lbc_t *lbc = &im->im_lbc; 126 u32 msize = 0; 127 128 if ((in_be32(&im->sysconf.immrbar) & IMMRBAR_BASE_ADDR) != (u32)im) 129 return -1; 130 131 msize = setup_sdram(); 132 133 out_be32(&lbc->lbcr, CONFIG_SYS_LBC_LBCR); 134 out_be32(&lbc->mrtpr, CONFIG_SYS_LBC_MRTPR); 135 sync(); 136 137 return msize; 138 } 139 140 #if defined(CONFIG_OF_BOARD_SETUP) 141 void ft_board_setup(void *blob, bd_t *bd) 142 { 143 ft_cpu_setup(blob, bd); 144 } 145 #endif 146 147 /* gpio mask for spi_cs */ 148 #define IDSCPLD_SPI_CS_MASK 0x00000001 149 /* spi_cs multiplexed through cpld */ 150 #define IDSCPLD_SPI_CS_BASE (CONFIG_SYS_CPLD_BASE + 0xf) 151 152 #if defined(CONFIG_MISC_INIT_R) 153 /* srp umcr mask for rts */ 154 #define IDSUMCR_RTS_MASK 0x04 155 int misc_init_r(void) 156 { 157 /*srp*/ 158 duart83xx_t *uart1 = &((immap_t *)CONFIG_SYS_IMMR)->duart[0]; 159 duart83xx_t *uart2 = &((immap_t *)CONFIG_SYS_IMMR)->duart[1]; 160 161 gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0]; 162 u8 *spi_base = (u8 *)IDSCPLD_SPI_CS_BASE; 163 164 /* deactivate spi_cs channels */ 165 out_8(spi_base, 0); 166 /* deactivate the spi_cs */ 167 setbits_be32(&iopd->dir, IDSCPLD_SPI_CS_MASK); 168 /*srp - deactivate rts*/ 169 out_8(&uart1->umcr, IDSUMCR_RTS_MASK); 170 out_8(&uart2->umcr, IDSUMCR_RTS_MASK); 171 172 173 gd->fdt_blob = (void *)CONFIG_SYS_FLASH_BASE; 174 return 0; 175 } 176 #endif 177 178 #ifdef CONFIG_MPC8XXX_SPI 179 /* 180 * The following are used to control the SPI chip selects 181 */ 182 int spi_cs_is_valid(unsigned int bus, unsigned int cs) 183 { 184 return bus == 0 && ((cs >= 0) && (cs <= 2)); 185 } 186 187 void spi_cs_activate(struct spi_slave *slave) 188 { 189 gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0]; 190 u8 *spi_base = (u8 *)IDSCPLD_SPI_CS_BASE; 191 192 /* select the spi_cs channel */ 193 out_8(spi_base, 1 << slave->cs); 194 /* activate the spi_cs */ 195 clrbits_be32(&iopd->dat, IDSCPLD_SPI_CS_MASK); 196 } 197 198 void spi_cs_deactivate(struct spi_slave *slave) 199 { 200 gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0]; 201 u8 *spi_base = (u8 *)IDSCPLD_SPI_CS_BASE; 202 203 /* select the spi_cs channel */ 204 out_8(spi_base, 1 << slave->cs); 205 /* deactivate the spi_cs */ 206 setbits_be32(&iopd->dat, IDSCPLD_SPI_CS_MASK); 207 } 208 #endif /* CONFIG_HARD_SPI */ 209