1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * (C) Copyright 2013 4 * Heiko Schocher, DENX Software Engineering, hs@denx.de. 5 * 6 * Based on: 7 * Copyright (c) 2011 IDS GmbH, Germany 8 * ids8313.c - ids8313 board support. 9 * 10 * Sergej Stepanov <ste@ids.de> 11 * Based on board/freescale/mpc8313erdb/mpc8313erdb.c 12 */ 13 14 #include <common.h> 15 #include <mpc83xx.h> 16 #include <spi.h> 17 #include <linux/libfdt.h> 18 19 DECLARE_GLOBAL_DATA_PTR; 20 /** CPLD contains the info about: 21 * - board type: *pCpld & 0xF0 22 * - hw-revision: *pCpld & 0x0F 23 * - cpld-revision: *pCpld+1 24 */ 25 int checkboard(void) 26 { 27 char *pcpld = (char *)CONFIG_SYS_CPLD_BASE; 28 u8 u8Vers = readb(pcpld); 29 u8 u8Revs = readb(pcpld + 1); 30 31 printf("Board: "); 32 switch (u8Vers & 0xF0) { 33 case '\x40': 34 printf("CU73X"); 35 break; 36 case '\x50': 37 printf("CC73X"); 38 break; 39 default: 40 printf("unknown(0x%02X, 0x%02X)\n", u8Vers, u8Revs); 41 return 0; 42 } 43 printf("\nInfo: HW-Rev: %i, CPLD-Rev: %i\n", 44 u8Vers & 0x0F, u8Revs & 0xFF); 45 return 0; 46 } 47 48 /* 49 * fixed sdram init 50 */ 51 int fixed_sdram(unsigned long config) 52 { 53 immap_t *im = (immap_t *)CONFIG_SYS_IMMR; 54 u32 msize = CONFIG_SYS_DDR_SIZE << 20; 55 56 #ifndef CONFIG_SYS_RAMBOOT 57 u32 msize_log2 = __ilog2(msize); 58 59 out_be32(&im->sysconf.ddrlaw[0].bar, 60 (CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000)); 61 out_be32(&im->sysconf.ddrlaw[0].ar, LBLAWAR_EN | (msize_log2 - 1)); 62 out_be32(&im->sysconf.ddrcdr, CONFIG_SYS_DDRCDR_VALUE); 63 sync(); 64 65 /* 66 * Erratum DDR3 requires a 50ms delay after clearing DDRCDR[DDR_cfg], 67 * or the DDR2 controller may fail to initialize correctly. 68 */ 69 udelay(50000); 70 71 out_be32(&im->ddr.csbnds[0].csbnds, (msize - 1) >> 24); 72 out_be32(&im->ddr.cs_config[0], config); 73 74 /* currently we use only one CS, so disable the other banks */ 75 out_be32(&im->ddr.cs_config[1], 0); 76 out_be32(&im->ddr.cs_config[2], 0); 77 out_be32(&im->ddr.cs_config[3], 0); 78 79 out_be32(&im->ddr.timing_cfg_3, CONFIG_SYS_DDR_TIMING_3); 80 out_be32(&im->ddr.timing_cfg_1, CONFIG_SYS_DDR_TIMING_1); 81 out_be32(&im->ddr.timing_cfg_2, CONFIG_SYS_DDR_TIMING_2); 82 out_be32(&im->ddr.timing_cfg_0, CONFIG_SYS_DDR_TIMING_0); 83 84 out_be32(&im->ddr.sdram_cfg, CONFIG_SYS_SDRAM_CFG); 85 out_be32(&im->ddr.sdram_cfg2, CONFIG_SYS_SDRAM_CFG2); 86 87 out_be32(&im->ddr.sdram_mode, CONFIG_SYS_DDR_MODE); 88 out_be32(&im->ddr.sdram_mode2, CONFIG_SYS_DDR_MODE_2); 89 90 out_be32(&im->ddr.sdram_interval, CONFIG_SYS_DDR_INTERVAL); 91 out_be32(&im->ddr.sdram_clk_cntl, CONFIG_SYS_DDR_CLK_CNTL); 92 sync(); 93 udelay(300); 94 95 /* enable DDR controller */ 96 setbits_be32(&im->ddr.sdram_cfg, SDRAM_CFG_MEM_EN); 97 /* now check the real size */ 98 disable_addr_trans(); 99 msize = get_ram_size(CONFIG_SYS_DDR_BASE, msize); 100 enable_addr_trans(); 101 #endif 102 return msize; 103 } 104 105 static int setup_sdram(void) 106 { 107 u32 msize = CONFIG_SYS_DDR_SIZE << 20; 108 long int size_01, size_02; 109 110 size_01 = fixed_sdram(CONFIG_SYS_DDR_CONFIG); 111 size_02 = fixed_sdram(CONFIG_SYS_DDR_CONFIG_256); 112 113 if (size_01 > size_02) 114 msize = fixed_sdram(CONFIG_SYS_DDR_CONFIG); 115 else 116 msize = size_02; 117 118 return msize; 119 } 120 121 int dram_init(void) 122 { 123 immap_t *im = (immap_t *)CONFIG_SYS_IMMR; 124 fsl_lbc_t *lbc = &im->im_lbc; 125 u32 msize = 0; 126 127 if ((in_be32(&im->sysconf.immrbar) & IMMRBAR_BASE_ADDR) != (u32)im) 128 return -ENXIO; 129 130 msize = setup_sdram(); 131 132 out_be32(&lbc->lbcr, CONFIG_SYS_LBC_LBCR); 133 out_be32(&lbc->mrtpr, CONFIG_SYS_LBC_MRTPR); 134 sync(); 135 136 gd->ram_size = msize; 137 138 return 0; 139 } 140 141 #if defined(CONFIG_OF_BOARD_SETUP) 142 int ft_board_setup(void *blob, bd_t *bd) 143 { 144 ft_cpu_setup(blob, bd); 145 146 return 0; 147 } 148 #endif 149 150 /* gpio mask for spi_cs */ 151 #define IDSCPLD_SPI_CS_MASK 0x00000001 152 /* spi_cs multiplexed through cpld */ 153 #define IDSCPLD_SPI_CS_BASE (CONFIG_SYS_CPLD_BASE + 0xf) 154 155 #if defined(CONFIG_MISC_INIT_R) 156 /* srp umcr mask for rts */ 157 #define IDSUMCR_RTS_MASK 0x04 158 int misc_init_r(void) 159 { 160 /*srp*/ 161 duart83xx_t *uart1 = &((immap_t *)CONFIG_SYS_IMMR)->duart[0]; 162 duart83xx_t *uart2 = &((immap_t *)CONFIG_SYS_IMMR)->duart[1]; 163 164 gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0]; 165 u8 *spi_base = (u8 *)IDSCPLD_SPI_CS_BASE; 166 167 /* deactivate spi_cs channels */ 168 out_8(spi_base, 0); 169 /* deactivate the spi_cs */ 170 setbits_be32(&iopd->dir, IDSCPLD_SPI_CS_MASK); 171 /*srp - deactivate rts*/ 172 out_8(&uart1->umcr, IDSUMCR_RTS_MASK); 173 out_8(&uart2->umcr, IDSUMCR_RTS_MASK); 174 175 176 gd->fdt_blob = (void *)CONFIG_SYS_FLASH_BASE; 177 return 0; 178 } 179 #endif 180 181 #ifdef CONFIG_MPC8XXX_SPI 182 /* 183 * The following are used to control the SPI chip selects 184 */ 185 int spi_cs_is_valid(unsigned int bus, unsigned int cs) 186 { 187 return bus == 0 && ((cs >= 0) && (cs <= 2)); 188 } 189 190 void spi_cs_activate(struct spi_slave *slave) 191 { 192 gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0]; 193 u8 *spi_base = (u8 *)IDSCPLD_SPI_CS_BASE; 194 195 /* select the spi_cs channel */ 196 out_8(spi_base, 1 << slave->cs); 197 /* activate the spi_cs */ 198 clrbits_be32(&iopd->dat, IDSCPLD_SPI_CS_MASK); 199 } 200 201 void spi_cs_deactivate(struct spi_slave *slave) 202 { 203 gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0]; 204 u8 *spi_base = (u8 *)IDSCPLD_SPI_CS_BASE; 205 206 /* select the spi_cs channel */ 207 out_8(spi_base, 1 << slave->cs); 208 /* deactivate the spi_cs */ 209 setbits_be32(&iopd->dat, IDSCPLD_SPI_CS_MASK); 210 } 211 #endif /* CONFIG_HARD_SPI */ 212