xref: /openbmc/u-boot/board/highbank/ahci.c (revision 23ff8633)
1 /*
2  * Copyright 2012 Calxeda, Inc.
3  *
4  * This program is free software; you can redistribute it and/or modify it
5  * under the terms of the GNU General Public License as published by the Free
6  * Software Foundation; either version 2 of the License, or (at your option)
7  * any later version.
8  *
9  * This program is distributed in the hope it will be useful, but WITHOUT
10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
12  * more details.
13  *
14  * You should have received a copy of the GNU General Public License along with
15  * this program.  If not, see <http://www.gnu.org/licenses/>.
16  */
17 
18 #include <common.h>
19 #include <ahci.h>
20 #include <asm/io.h>
21 
22 #define CPHY_MAP(dev, addr) ((((dev) & 0x1f) << 7) | (((addr) >> 9) & 0x7f))
23 #define CPHY_ADDR(base, dev, addr) ((base) | (((addr) & 0x1ff) << 2))
24 #define CPHY_BASE			0xfff58000
25 #define CPHY_WIDTH			0x1000
26 #define CPHY_DTE_XS			5
27 #define CPHY_MII			31
28 #define SERDES_CR_CTL			0x80a0
29 #define SERDES_CR_ADDR			0x80a1
30 #define SERDES_CR_DATA			0x80a2
31 #define CR_BUSY				0x0001
32 #define CR_START			0x0001
33 #define CR_WR_RDN			0x0002
34 #define CPHY_TX_INPUT_STS		0x2001
35 #define CPHY_RX_INPUT_STS		0x2002
36 #define CPHY_SATA_TX_OVERRIDE_BIT	0x8000
37 #define CPHY_SATA_RX_OVERRIDE_BIT	0x4000
38 #define CPHY_TX_INPUT_OVERRIDE		0x2004
39 #define CPHY_RX_INPUT_OVERRIDE		0x2005
40 #define SPHY_LANE			0x100
41 #define SPHY_HALF_RATE			0x0001
42 #define CPHY_SATA_DPLL_MODE		0x0700
43 #define CPHY_SATA_DPLL_SHIFT		8
44 #define CPHY_SATA_TX_ATTEN		0x1c00
45 #define CPHY_SATA_TX_ATTEN_SHIFT	10
46 
47 #define HB_SREG_SATA_ATTEN		0xfff3cf24
48 
49 #define SATA_PORT_BASE			0xffe08000
50 #define SATA_VERSIONR			0xf8
51 #define SATA_HB_VERSION			0x3332302a
52 
53 static u32 __combo_phy_reg_read(u8 phy, u8 dev, u32 addr)
54 {
55 	u32 data;
56 	writel(CPHY_MAP(dev, addr), CPHY_BASE + 0x800 + CPHY_WIDTH * phy);
57 	data = readl(CPHY_ADDR(CPHY_BASE + CPHY_WIDTH * phy, dev, addr));
58 	return data;
59 }
60 
61 static void __combo_phy_reg_write(u8 phy, u8 dev, u32 addr, u32 data)
62 {
63 	writel(CPHY_MAP(dev, addr), CPHY_BASE + 0x800 + CPHY_WIDTH * phy);
64 	writel(data, CPHY_ADDR(CPHY_BASE + CPHY_WIDTH * phy, dev, addr));
65 }
66 
67 static u32 combo_phy_read(u8 phy, u32 addr)
68 {
69 	u8 dev = CPHY_DTE_XS;
70 	if (phy == 5)
71 		dev = CPHY_MII;
72 	while (__combo_phy_reg_read(phy, dev, SERDES_CR_CTL) & CR_BUSY)
73 		udelay(5);
74 	__combo_phy_reg_write(phy, dev, SERDES_CR_ADDR, addr);
75 	__combo_phy_reg_write(phy, dev, SERDES_CR_CTL, CR_START);
76 	while (__combo_phy_reg_read(phy, dev, SERDES_CR_CTL) & CR_BUSY)
77 		udelay(5);
78 	return __combo_phy_reg_read(phy, dev, SERDES_CR_DATA);
79 }
80 
81 static void combo_phy_write(u8 phy, u32 addr, u32 data)
82 {
83 	u8 dev = CPHY_DTE_XS;
84 	if (phy == 5)
85 		dev = CPHY_MII;
86 	while (__combo_phy_reg_read(phy, dev, SERDES_CR_CTL) & CR_BUSY)
87 		udelay(5);
88 	__combo_phy_reg_write(phy, dev, SERDES_CR_ADDR, addr);
89 	__combo_phy_reg_write(phy, dev, SERDES_CR_DATA, data);
90 	__combo_phy_reg_write(phy, dev, SERDES_CR_CTL, CR_WR_RDN | CR_START);
91 }
92 
93 static void cphy_spread_spectrum_override(u8 phy, u8 lane, u32 val)
94 {
95 	u32 tmp;
96 	tmp = combo_phy_read(phy, CPHY_RX_INPUT_STS + lane * SPHY_LANE);
97 	tmp &= ~CPHY_SATA_RX_OVERRIDE_BIT;
98 	combo_phy_write(phy, CPHY_RX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp);
99 
100 	tmp |= CPHY_SATA_RX_OVERRIDE_BIT;
101 	combo_phy_write(phy, CPHY_RX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp);
102 
103 	tmp &= ~CPHY_SATA_DPLL_MODE;
104 	tmp |= (val << CPHY_SATA_DPLL_SHIFT) & CPHY_SATA_DPLL_MODE;
105 	combo_phy_write(phy, CPHY_RX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp);
106 }
107 
108 static void cphy_tx_attenuation_override(u8 phy, u8 lane)
109 {
110 	u32 val;
111 	u32 tmp;
112 	u8  shift;
113 
114 	shift = ((phy == 5) ? 4 : lane) * 4;
115 
116 	val = (readl(HB_SREG_SATA_ATTEN) >> shift) & 0xf;
117 
118 	if (val & 0x8)
119 		return;
120 
121 	tmp = combo_phy_read(phy, CPHY_TX_INPUT_STS + lane * SPHY_LANE);
122 	tmp &= ~CPHY_SATA_TX_OVERRIDE_BIT;
123 	combo_phy_write(phy, CPHY_TX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp);
124 
125 	tmp |= CPHY_SATA_TX_OVERRIDE_BIT;
126 	combo_phy_write(phy, CPHY_TX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp);
127 
128 	tmp |= (val << CPHY_SATA_TX_ATTEN_SHIFT) & CPHY_SATA_TX_ATTEN;
129 	combo_phy_write(phy, CPHY_TX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp);
130 }
131 
132 static void cphy_disable_port_overrides(u8 port)
133 {
134 	u32 tmp;
135 	u8 lane = 0, phy = 0;
136 
137 	if (port == 0)
138 		phy = 5;
139 	else if (port < 5)
140 		lane = port - 1;
141 	else
142 		return;
143 	tmp = combo_phy_read(phy, CPHY_RX_INPUT_STS + lane * SPHY_LANE);
144 	tmp &= ~CPHY_SATA_RX_OVERRIDE_BIT;
145 	combo_phy_write(phy, CPHY_RX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp);
146 
147 	tmp = combo_phy_read(phy, CPHY_TX_INPUT_OVERRIDE + lane * SPHY_LANE);
148 	tmp &= ~CPHY_SATA_TX_OVERRIDE_BIT;
149 	combo_phy_write(phy, CPHY_TX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp);
150 }
151 
152 void cphy_disable_overrides(void)
153 {
154 	int i;
155 	u32 port_map;
156 
157 	port_map = readl(0xffe08000 + HOST_PORTS_IMPL);
158 	for (i = 0; i < 5; i++) {
159 		if (port_map & (1 << i))
160 			cphy_disable_port_overrides(i);
161 	}
162 }
163 
164 static void cphy_override_lane(u8 port)
165 {
166 	u32 tmp, k = 0;
167 	u8 lane = 0, phy = 0;
168 
169 	if (port == 0)
170 		phy = 5;
171 	else if (port < 5)
172 		lane = port - 1;
173 	else
174 		return;
175 
176 	do {
177 		tmp = combo_phy_read(0, CPHY_RX_INPUT_STS +
178 					lane * SPHY_LANE);
179 	} while ((tmp & SPHY_HALF_RATE) && (k++ < 1000));
180 	cphy_spread_spectrum_override(phy, lane, 3);
181 	cphy_tx_attenuation_override(phy, lane);
182 }
183 
184 #define WAIT_MS_LINKUP	4
185 
186 int ahci_link_up(struct ahci_probe_ent *probe_ent, int port)
187 {
188 	u32 tmp;
189 	int j = 0;
190 	u8 *port_mmio = (u8 *)probe_ent->port[port].port_mmio;
191 	u32 is_highbank = readl(SATA_PORT_BASE + SATA_VERSIONR) ==
192 				SATA_HB_VERSION ? 1 : 0;
193 
194 	/* Bring up SATA link.
195 	 * SATA link bringup time is usually less than 1 ms; only very
196 	 * rarely has it taken between 1-2 ms. Never seen it above 2 ms.
197 	 */
198 	while (j < WAIT_MS_LINKUP) {
199 		if (is_highbank && (j == 0)) {
200 			cphy_disable_port_overrides(port);
201 			writel(0x301, port_mmio + PORT_SCR_CTL);
202 			udelay(1000);
203 			writel(0x300, port_mmio + PORT_SCR_CTL);
204 			udelay(1000);
205 			cphy_override_lane(port);
206 		}
207 
208 		tmp = readl(port_mmio + PORT_SCR_STAT);
209 		if ((tmp & 0xf) == 0x3)
210 			return 0;
211 		udelay(1000);
212 		j++;
213 
214 		if ((j == WAIT_MS_LINKUP) && (tmp & 0xf))
215 			j = 0;	/* retry phy reset */
216 	}
217 	return 1;
218 }
219