1 /* 2 * Copyright (C) 2015-2016 Freescale Semiconductor, Inc. 3 * Copyright (C) 2016 Grinn 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #include <asm/arch/clock.h> 9 #include <asm/arch/iomux.h> 10 #include <asm/arch/imx-regs.h> 11 #include <asm/arch/crm_regs.h> 12 #include <asm/arch/mx6ul_pins.h> 13 #include <asm/arch/mx6-pins.h> 14 #include <asm/arch/sys_proto.h> 15 #include <asm/gpio.h> 16 #include <asm/imx-common/iomux-v3.h> 17 #include <asm/imx-common/boot_mode.h> 18 #include <asm/io.h> 19 #include <common.h> 20 #include <fsl_esdhc.h> 21 #include <linux/sizes.h> 22 #include <linux/fb.h> 23 #include <mach/litesom.h> 24 #include <miiphy.h> 25 #include <mmc.h> 26 #include <netdev.h> 27 #include <spl.h> 28 #include <usb.h> 29 #include <usb/ehci-ci.h> 30 31 DECLARE_GLOBAL_DATA_PTR; 32 33 #define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ 34 PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ 35 PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) 36 37 #define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ 38 PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \ 39 PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) 40 41 #define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \ 42 PAD_CTL_SPEED_HIGH | \ 43 PAD_CTL_DSE_48ohm | PAD_CTL_SRE_FAST) 44 45 #define MDIO_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \ 46 PAD_CTL_DSE_48ohm | PAD_CTL_SRE_FAST | PAD_CTL_ODE) 47 48 #define ENET_CLK_PAD_CTRL (PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST) 49 50 static iomux_v3_cfg_t const uart1_pads[] = { 51 MX6_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL), 52 MX6_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL), 53 }; 54 55 static iomux_v3_cfg_t const sd_pads[] = { 56 MX6_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), 57 MX6_PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), 58 MX6_PAD_SD1_DATA0__USDHC1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 59 MX6_PAD_SD1_DATA1__USDHC1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 60 MX6_PAD_SD1_DATA2__USDHC1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 61 MX6_PAD_SD1_DATA3__USDHC1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), 62 63 /* CD */ 64 MX6_PAD_UART1_RTS_B__GPIO1_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL), 65 }; 66 67 #ifdef CONFIG_FEC_MXC 68 static iomux_v3_cfg_t const fec1_pads[] = { 69 MX6_PAD_GPIO1_IO06__ENET1_MDIO | MUX_PAD_CTRL(MDIO_PAD_CTRL), 70 MX6_PAD_GPIO1_IO07__ENET1_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), 71 MX6_PAD_ENET1_TX_DATA0__ENET1_TDATA00 | MUX_PAD_CTRL(ENET_PAD_CTRL), 72 MX6_PAD_ENET1_TX_DATA1__ENET1_TDATA01 | MUX_PAD_CTRL(ENET_PAD_CTRL), 73 MX6_PAD_ENET1_TX_EN__ENET1_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL), 74 MX6_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 | MUX_PAD_CTRL(ENET_CLK_PAD_CTRL), 75 MX6_PAD_ENET1_RX_DATA0__ENET1_RDATA00 | MUX_PAD_CTRL(ENET_PAD_CTRL), 76 MX6_PAD_ENET1_RX_DATA1__ENET1_RDATA01 | MUX_PAD_CTRL(ENET_PAD_CTRL), 77 MX6_PAD_ENET1_RX_ER__ENET1_RX_ER | MUX_PAD_CTRL(ENET_PAD_CTRL), 78 MX6_PAD_ENET1_RX_EN__ENET1_RX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL), 79 }; 80 81 static void setup_iomux_fec(void) 82 { 83 imx_iomux_v3_setup_multiple_pads(fec1_pads, ARRAY_SIZE(fec1_pads)); 84 } 85 #endif 86 87 static void setup_iomux_uart(void) 88 { 89 imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); 90 } 91 92 #ifdef CONFIG_FSL_ESDHC 93 static struct fsl_esdhc_cfg sd_cfg = {USDHC1_BASE_ADDR, 0, 4}; 94 95 #define SD_CD_GPIO IMX_GPIO_NR(1, 19) 96 97 static int mmc_get_env_devno(void) 98 { 99 u32 soc_sbmr = readl(SRC_BASE_ADDR + 0x4); 100 int dev_no; 101 u32 bootsel; 102 103 bootsel = (soc_sbmr & 0x000000FF) >> 6; 104 105 /* If not boot from sd/mmc, use default value */ 106 if (bootsel != 1) 107 return CONFIG_SYS_MMC_ENV_DEV; 108 109 /* BOOT_CFG2[3] and BOOT_CFG2[4] */ 110 dev_no = (soc_sbmr & 0x00001800) >> 11; 111 112 return dev_no; 113 } 114 115 int board_mmc_getcd(struct mmc *mmc) 116 { 117 struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; 118 int ret = 0; 119 120 switch (cfg->esdhc_base) { 121 case USDHC1_BASE_ADDR: 122 ret = !gpio_get_value(SD_CD_GPIO); 123 break; 124 case USDHC2_BASE_ADDR: 125 ret = 1; 126 break; 127 } 128 129 return ret; 130 } 131 132 int board_mmc_init(bd_t *bis) 133 { 134 int ret; 135 136 /* SD */ 137 imx_iomux_v3_setup_multiple_pads(sd_pads, ARRAY_SIZE(sd_pads)); 138 gpio_direction_input(SD_CD_GPIO); 139 sd_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); 140 141 ret = fsl_esdhc_initialize(bis, &sd_cfg); 142 if (ret) { 143 printf("Warning: failed to initialize mmc dev 0 (SD)\n"); 144 return ret; 145 } 146 147 return litesom_mmc_init(bis); 148 } 149 150 static int check_mmc_autodetect(void) 151 { 152 char *autodetect_str = getenv("mmcautodetect"); 153 154 if ((autodetect_str != NULL) && 155 (strcmp(autodetect_str, "yes") == 0)) { 156 return 1; 157 } 158 159 return 0; 160 } 161 162 void board_late_mmc_init(void) 163 { 164 char cmd[32]; 165 char mmcblk[32]; 166 u32 dev_no = mmc_get_env_devno(); 167 168 if (!check_mmc_autodetect()) 169 return; 170 171 setenv_ulong("mmcdev", dev_no); 172 173 /* Set mmcblk env */ 174 sprintf(mmcblk, "/dev/mmcblk%dp2 rootwait rw", 175 dev_no); 176 setenv("mmcroot", mmcblk); 177 178 sprintf(cmd, "mmc dev %d", dev_no); 179 run_command(cmd, 0); 180 } 181 #endif 182 183 #ifdef CONFIG_FEC_MXC 184 int board_eth_init(bd_t *bis) 185 { 186 setup_iomux_fec(); 187 188 return fecmxc_initialize(bis); 189 } 190 191 static int setup_fec(void) 192 { 193 struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; 194 int ret; 195 196 /* Use 50M anatop loopback REF_CLK1 for ENET1, clear gpr1[13], 197 set gpr1[17]*/ 198 clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC1_MASK, 199 IOMUX_GPR1_FEC1_CLOCK_MUX1_SEL_MASK); 200 201 ret = enable_fec_anatop_clock(0, ENET_50MHZ); 202 if (ret) 203 return ret; 204 205 enable_enet_clk(1); 206 207 return 0; 208 } 209 #endif 210 211 #ifdef CONFIG_USB_EHCI_MX6 212 int board_usb_phy_mode(int port) 213 { 214 return USB_INIT_HOST; 215 } 216 #endif 217 218 int board_early_init_f(void) 219 { 220 setup_iomux_uart(); 221 222 return 0; 223 } 224 225 int board_init(void) 226 { 227 /* Address of boot parameters */ 228 gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; 229 230 #ifdef CONFIG_FEC_MXC 231 setup_fec(); 232 #endif 233 234 return 0; 235 } 236 237 #ifdef CONFIG_CMD_BMODE 238 static const struct boot_mode board_boot_modes[] = { 239 /* 4 bit bus width */ 240 {"sd", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x00)}, 241 {"emmc", MAKE_CFGVAL(0x60, 0x48, 0x00, 0x00)}, 242 {NULL, 0}, 243 }; 244 #endif 245 246 int board_late_init(void) 247 { 248 #ifdef CONFIG_CMD_BMODE 249 add_board_boot_modes(board_boot_modes); 250 #endif 251 252 #ifdef CONFIG_ENV_IS_IN_MMC 253 board_late_mmc_init(); 254 #endif 255 256 return 0; 257 } 258 259 int checkboard(void) 260 { 261 puts("Board: Grinn liteBoard\n"); 262 263 return 0; 264 } 265 266 #ifdef CONFIG_SPL_BUILD 267 void board_boot_order(u32 *spl_boot_list) 268 { 269 struct src *psrc = (struct src *)SRC_BASE_ADDR; 270 unsigned gpr10_boot = readl(&psrc->gpr10) & (1 << 28); 271 unsigned reg = gpr10_boot ? readl(&psrc->gpr9) : readl(&psrc->sbmr1); 272 unsigned port = (reg >> 11) & 0x1; 273 274 if (port == 0) { 275 spl_boot_list[0] = BOOT_DEVICE_MMC1; 276 spl_boot_list[1] = BOOT_DEVICE_MMC2; 277 } else { 278 spl_boot_list[0] = BOOT_DEVICE_MMC2; 279 spl_boot_list[1] = BOOT_DEVICE_MMC1; 280 } 281 } 282 283 void board_init_f(ulong dummy) 284 { 285 litesom_init_f(); 286 } 287 #endif 288