1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ 4 * Copyright (C) 2017, Grinn - http://grinn-global.com/ 5 */ 6 7 #include <common.h> 8 #include <asm/arch/chilisom.h> 9 #include <asm/arch/cpu.h> 10 #include <asm/arch/hardware.h> 11 #include <asm/arch/omap.h> 12 #include <asm/arch/mem.h> 13 #include <asm/arch/mmc_host_def.h> 14 #include <asm/arch/mux.h> 15 #include <asm/arch/sys_proto.h> 16 #include <asm/emif.h> 17 #include <asm/io.h> 18 #include <cpsw.h> 19 #include <environment.h> 20 #include <errno.h> 21 #include <miiphy.h> 22 #include <spl.h> 23 #include <watchdog.h> 24 25 DECLARE_GLOBAL_DATA_PTR; 26 27 static __maybe_unused struct ctrl_dev *cdev = 28 (struct ctrl_dev *)CTRL_DEVICE_BASE; 29 30 #ifndef CONFIG_SKIP_LOWLEVEL_INIT 31 static struct module_pin_mux uart0_pin_mux[] = { 32 {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */ 33 {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */ 34 {-1}, 35 }; 36 37 static struct module_pin_mux mmc0_pin_mux[] = { 38 {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */ 39 {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */ 40 {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */ 41 {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */ 42 {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */ 43 {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */ 44 {-1}, 45 }; 46 47 static struct module_pin_mux rmii1_pin_mux[] = { 48 {OFFSET(mii1_crs), MODE(1) | RXACTIVE}, /* RMII1_CRS */ 49 {OFFSET(mii1_rxerr), MODE(1) | RXACTIVE}, /* RMII1_RXERR */ 50 {OFFSET(mii1_txen), MODE(1)}, /* RMII1_TXEN */ 51 {OFFSET(mii1_txd1), MODE(1)}, /* RMII1_TXD1 */ 52 {OFFSET(mii1_txd0), MODE(1)}, /* RMII1_TXD0 */ 53 {OFFSET(mii1_rxd1), MODE(1) | RXACTIVE}, /* RMII1_RXD1 */ 54 {OFFSET(mii1_rxd0), MODE(1) | RXACTIVE}, /* RMII1_RXD0 */ 55 {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */ 56 {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */ 57 {OFFSET(rmii1_refclk), MODE(0) | RXACTIVE}, /* RMII1_REFCLK */ 58 {-1}, 59 }; 60 61 static void enable_board_pin_mux(void) 62 { 63 chilisom_enable_pin_mux(); 64 65 /* chiliboard pinmux */ 66 configure_module_pin_mux(rmii1_pin_mux); 67 configure_module_pin_mux(mmc0_pin_mux); 68 } 69 #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ 70 71 #ifndef CONFIG_SKIP_LOWLEVEL_INIT 72 void set_uart_mux_conf(void) 73 { 74 configure_module_pin_mux(uart0_pin_mux); 75 } 76 77 void set_mux_conf_regs(void) 78 { 79 enable_board_pin_mux(); 80 } 81 82 void am33xx_spl_board_init(void) 83 { 84 chilisom_spl_board_init(); 85 } 86 #endif 87 88 /* 89 * Basic board specific setup. Pinmux has been handled already. 90 */ 91 int board_init(void) 92 { 93 #if defined(CONFIG_HW_WATCHDOG) 94 hw_watchdog_init(); 95 #endif 96 97 gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; 98 gpmc_init(); 99 100 return 0; 101 } 102 103 #ifdef CONFIG_BOARD_LATE_INIT 104 int board_late_init(void) 105 { 106 #if !defined(CONFIG_SPL_BUILD) 107 uint8_t mac_addr[6]; 108 uint32_t mac_hi, mac_lo; 109 110 /* try reading mac address from efuse */ 111 mac_lo = readl(&cdev->macid0l); 112 mac_hi = readl(&cdev->macid0h); 113 mac_addr[0] = mac_hi & 0xFF; 114 mac_addr[1] = (mac_hi & 0xFF00) >> 8; 115 mac_addr[2] = (mac_hi & 0xFF0000) >> 16; 116 mac_addr[3] = (mac_hi & 0xFF000000) >> 24; 117 mac_addr[4] = mac_lo & 0xFF; 118 mac_addr[5] = (mac_lo & 0xFF00) >> 8; 119 120 if (!env_get("ethaddr")) { 121 printf("<ethaddr> not set. Validating first E-fuse MAC\n"); 122 123 if (is_valid_ethaddr(mac_addr)) 124 eth_env_set_enetaddr("ethaddr", mac_addr); 125 } 126 127 mac_lo = readl(&cdev->macid1l); 128 mac_hi = readl(&cdev->macid1h); 129 mac_addr[0] = mac_hi & 0xFF; 130 mac_addr[1] = (mac_hi & 0xFF00) >> 8; 131 mac_addr[2] = (mac_hi & 0xFF0000) >> 16; 132 mac_addr[3] = (mac_hi & 0xFF000000) >> 24; 133 mac_addr[4] = mac_lo & 0xFF; 134 mac_addr[5] = (mac_lo & 0xFF00) >> 8; 135 136 if (!env_get("eth1addr")) { 137 if (is_valid_ethaddr(mac_addr)) 138 eth_env_set_enetaddr("eth1addr", mac_addr); 139 } 140 #endif 141 142 return 0; 143 } 144 #endif 145